1997 FORD RANGER fuel

176
[GF16190(R)05/96]
Four-wheel drive operation (4x4 HIGH or 4x4 LOW) on dry
pavement is not recommended. Operating the vehicle in
four-wheel drive on dry pavement will increase noise, vibration,
tire wear, decrease fuel economy, and make four-wheel drive
disengagement difficult for the transfer case.
[GF16200(R)05/96]
Electric shift system indicator lights
[GF16210(R)05/96]
A 4WD indicator light and a 4WD LOW indicator light are
located in the instrument cluster. If either light flashes, take
your vehicle in for service.
[GF16220(R)05/96]
n
Two-Wheel Drive mode Ð Neither the 4WD nor the 4WD
LOW lights are lit.
[GF16230(R)05/96]
n
4WD High Ð Only the 4WD light is lit.
[GF16240(R)05/96]
n
4WD LOW mode Ð Both the 4WD and 4WD LOW lights
are lit.
[GF16250(R)05/96]
To shift from Two-Wheel Drive to 4WD High:
[GF16260(R)05/96]
To shift into 4WD High rotate the 4WD switch located on the
instrument panel to 4x4 High. This shift can be done at a stop
or at speeds up to 55 miles per hour (88 km/h). When the
vehicle is driven, the automatic locking hubs will engage. If the
vehicle is stopped while in 4WD and the vehicle direction is
reversed from the previous direction, the automatic locking hubs
will momentarily disengage and re-engage. The automatic
locking hubs may click as they automatically engage in the new
direction.
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

178
*
[GF16330(R)05/96]
For example:
[GF16340(R)05/96]
If you were driving the vehicle forward in 4WD, the
automatic locking hubs will disengage the next time the
vehicle is driven in reverse in two-wheel drive for
approximately 10 feet (3 meters) in a straight line.
[GF16350(R)05/96]
If you were driving the vehicle in reverse in 4WD, the
automatic locking hubs will disengage the next time the
vehicle is driven forward in two-wheel drive for
approximately 10 feet (3 meters) in a straight line.
*
[GF16360(R)05/96]
Operating in two-wheel drive mode with the hubs locked
increases fuel consumption, noise, vibration, and wear. For
prolonged two-wheel drive operation on dry pavement,
disengagement of the automatic locking hubs, which is not
required for two-wheel drive operation, stops all movement of
front-wheel drive components while operating in two-wheel
drive.
[GF16370(R)05/96]
During axle break-in or operation in extremely cold
temperatures, the automatic locking hubs may not release
completely. It may be necessary to drive the vehicle for 10 to 15
minutes before repeating the release procedure.
[GF16380(R)05/96]
To shift from 4x4 HIGH or 2WD to 4x4 LOW:
[GF16390(R)05/96]
Stop the vehicle, depress the brake and place the automatic
transmission in N (Neutral) or depress the clutch on vehicles
with a manual transmission. Rotate the 4WD switch on the
instrument panel to 4x4 LOW. Both the 4WD and 4WD LOW
lights are now lit.
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

180
[GF17020(R)05/96]
24 pica art:0090170-A
Transfer case selections
*
[GF17030(R)05/96]
Four-wheel drive operation (4H or 4L) on dry pavement is not
recommended. Operating the vehicle in four-wheel drive on dry
pavement will increase tire wear, decrease fuel economy, and
make four-wheel drive disengagement difficult for the transfer
case.
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

