Display Information
Indicates Dolby Noise Reduction
activation
Indicates Tape play
CD-## Indicates CD number playing
(e.g., CD-01, CD-02, etc.)
TR-## Indicates CD track number
playing (e.g., TR-01, TR-02, etc.)
##-## Indicates CD number and track
number playing (e.g., 03-10
means disc 3-track 10, etc.)
NO DISC Indicates CD changer is empty
C Indicates CD compression factor
activation
NO CD Indicates empty slot, mechanical
error, unreadable disc, focus
error.
NO DJ Indicates CD changer not
connected or not communicating
AM, FM1 or FM2 Indicates which frequency band
the audio system is in
87.9 to 107.9
(530 to 1610
AM)Indicates currently playing radio
station
STIndicates stereo operation
Illuminated bars Indicates volume, relative level of
bass and treble and relative levels
of speaker balance and fade
TD E1 Indicates possible problem tape
TD E2 Radio cannot eject tape
TD E3 Radio cannot insert tape properly
TOO HOT Changer's internal temperature is
above 60ÉC (140ÉF)
The display screen gives information on the status of
the audio system.
dno_display-chart
Display
17
modulation.º Signal modulation is a process radio
stations use to increase their strength/volume
relative to other stations.
²Terrain. Hills, mountains and tall buildings
between your vehicle's antenna and the radio
station signal can cause FM reception problems.
Static can be caused on AM stations by power
lines, electric fences, traffic lights, driving under
bridges and thunderstorms. Moving away from an
interfering structure (out of its ªshadowº) returns
your reception to normal.
²Station overload. Weak stations are sometimes
captured by stronger stations when you pass a
broadcast tower. A stronger station may
temporarily overtake a weaker station and play
while the weak station frequency is displayed.
The audio system automatically switches to single
channel reception if it will improve the reception of
a station normally received in stereo.
Radio frequency information
20
