THEFT DETERRENT
96
Testing the system
1. Open all the windows.
2. Set the system as described above.
The front doors should be locked with the ignition key or
wireless door lock remote control. Be sure to wait until the
indicator light starts flashing.
3. Unlock one of the doors from the inside.
The system should activate the alarm.
4. Unlock any of the doors with a key or the wireless
door lock remote control to cancel the system.
5. Repeat this operation for the other doors and hood.
When testing the hood, also check that the system is
activated when the battery terminal is disconnected and then
reconnected.
If the system does not work properly, have it checked by your
Lexus dealer.
NOTICE
Disconnecting the battery may result in the erasure
of information you have set in the computer
memory. After reconnecting the battery, check that
the memorized data has been retained. If it has been
erased, input it into the computer once more.
THEFT PREVENTION LABELS
(U.S.A. ONLY)
Your new vehicle carries the theft prevention labels
which are approximately 56 mm (2.20 in.) by 16 mm (0.63
in.).
The purpose of these labels is to reduce the incidence of
vehicle thefts by facilitating the tracing and recovery of parts
from stolen vehicles. The label is designed so that once it is
applied to a surface, any attempt to remove it will result in
destroying the integrity of the label. Transferring these labels
intact from one part to another would be impossible.
NOTICE
You should not attempt to remove the theft
prevention labels as it may violate certain state or
federal laws.