182
[GF17140(R)05/96]
NOTE: Do not drive the vehicle with the left and right
manual locking hubs set to different positions.
*
[GF17150(R)05/96]
To shift from 4H to 2H:
*
[GF17160(R)05/96]
Move the transfer case shift lever forward to the 2H position.
This can be done at any speed. However, the front driveline
will remain engaged to the front wheels until the manual
locking hubs are disengaged. To disengage the manual locking
hubs, stop the vehicle and rotate both hub lock selector knobs
counterclockwise to the FREE position.
*
[GF17170(R)05/96]
Operating in 2H with the hubs in the LOCK position increases
fuel consumption, noise, vibration, and wear. For prolonged 2H
operation on dry pavement, set the manual locking hubs to the
FREE position.
*
[GF17180(R)05/96]
To shift between 4H and 4L:
[GF17190(R)05/96]
Stop the vehicle and place the automatic transmission into N
(Neutral) or depress the clutch on vehicles with a manual
transmission. Pull the transfer case shift lever to the left and
shift the transfer case to the desired 4H or 4L position. This
shift should be with one continuous motion without pausing in
the N position. Pausing in the neutral position can result in gear
clash and difficult shifting. If while shifting between 4H and 4L,
the transfer case gets stuck in the N position or is difficult to
shift into either 4H or 4L, it may be necessary to let the vehicle
roll slightly and/or turn off the engine (particularly on vehicles
equipped with automatic transmissions).
[GF17200(R)05/96]
To shift between N (Neutral) and either 4H or 4L
[GF17210(R)05/96]
To shift into N (Neutral), stop the vehicle and engage the
parking brake. Place the automatic transmission into N (Neutral)
or depress the clutch on manual transmission vehicles. From
either the 4H or 4L position, pull the transfer case shift lever to
the left and move the transfer case shift lever to the N (Neutral)
position. The N (Neutral) position should only be used for
vehicle towing.
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

Driving
193
*
[GF30001(R)01/96]
Understanding Loading/Towing Information
*
[GF30050(R)01/96]
The following terms are used to describe the ability to carry or
tow a load:
*
[GF30101(R)01/96]
n
Base Curb Weight
*
[GF30150(R)01/96]
n
Payload
*
[GF30200(R)01/96]
n
GVW (Gross Vehicle Weight)
*
[GF30250(R)01/96]
n
GVWR (Gross Vehicle Weight Rating)
*
[GF30301(R)01/96]
n
GAWR (Gross Axle Weight Rating)
*
[GF30310(R)01/96]
n
GCWR (Gross Combined Weight Rating)
*
[GF30320(R)01/96]
n
Maximum Trailer Weight Rating
*
[GF30330(R)01/96]
n
Maximum Trailer Weight
*
[GF30340(R)01/96]
n
Trailer Weight Range
*
[GF30351(R)01/96]
Base Curb Weight
*
[GF30401(R)01/96]
The Base Curb Weight is the weight of the vehicle including
fuel, coolants, lubricants, emergency tools, spare wheel and tire.
It also includes any equipment that isstandardon that model. It
does not include passengers, cargo or optional equipment
installed by factory, dealer, aftermarket supplier or customer.
*
[GF30451(R)01/96]
Payload
*
[GF30501(R)01/96]
Payload is the combined, maximum allowable weight of cargo,
occupants and optional equipment that the truck is designed to
carry. It is Gross Vehicle Weight Rating minus the base curb
weight.
*
[GF30550(R)01/96]
Gross Vehicle Weight (GVW)
*
[GF30601(R)01/96]
If you add base curb weight and the weight of a load (including
passengers, cargo and optional equipment) being carried at a
particular time, you get the Gross Vehicle Weight (GVW).
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

