T J21 TACHOGRAF 1 TAG / 2 FAHRER (EG)
P J22 STEUERCODE WERK RASTATT/MERCOSUL
T J22 TACHOGRAF 1 TAG / 2 FAHRER (EG) KM/MEILEN
P J23 STEUERCODE WERK RASTATT/MERCOSUL
P J24 STEUERCODE WERK RASTATT/MERCOSUL
P J25 STEUERCODE WERK RASTATT/MERCOSUL
P J26 STEUERCODE WERK RASTATT/MERCOSUL
P J27 STEUERCODE WERK RASTATT/MERCOSUL
T J28 TACHOGRAF 1 TAG / 2 FAHRER MIT ZUSATZSCHREIBER
P J28 STEUERCODE WERK RASTATT/MERCOSUL
T J29 TACHOGRAF 1 TAG / 1 FAHRER MIT ZUSATZSCHREIBER
P J29 STEUERCODE WERK RASTATT/MERCOSUL
P J30 STEUERCODE WERK RASTATT/MERCOSUL
P J31 STEUERCODE WERK RASTATT/MERCOSUL
P J32 STEUERCODE WERK RASTATT/MERCOSUL
P J33 STEUERCODE WERK RASTATT/MERCOSUL
P J34 STEUERCODE WERK RASTATT/MERCOSUL
P J35 STEUERCODE WERK RASTATT/MERCOSUL
P J36 STEUERCODE WERK RASTATT/MERCOSUL
P J37 STEUERCODE WERK RASTATT/MERCOSUL
T J38 DREHZAHLMESSER
P J38 STEUERCODE WERK RASTATT/MERCOSUL
P J39 STEUERCODE WERK RASTATT/MERCOSUL
P J40 STEUERCODE WERK RASTATT/MERCOSUL
T J40 KOMBIINSTRUMENT M.INTEGR.OELDRUCK- U.AUSSENTEMP.
P J41 STEUERCODE WERK RASTATT/MERCOSUL
P J42 STEUERCODE WERK RASTATT/MERCOSUL
P J43 STEUERCODE WERK RASTATT/MERCOSUL
T J44 ULTRASCHALL-RUECKFAHRHILFE
P J44 STEUERCODE WERK RASTATT/MERCOSUL
P J45 STEUERCODE WERK RASTATT/MERCOSUL
P J46 STEUERCODE WERK RASTATT/MERCOSUL
P J47 STEUERCODE WERK RASTATT/MERCOSUL
P J48 STEUERCODE WERK RASTATT/MERCOSUL
P J49 SONDERBEDARF OHNE PAI AUFTRAG
P J50 DOKUMENTATION 4-MATIC GETRIEBE IM ASSY
P J52 KUNDENTAUGLICHE MOTOREN 166.940/960
P J57 GETRIEBE ABSCHIRMBLECH A-KLASSE
T J58 WARNEINRICHTUNG FUER SICHERHEITSGURTE
T J59 WARNEINRICHTUNG FUER GESCHWINDIGKEITSBEGRENZUNG
P J60 DOKUMENTATION GETRIEBE BR 220
T J61 PRUEFANSCHLUSS HYDRAULIKBREMSE
P J62 WANDLER / GETRIEBEGEHAEUSE
P J63 STIRNRAD / ANTRIEBSWELLE
T J64 WARTUNGSANZEIGE FUER TROCKENLUFTFILTER
T J65 AUSSENTEMPERATURANZEIGE
T J67 EINBRUCH-/DIEBSTAHLWARNANLAGE (EDW1)
P J67 SCHWUNGMASSE FSG
T J75 TONFOLGEANLAGE FEUERWEHR
P J75 ZYL.KOPFHAUBE / MOTORABDECKUNG
P J76 EINMASSENSCHWUNGRAD OM668
P J77 NEUE LENKHELFPUMPE OM664 IN CHYRSLER PT CRUISER
P J78 KUNDENTAUGLICHKEIT
T J78 PLOMBIERUNG TACHOANTRIEB
P J79 GENERATOR/MOTORTRAEGER/MOTOR-/STARTER-LEITUNGSSATZ
P J80 SERIE: ZWEIMASSENSCHWUNGRAD OM668
P J81 GEAENDERTE OELBEFUELLUNG OM613
P J82 VOLLASTENTLUEFTUNG OM668
P J83 ABGASTURBOLADER / STECKVERBINDUNG OM611/612/613
P J84 VERLAENGERUNG HEIZWASSERSTUTZEN M111
P J85 KUNDENTAUGLICHKEIT OM612
P J86 GROSSE UNTERDRUCKPUMPE OM612/613/628
P J87 NEUER MOTORLEITUNGSSATZ M112
T J88 WEGSTRECKENZAEHLER GEEICHT UND PLOMBIERT
T J89 VORRUEST.F.WEGSTRECKENZAEHLER GEEICHT U. PLOMBIERT
SI47.10-P-0004A
Service Information: Procedure when tank is filled with incorrect fuel
19.12.00
MODEL
202 with ENGINE 611
MODEL
203 with ENGINE 611, 612, 646
MODEL
210 with ENGINE 611, 612, 613
MODEL
220 with ENGINE 613, 628, 648
MODEL
163 with ENGINE 612, 628
MODEL
168 with ENGINE 668
MODEL
209 with ENGINE 612
MODEL
211 with ENGINE 628, 646, 647, 648
MODEL
463 with ENGINE 612, 628
Modification notes
26.7.04
Engines have been added and procedure has been updated
Incorrect refueling of diesel-power vehicles with a common rail
injection system. Please be aware that if the customer fills the fuel
tank with the wrong type of fuel, this is the customer's fault and
cannot be submitted as a warranty claim.
If the diesel-powered vehicle with a common rail injection system has
been refueled with gasoline, follow the steps below:
1.
If the engine was not started after fuel tank is filled with the wrong
type of fuel, then emptying the fuel tank and cleaning the fuel low-
pressure lines should be enough to solve the problem.
2.
If the engine was started after fuel tank was filled with wrong type
of fuel:
On engines 611, 612, 613, 668:
-
On the rail, open the low pressure connection of the high
pressure pump return (plastic connection in area of pressure
regulator valve) and check connecting point in rail for chips.
On engine 646, 647, 648, 628:
-
Disconnect Y-distributor unit (return line HDP/Rail) at the output
and, with ignition ON, collect the fuel in a clean container. Check
fuel for metal shavings.
If the high pressure pump is not damaged and there are no metal
shavings in the injection system:
-
As in step 1, empty fuel as per the guidelines and clean the fuel
low-pressure lines. In addition to this, remove/install/replace the
high-pressure pump and fuel filter.
If metal shavings are found in the fuel
system or the high pressure pump drive is
damaged:
#
b
Engine runs rough, surges or does not start
ENGINE 611 in MODEL 203, 202, 210
ENGINE 612 in MODEL 163, 203, 210, 209
ENGINE 613 in MODEL 210, 220
ENGINE 628 in MODEL 163, 220, 211
ENGINE 646 in MODEL 203, 211
ENGINE 647 in MODEL 211
ENGINE 648 in MODEL 220, 211
ENGINE 668 in MODEL 168
ENGINE 612, 628 in MODEL 463
AF07.00-P-9000B
Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
