Page 3886 of 4133

switch pressed for 5 to 10 seconds.
6. Normalize power windows. Completely close each wi ndow with manual switch. Hold switch in closed
position for 5 seconds.
Coding radio
Hi-Line Premium With Bose(R)
1. Turn ignition on. CODE will appear on radio displa y. Enter first code number with station button. For
example, station button 1 is number 1.
2. After entering first number, CODE will disappear and first number entered will appear followed by 4
dashes. The next character to be entered flashes. Repeat procedure until all numbers are entered.
3. If an input error has occurred it can be corrected at this time by reentering the complete correct code.
4. Confirm entry of correct code with < or > button.
5. If an incorrect code number has been entered, CODE appears again on display. If an incorrect code is
entered 3 times, WAIT appears on display and ra dio locks up for approximately 10 minutes. If an
incorrect code is entered 3 times again, lock time increases to 60 mi nutes. Radio must remain switched on
during lock up time.
MB
1. Turn ignition on. CODE will appear on radio displa y. Enter first code number with station button. For
example, station button 1 is number 1.
2. After entering first number, CODE will disappear and first number entered will appear followed by 4
dashes. The next character to be entered flashes.
3. After entering all 5 numbers the first character starts flashing again. If an input error has occurred it can
be corrected at this time by reentering the complete correct code.
4. Press TUNE, AUTO/SEEK or SC butt on. If code is correct, radio automatically switches on and indicates
the station or frequency stored wi th station button 1. If an incorrect code number has been entered, CODE
appears again on display. If an inco rrect code is entered 3 times, WAIT appears on display and radio
locks up for approximately 10 minutes. If an incorrect code is entered 3 times again, radio locks up for
approximately 10 additional minutes. After 9 incorrec t attempts, lock time increases to 60 minutes.
Another 3 incorrect entries locks up radio for anothe r 60 minutes. Radio must remain switched on during
lock up time.
RETRIEVING & ER ASING DIAGNOSTIC TROUBLE CODES
RETRIEVING DIAGNOSTIC TROUBLE CODES
NOTE: Before replacing any component that scan tool suggests are faulty, ensure that
all wiring connections and harness connect ors are okay. Ensure that power and
ground circuits are functioning properl y. For circuit identification, see
appropriate WIRING DIAGRAM unde r ENGINE PERFORMANCE in SYSTEM
WIRING DIAGRAMS for vehicle being tested.
2001 Mercedes-Benz ML320
2001-04 STARTING & CHARGING SYSTEMS Starters - 163 Chassis
me
Saturday, October 02, 2010 3:19:47 PMPage 4 © 2006 Mitchell Repair Information Company, LLC.
Page 3983 of 4133

10
Remove edge guard for tilting/sliding roof
cutout
11
Release upper right B-pillar paneling
12
Remove covers at lower rear seat
Do NOT remove center cover for lower
40% seat. Do NOT reinstall curtain on 60%
front bench seat.
f
Remove and install cover on bottom of rear
seat
AR91.12-P-1100GH
13
Release side shade at the 60% bench
Fold shade upward so that the working
area is not obstructed.
14
Remove 40% rear seat
f
Remove and install bench
AR91.12-P-1010GI
Torx bit set
*000589011000
Install
15
Retrofit central interface module (1)
AZ82.60-P-0004-01A
16
Insert antenna cable for FM modulator (6) into
vehicle antenna cable (7)
17
Cover connector with self-adhesive foamed
material (8)
18
Plug remaining antenna cable of FM
modulator (9) into radio
19
Install radio (A2)
f
Remove/install radio
AR82.60-P-7502EA
20
Retrofit video monitor (2) and wiring harness
of video monitor (C)
With
glass version of electric sliding/tilting
roof, code 414a.
AZ82.60-P-0004-02A
Except
glass version of electric
sliding/tilting roof, code 414a.
AZ82.60-P-0004-02B
21
Secure upper right B-pillar paneling
Ensure that the lugs of the seat belt height
adjustment are located correctly in the recess
clearance of the paneling.
22
Install right front handle
23
Install right sun visor
f
Remove/install sun visor
AR68.60-P-5480GH
24
Install right front A-pillar cover
f
Remove/install paneling on A-pillar
AR68.30-P-4050GH
25
Re-secure upper area of rubber door seal
26
Route wiring harness of video/DVD player
(B), additional interface module (4) and wiring
harness of video monitor (C) later
Up to VIN A289564, X754619.
AZ82.60-P-0004-03A
As of VIN A289565, X754620.
AZ82.60-P-0004-03B
27
Retrofit auxiliary interface module (4) in
center console
Up to VIN A289564, X754619.
AZ82.60-P-0004-04A
As of VIN A289565, X754620.
AZ82.60-P-0004-04B
28
Install center console insulating mat
29
Install center console
f
Remove/install center console
AR68.20-P-2000GH
30.1
Plug in plug of additional interface module
and secure the wiring harness of the
additional interface module (10) to the clip
(11) together with the wiring harness of the
rear power windows in the center console
Up to VIN A289564, X754619.
30.2
Insert auxiliary interface module (13)
connector and route between center console
mount (14) and center console.
As of VIN A289565, X754620.
31.1
Secure auxiliary interface module plug in the
left rear corner of the ashtray housing using
self-adhesive foamed material (12)
Up to VIN A289564, X754619.
32
Open ashtray and cup holder and close to
check correct function
33
Attach side shade of the 60% bench
34.1
Retrofit video player (3)
AZ82.60-P-0004-05A
*BA91.12-P-1005-03A
*BA91.12-P-1008-03A
34.2
Retrofit DVD player
AZ82.60-P-0005-01GH
35
Install 40% rear seat
f
Remove and install bench
AR91.12-P-1010GI
Torx bit set
*000589011000
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 2
Page 4097 of 4133
Fig. 49: Single Panel Sunroof Circuit
POWER WINDOWS
2001 Mercedes-Benz ML320
2001 SYSTEM WIRING DIAGRAMS Mercedes-Benz - ML320
me
Saturday, October 02, 2010 3:28:00 PMPage 99 © 2006 Mitchell Repair Information Company, LLC.
Page 4099 of 4133
Fig. 50: Power Windows Circuit
2001 Mercedes-Benz ML320
2001 SYSTEM WIRING DIAGRAMS Mercedes-Benz - ML320
me
Saturday, October 02, 2010 3:28:00 PMPage 101 © 2006 Mitchell Repair Information Company, LLC.
Page 4101 of 4133
Fig. 51: Rear Quarter Windows Circuit
RADIO
2001 Mercedes-Benz ML320
2001 SYSTEM WIRING DIAGRAMS Mercedes-Benz - ML320
me
Saturday, October 02, 2010 3:28:00 PMPage 103 © 2006 Mitchell Repair Information Company, LLC.