Driving
195
*
[GF31050(R)01/96]
Passenger car type tires when installed on light trucks and
multipurpose passenger vehicles are rated at 10% lower load
carrying capacity due to the differences in vehicle usages.
*
[GF31101(R)01/96]
The vehicle must not be loaded to both the front and rear
GAWR because the GVWR will be exceeded. The GAWR of the
front and rear axles exceeds the GVWR when added together to
allow flexibility in fore and aft loading of cargo.
*
[GF31110(R)03/96]
With the tires inflated to the specified pressure, the total weight
of your vehicle must not exceed the GVWR and GAWR
specified on the Safety Compliance Certification Label. This
includes full fuel tank(s), vehicle equipment, and occupants as
well as the cargo load.
*
[GF31120(R)01/96]
GCWR (Gross Combined Weight Rating)
*
[GF31130(R)01/96]
GCWR is the maximum combined weight of the towing
vehicle (including passengers and cargo) and the loaded trailer.
The GCWR is specified by the manufacturer to indicate the
combined maximum loaded weight that the vehicle is designed
to tow.
*
[GF31140(R)01/96]
Maximum Trailer Weight Rating
*
[GF31150(R)01/96]
The maximum trailer weight rating is the maximum weight of a
trailer the vehicle is permitted to tow. It is specified by the
manufacturer and is determined by subtracting the vehicle curb
weight for each engine/transmission combination, any required
option weight for trailer towing and the weight of the driver
from the GCWR for the towing vehicle.
*
[GF31160(R)01/96]
Maximum Trailer Weight
*
[GF31170(R)01/96]
The maximum trailer weight is the maximum weight of a trailer
the loaded vehicle is permitted to tow. It is determined by
subtracting the weight of the loaded towing vehicle (including
passengers and cargo) from the GCWR for the towing vehicle.
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

218
*
[ER00300(R)01/96]
The Fuel Pump Shut-off Switch
*
[ER00400(R)05/96]
If the engine cranks but does not start or if you have had a
collision, the fuel pump shut-off switch may have been
triggered. The shut-off switch is a device that stops the fuel
pump when your vehicle has been involved in a substantial jolt.
*
[ER00500(R)05/96]
For information on how to check and reset the fuel pump
shut-off switch, seeFuel pump shut-off switchin the Index.
%*
[ER00700(R)01/96]
Fuses
[ER00800(R)01/96]
Fuses protect your vehicle's electrical system from overloading.
If electrical parts in your vehicle are not working, the system
may have been overloaded and blown a fuse. Before you
replace or repair any electrical parts, check the appropriate
fuses.
[ER00900(R)01/96]
The following charts tell you which fuses protect each electrical
part of your vehicle. If a fuse blows, all the parts of your
vehicle that use that circuit will not work.
*
[ER01000(R)01/96]
Once you have determined which fuses to check, follow the
procedures underChecking and replacing fuseslater in this
chapter.
File:10unerr.ex
Update:Thu Mar 20 08:56:46 1997

250
%*
[MC01400(R)05/96]
NOTE: Always dispose of used automotive fluids in a
responsible manner. Follow your community's
standards for disposing of these types of fluids. Call
your local recycling center to find out about recycling
automotive fluids.
%*
[MC01600(R)01/96]
Precautions When Servicing Your Vehicle
*
[MC01700(R)01/96]
Be especially careful when inspecting or servicing your vehicle.
Here are some general precautions for your safety:
*
[MC01900(R)01/96]
n
If you must work with the engine running, avoid wearing
loose clothing or jewelry that could get caught in moving
parts. Take appropriate precautions with long hair.
*
[MC02000(R)01/96]
n
Do not work on a vehicle in an enclosed space with the
engine running, unless you are sure you have enough
ventilation.
*
[MC02100(R)01/96]
n
Never get under a vehicle while it is supported only by a
jack. If you must work under a vehicle, use safety stands.
*
[MC02200(R)01/96]
n
Keep all lit cigarettes and other smoking materials away
from the battery and all fuel-related parts.
*
[MC02500(R)01/96]
If you disconnect the battery, the engine must ªrelearnº its idle
conditions before your vehicle will drive properly. To find out
how the engine does this, seeBatteryin this chapter.
*
[MC02600(R)01/96]
Working with the engine off:
*
[MC02660(R)01/96]1.
Set the parking brake fully and make sure that the gearshift
is securely latched in P (Park).
*
[MC02700(R)01/96]2.
Remove the key from the ignition after you turn the engine
off.
*
[MC02725(R)01/96]3.
Block the wheels. This will prevent your vehicle from
moving unexpectedly.
File:11unmcr.ex
Update:Thu Mar 20 08:58:43 1997