1997 MERCEDES-BENZ ML320 seat memory

106 Controls in detailMemory function*Storing parking position
Stop the vehicle.

Switch on ignition (if not already on).

Press button2.
The passenger-side exterior rear view
mirror is selected.

Adjust the exterior rear view mirror
with button3 so that you see the rear
wheel and the road curb.

Press memory button2 (
page 105).

Within three seconds, press bottom of
adjustment button3.
The parking position is stored if the
mirror does not move.
Storing positions in memory
Adjust the seat (
page 37) and exteri-
or rear view mirrors (page 40) to the
desired position.

Push memory button2 (
page 105).

Release memory button and press one
of the position buttons1 within three
seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
Press and hold one of the position
buttons1 until seat and rear view mir-
rors have fully moved to the stored po-
sitions.
iIf the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.
The selected position will be stored rel-
ative to the position button1
(page 105) pressed.
!Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.iReleasing the button immediately
stops movement to the stored posi-
tions.

313 Technical terms
GVWR
(G
ross V
ehicle W
eight R
ating)
This is the maximum permissible vehi-
cle weight. It is indicated on certifica-
tion label located on the driver’s door
pillar.
Instrument cluster
The displays and indicator / warning
lamps in the driver’s field of vision, in-
cluding the tachometer, speedometer,
engine temperature and fuel gauge.
Kickdown
Depressing the accelerator past the
point of resistance shifts the transmis-
sion down to the lowest possible gear.
This very quickly accelerates the vehi-
cle and should not be used for normal
acceleration needs.Line of fall
The direct line that an object moves
downhill when influenced by the force
of gravity alone.
Lock button
Button on the door which indicates
whether the door is locked or un-
locked. Pushing the lock button down
on an individual door from inside will
lock that door.
MCS
(M
odular C
ontrol S
ystem)
Information and operating center for
vehicle sound and communications
systems, including the radio and the ra-
dio and navigation system, as well as
for other optional equipment (CD
changer, telephone, etc.).Memory function*
Used to store three individual seat,
steering wheel and mirror positions.
MON
(M
otor O
ctane N
umber)
The Motor Octane Number for gasoline
as determined by a standardized meth-
od. It is an indication of a gasoline's
ability to resist undesired detonation
(knocking). The average of both the
MON (Motor Octane Number) and
->RON (Research Octane Number) is
posted at the pump, also known as
ANTI-KNOCK INDEX.
Multifunction display
A display field in the instrument cluster
used to present information provided
by the control system.
Parktronic system* (Parking assist)
System which uses visual and acoustic
signals to assist the driver during park-
ing maneuvers.

327 Index
I
Identification labels 292
Certification label 292
Vehicle identification number
(VIN) 292
Ignition 33
Immobilizer 83
Activating 54, 83
Deactivating 83
Indicator lamp
Adjustable steering column 253
Brake pad wear 254
Coolant 249
Front fog lamps 253
Low engine oil level 253
Indicators, additional
Speedometer display 256
Infant and child restraint systems 68
Installing 71
LATCH child seat mounts 72Information
About service and warranty 10
Button for Tele Aid* 177
Inside rear view mirror
Antiglare 126
Installing
Infant and child restraint systems 71
Wiper blades 273
Instrument cluster 24, 116, 313
Cleaning 238
Coolant temperature gauge 117
Display in the speedometer 117
Illumination 116
Lamps in 252
Outside temperature indicator 118
Instruments and controls see Cockpit 22
Integrated remote control
Erasing memory 185
Operating 185
Interior lighting 112Activating automatic control 113
Deactivating automatic control 113
Manual operation 113
Reading lamps 114
Interior storage spaces 164
Armrest 165
Cup holder 167
Glove box 164
Storage compartment in front of
armrest 165
Storage compartment under front pas-
senger seat* 164
Intermittent wiping 130
J
Jack 258
Jump starting 281

