AIR CONDITIONING AND AUDIO
127
Once the system is set, the indicator light turns on and off
with the ignition switch in ªOFFº and ªSECº will appear each
time the key is turned to the ªACCº position.
To change the identification number for some reason, cancel
the system (See ª(b) Cancelling the anti±theft system.º) and
set it again with a new number.
The system will be activated if the electrical power source is
disconnected from the radio unit. When the system is
activated, the audio system cannot be turned on even after
the power supply resumes and ªSECº will appear on the
display. If this happens, such as when the battery is
discharged, see ª(c) If the anti±theft system is activated.º(b) Cancelling the anti±theft system
1. Follow steps 1 to 4 described in ª(a) Setting the
anti±theft system.º
2. With your identification number appearing on the
display, press the
(SCAN) button and hold it in until
ª±±±º appears on the display. ª±±±º will go off to indicate the
system is cancelled. If invalid buttons have been used, ªErrº
will appear on the display and ªSECº appears. Try again
from step 3 in ª(a) Setting the anti±theft system.º
The number displayed with ªErrº indicates how many errors
you have made. You may make up to nine errors, but no
more!
