AIR CONDITIONING AND AUDIO
102
SETTING OPERATION ± manual control
If manual air flow selection is desired ±
The outlets from which air is delivered can be selected
manually by pushing the button. The function of each mode
is as follows:
PANEL mode ± Air flows directly from the instrument
panel vents.
Bi±level ± Air flows from both the floor vents and the
instrument panel vents.
Floor ± Air flows mainly from the floor vents.
Floor/Windshield ± Air flows mainly from the floor vents
and windshield vents.If quick heating or cooling is desired ±
Turn the ªTEMPº knob until ªMAX. HOTº or ªMAX. COLDº
appears on the display.
When the ªMAX. COLDº is selected, the air intake is
automatically set to ªRECIRCULATED AIRº mode.
To cancel the automatic control of the ªRECIRCULATED
AIRº mode; turn the ignition switch off and then turn it on
while pushing the ªAUTOº and the fan speed control button
on the left side. To return to the previous mode of automatic
control; turn the ignition switch off and then turn it on while
pushing the ªOFFº and ªFRONT WINDSHIELDº buttons.
If manual fan speed is desired ±
Fan speed at low Fan speed at high
The fan speed can be set to your desired speed by pushing
the apprpraite side of fan speed control button. The higher
the fan speed is, the more air is delivered. Pushing the ªOFFº
button turns off the fan.
