DRIVING TIPS
155
Brakes and safety chains
Lexus recommends trailers with brakes that conform
to any applicable federal and state/provincial
regulations.
A safety chain must always be used between the
towing vehicle and the trailer. Leave sufficient slack in
the chain for turns. The chain should cross under the
trailer tongue to prevent the tongue from dropping to
the ground in case it becomes damaged or separated.
For correct safety chain procedures, follow the hitch
or trailer manufacturer's recommendations.
CAUTION!
If the total trailer weight exceeds 450 kg (1000 lb.),
trailer brakes are required.
Never tap into your vehicle's hydraulic system as
it will lower its braking effectiveness.
Never tow a trailer without using a safety chain
securely attached to both the trailer and the
vehicle. If damage occurs to the coupling unit or
hitch ball, there is possible danger of the trailer
wandering over into another lane.
Tires
Ensure that your vehicle's tires are properly inflated.
Adjust the tire pressure to the recommended cold tire
pressure indicated below:
Tire pressure, kPa (kgf/cm
2 or bar, psi)
Front 220 (2.2, 32)
Rear 220 (2.2, 32)
The trailer tires should be inflated to the pressure
recommended by the trailer manufacturer in respect to the
total trailer weight.
Trailer lights
Trailer lights must comply with federal, state/provincial and
local regulations. See your local recreational vehicle dealer
or rental agency for the correct type of wiring and relays for
your trailer. Check for correct operation of the turn signals
and stop lights each time you hitch up. Direct splicing may
damage your vehicle's electrical system and cause a
malfunction of your lights.
Break±in schedule
Lexus recommends that you do not tow a trailer with a new
vehicle or a vehicle with any new power train component
(engine, transmission, differential, wheel bearing, etc.) for
the first 800 km (500 miles) of driving.