330 IndexManual seat
Adjusting 35
Adjusting backrest tilt 36
Adjusting head restraint height 36
Adjusting head restraint tilt 37, 39
Seat fore and aft adjustment 35
Seat height 36
MB Tex upholstery
Cleaning 239
MCS
Modular Control System 313
Mechanical key 261
Memory function 105, 313
Memory function* 106
Recalling positions from
memory 106
Mirror
Inside rear view mirror 40Mirrors
Activating exterior mirror parking
position 127
Adjusting 40
Automatic antiglare for rear view
mirror 126
Exterior rear view mirror 40
Storing exterior rear view mirror park-
ing position 106
MON 215
MON (Motor Octane Number) 313
Monitoring reach
Parktronic* 154
Multifunction display 313
N
Night security illumination 109
Deactivation temporarily 109
Setting time 109O
Occupant safety 58
Children and airbags 60
Children in the vehicle 67
Fastening the seat belt 42
Infant and child restraint systems 68
LATCH child seat mounts 72
Seat belts 42, 62
Odometer display 117
Odometer, main 25
Off-road driving
Checklist 201, 206
Crossing obstacles 204
Driving instructions off-road
driving 200
Driving through water 203
Returning 205
Rules 201
Special driving features 201
Steep terrain 202

332 IndexPartition net* 159
Engaging 159
Removing 161
Tightening 160
Parts see Spare parts service
Passenger compartment 211
Interior lighting 112
Passenger footwell
Fuse box in 288
Passenger safety see Occupant
safety 58
Pedals 193
Plastic and rubber parts
Cleaning 239
Poly-V-belt drive 314
Layout 293
Positions (Memory function*)
Recalling from memory 106
Storing into memory 106
Power assistance 193Power seat*
Adjusting backrest tilt 38
Adjusting head restraint height 38
Adjusting seat cushion tilt 38
Adjusting seat height 38
Seat fore and aft adjustment 37
Power seats* 37
Power train 314
Power washer 235
Power windows
Blocking of rear door window
operation 73
Side windows 144
Synchronizing 146
Practical hints
First aid kit 257
Fuses 287
Lamps in instrument cluster 242
Spare wheel 259
Towing the vehicle 283
Vehicle jack 258
Vehicle tool kit 257Premium unleaded gasoline 303
Problems
While driving 51
With vehicle 18
Product information 9
Programming or reprogramming the inte-
grated remote control 182
R
Radio transmitters, control and
operation 211
Rain sensor* 130, 131
Rapid seat heating
Switching off 99
Rapid seat heating*
Switching on 98
Reading lamp 29

336 IndexSide windows 144
Automatic closing 145
Automatic opening 145
Cleaning 237
Closing 145
Closing fully (Express-close) 145
Opening 145
Opening and closing 144
Opening fully (Express-open) 145
Rear quarter window 146
Stopping 145
Synchronizing power windows 146
Simultaneous wiping and washing
Rear window wiper/washer 51
Windshield wipers 50
Single wipe 50
Sliding/pop-up roof* 148
Closing 148, 265
Opening 148, 265
Synchronizing 149
Snow chains 231
Spare fuses 287
Spare parts service 290Spare wheel 259
Mounting 274
Removing 259
Speed
Saving current 151
Speed settings
Cruise control 152
Speedometer 25
Speedometer display
Additional indicators 256
Split rear bench seat 99
SRS 66, 314
Indicator lamp 255
Standing lamps 107
Replacing bulbs 266, 267
Standing water
Driving instructions 200
StArt
Display messages 256
Starting difficulties 47
Starting position 33
Starting the engine 46Steep terrain
Driving 202
Steering column
Height adjustment 39
Length adjustment 39
Steering lock 23, 33
Positions 33
Steering wheel
Adjusting 39
Adjustment 39
Cleaning 238
Stolen vehicle
Tracking services 180
Stop watch 189
Stopping
Windows 145
Storage compartments
Glove box 164
Under front passenger seat* 164
Storing (Memory function*)
Positions into memory 106
Stranded vehicle 286

