Playing  a  Compact Disc in  the  Single  Remote  Disc 
Player 
(If Equipped) 
If you have this  option, you can  play  one  compact  disc 
(CD)  at  a  time. 
To  load  a  CD into  the  player,  hold  the  disc  with  the  label 
side  up  and  insert  it  carefully into the  player 
(approximately  halfway).  The  disc will  automatically  be 
pulled  into the  player. 
If the  radio is off  and  the  ignition 
is on  when  a  CD  is inserted,  the  radio  will  turn on and 
begin  playing  the  CD. It is  possible  to load  and  unload 
CDs  with  the  ignition 
off. To load  a  disc  with  the 
ignition 
off, press  the  EJECT button  on  the  remote 
player  and  then  insert  the  disc. 
To remove  the  disc, press 
the  EJECT  button  and  remove  the  disc from  the  player. 
A disc that  has  been  ejected  but is still  sitting in the 
remote  CD  player  will  be  pulled  back  into  the  player 
after  approximately 
30 seconds.  This  protects  the  disc and  player  from  damage.  The 
disc will  not  start  playing. 
To remove  the  disc,  press  the  EJECT  button  and  remove 
the  disc  from  the  player. 
All 
of the  compact  disc  functions  are controlled  by  the 
radio  buttons  except  for EJECT.  When  a  disc 
is in  the 
player,  a  CD symbol  will  appear 
on the display.  When  a 
disc 
is playing,  the  letters  CD will  appear  next to the CD 
symbol  in  the  bottom  left  corner.  The track  number  will 
also  be  displayed. 
If  the  disc  comes  back 
out and ERR appears  on  the 
display,  it  could  be  that: 
The disc  is  upside  down. 
0 It  is  dirty,  scratched  or  wet. 
There’s  too  much  moisture  in the  air.  (Wait  about  an 
hour  and  try  again.) 
0 You  are driving on a  very  rough  road. 
Please  contact  your  dealership  if  any error recurs  or 
cannot  be corrected. 
PREV (1): Press  this  button to go back to the start 
of the  current  track  if  more  than  eight  seconds  have 
played.  Press  PREV  again 
to go to the  previous  track 
on  the  disc. 
ProCarManuals.com 
NEXT (3): Press this button to advance to the  next track 
on  the  disc. 
REV (4): Press  and  hold this button to quickly  reverse 
within  a track.  As the CD reverses,  elapsed time will be 
displayed 
to help  you  find  the  correct passage. 
FWD (6): Press and  hold  this button to quickly advance 
within a track. As the CD advances, elapsed  time will be 
displayed  to  help  you  find the correct passage. 
SEEK: Press  the  left  arrow  while  playing  a CD  to go 
back  to  the  start of the  current track.  It  will go back  to 
the current  track 
if more  than eight seconds  have  played. 
Press  the  left arrow  again  to 
go to previous  tracks. Press 
the  right 
arrow to go  to the  next  higher  track  on  the disc. 
RANDOM: Press P.SCAN  to  enter the  random  play 
mode.  RANDOM 
will appear  on  the  display.  While  in 
this  mode,  the  tracks  on  the  discs will  be  played  in 
random  order.  If  you press SEEK,  PREV or NEXT 
while  in the  random  mode,  the  previous or  next  track 
will  be  scanned  randomly.  Press P.SCAN  again  to  turn 
off  RANDOM  and  return  to normal  operation. 
RECALL: Press this button  to see  what  track  is 
currently playing. Press  RECALL  again  within five 
seconds  to  see how  long  the track  has  been  playing. 
When  a 
new track starts to  play,  the  track  number  will  also 
appear.  Press  RECALL 
a third  time  and the  time of 
day  will  be  displayed. 
TAPE AUX: With a disc loaded  in  the  player  and  the 
radio  playing, press this  button once to  play  the  compact 
disc.  To return  to playing  the  radio, press  AM-FM. 
If 
both a cassette tape  and CD are loaded, press  TAPE 
AUX  to switch  between  the  tape and compact disc. 
E JECE Press  this  button  on  the  remote  player to eject  a 
compact  disc. If  you  leave a compact  disc in  the  player 
while  listening  to the  radio, 
it may  become  warm. 
Theft-Deterrent  Feature 
THEFTLOCK"  is  designed  to  discourage theft of your 
radio. 
It works  by using  a secret code to disable  all radio 
functions  whenever  battery  power  is  removed. 
The  THEFTLOCK  feature for the radio  may be used  or 
ignored.  If ignored,  the  system  plays  normally  and  the 
radio is  not  protected  by the feature.  If THEFTLOCK 
is 
activated,  your  radio  will  not  operate if stolen. 
When  THEFTLOCK  is activated,  the radio  will  display 
LOC  to indicate 
a locked  condition anytime  battery 
power  is removed.  If your  battery  loses power  for any 
reason,  you  must  unlock  the  radio with  the  secret code 
before  it will  operate. 
3-21 
ProCarManuals.com