3. Normalize side power windows. See NORMALIZING POWER WINDOWS .
4. Start engine and run at idle. Turn steering wheel from one lock position to the other to activate steering
angle sensor. Center steering wheel. Message "EI. STAB. PROGRAM GO TO GARAGE" should erase
from multifunction display panel.
5. If equipped, normalize tilting/sliding roof. See NORMALIZING TILTING/SLIDING ROOF
.
6. If equipped, normalize memory power seats, steering column and outside mirror if components are
installed. See NORMALIZING MEMORY POWER SEATS, STEERING COLUMN & OUTSIDE
MIRROR .
Normalizing Power Windows
1. Completely close each window with manual switch. Hold switch in closed position for .3 second.
2. Repeat procedure for each power window.
Normalizing Memory Power Seats, Steering Column & Outside Mirror
1. Using manual switch, move seat to each end position and hold for .3 second. Repeat procedure for each
switch except rear stop of backrest.
2. Repeat procedure for end positions of steering wheel and outside mirrors.
Normalizing Tilting/Sliding Roof
Open roof with SR switch until mechanical stop is reached. Continue to press switch for .5 seconds.
Setting Time
1. Use bottom left button on steering wheel to scroll through menus on instrument cluster to "Settings"
menu.
2. Move selection marker with + or - button to "Time" submenu.
3. Press up or down arrows to "Clock, hours" setting. Confirm selection marker is on the hour setting.
4. Press + or - to set hour. Press reset knob in instrument cluster to confirm.
5. Move selection marker with + or - button to "Time" submenu.
6. Press up or down arrows to "Clock, minutes" setting. Confirm selection marker is on the minutes setting.
7. Press + or - to set minute. Press reset knob in instrument cluster to confirm.
TESTING
If generator malfunctions, check for Diagnostic Trouble Codes (DTCs) in Motor Electronics Sequential Fuel
Injection (ME-SFI) system. See appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE. If
cause of generator malfunction is not engine performance related, replace generator.
RETRIEVING & ERASING DIAGNOSTIC TROUBLE CODES
NOTE: Before replacing any component that scan tool suggests are faulty, ensure that
all wiring connections and harness connectors are okay. Ensure that power and

2001 Mercedes-Benz ML320
2001-04 STARTING & CHARGING SYSTEMS Generators & Regulators - 163 Chassis
me
Saturday, October 02, 2010 3:20:32 PMPage 8 © 2006 Mitchell Repair Information Company, LLC.

GF72.29-P-2002GH
Convenience control, function
7.4.97

MODEL
163

The convenience control allows the driver to operate the electrical

seat adjustment, the power windows, the electric vent windows, the

electric outside rearview mirror as well as the electric sliding/pop-up

roof or the electric lamella sliding roof

when the ignition is switched

off.

To achieve this, the all-activity module (AAM) (N10) switches to the

corresponding loads via the convenience relay (F1k14)

circuit 30 .

As of 12.99 the vehicle is equipped with its own convenience relay for

seat adjustment (relay 1, F2k1). In addition the status of the

convenience control via CAN is transmitted to the extended activity

module (EAM, N10/1).

Conditions for control actuation

On all-activity module (AAM) (N10) configured for

I
up

to

11.99:

The convenience actuation becomes active as soon as

D
Circuit 15 ON is recognized

When circuit 15 is switched off, the convenience actuation is

deactivated after a door is opened
Otherwise

The convenience actuation is active in the following cases:
D
Circuit 15c ON

D
A front door is open

D
The remote control key is removed, however, the doors are not

yet opened

In both cases the convenience actuation remains active for 5 min.


Switch-on condition for circuit 15c

When the remote control key is inserted into the ignition lock, circuit

15c is switched on when the key is turned out of the zero position.

Circuit 15c switches off only after the remote control key is removed

from the ignition lock

Electric seat adjustment without memory,

function

GF91.29-P-0003GH

Electric seat adjustment with memory, function
as of 12.99

GF91.29-P-0002GH

Convenience control, function
for electrical seat adjustment as of 12.99

GF91.29-P-2013GK

Power windows, function

GF72.29-P-0003GH

Power tilting/sliding roof (SR), function

GF77.20-P-0001GH

Electrically adjustable outside rearview

mirrors, function

GF88.79-P-0005GH

Electric vent windows, function

GF67.39-P-1000GH

Extended activity module,

location/purpose/design
as of 12.99

GF54.21-P-4107GK

Copyright DaimlerChrysler AG 04.08.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1