1997 FORD F250 height

113 [SS15500(F )01/96]
While you are fastened in the seat belt, the
combination lap and shoulder belt adjusts to
your movement. However, if you brake hard,
turn hard, or if your vehicle receives an impact
of 5 mph (8 km/h) or more, the lap and
shoulder belt will become locked and help
reduce your forward movement.
[SS15510(F )05/96]
Shoulder Belt Height Adjustment
(If equipped)
*
[SS15520(F )05/96]
Driver and right front passenger
[SS15530(F )05/96]
The driver and right front passenger shoulder
belt height is adjustable to one of five (5)
positions.
*
[SS15540(F )05/96]
To adjust the belt down, push the release button
on the adjuster down and slide the adjuster
down. Then release the button and make sure
the adjuster is firmly in one of the positions. To
adjust the belt up, slide the adjuster up. (You do
not have to push the release button.) Slide it up
or down until the belt rests across the middle of
your shoulder.
*
[SS15550(F )05/96]
RWARNING
Position the shoulder belt height adjuster
so that the belt rests across the middle of
your shoulder. Be sure the shoulder belt is
properly positioned on your shoulder each
time you use the belt. If the shoulder belt
is off your shoulder, on your upper arm
or neck, there is a greater risk of severe
injury in a collision.
*
[SS15560(F )05/96]
NOTE: Be sure the belt is properly positioned
on your shoulder each time you use
the belt.
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

114 [SS15570(F )05/96]
half page art:0021600-AShoulder belt height adjuster Ð full up position
%*
[SS16800(F )12/95]
Lap Belts
[SS16900(F )05/96]
The lap belts for center seating position
occupants do not have retractors, but do have a
locking adjustable tongue. They should be
shortened and fastened to buckle when you are
not using them. To lengthen your belt, tip the
belt tongue at a right angle to the belt and pull
the belt over your lap until the tongue reaches
the buckle.
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

148
*
[GF03150(F )03/96]
RWARNING
Modifications to the suspension spring
rates and/or vehicle ride height may
adversely affect vehicle stopping ability.
*
[GF03200(F )03/96]
If Brakes Pull
*
[GF03250(F )03/96]
q
Check tire pressure.
*
[GF03300(F )03/96]
q
Perform the self-adjustment procedure
described underIf Brakes Do Not Grip Well or
Pedal is ªLow.º
*
[GF03350(F )03/96]
If pull occurs during the first 500 miles
(800 km), make 10 moderately fast stops from
40 mph (65 km/h) and then perform the
self-adjustment procedure above. It may be
necessary to repeat this operation to properly
seat new brake linings and pads.
%*
[GF03400(FM)01/96]
Stopping Distances
*
[GF03450(FM)01/96]
Stopping distances vary with different loads and
driving conditions. Use caution when
encountering new conditions and acquaint
yourself with vehicle performance. Take full
advantage of engine braking power when
slowing down.
%*
[GF03500(FM)01/96]
Applying the Brakes
*
[GF03550(FM)01/96]
Apply the brake pedal gradually. Use the
ªsqueezeº technique Ð push on the brake pedal
with a steadily increasing force. This allows the
wheels to continue to roll while you are slowing
down, which lets you steer properly.
*
[GF03600(FM)01/96]
Do not drive with your foot resting on the brake
pedal. This will increase your vehicle's stopping
distance and may also cause brake damage.
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

260 %
*
[MC03100(F )02/96]
Opening the Hood
*
[MC03200(F )01/96]
1. Pull the hood release handle, located next to
the parking brake pedal.
*
[MC03400(F )01/96]
2. While applying downward pressure on the
hood, push the hood latch handle located
behind the grille near the center front of the
vehicle to the left.
[MC03600(F )04/96]
3. As you open the hood to its fullest extent, a
clock spring will assist you and ªsnapº into
position. The clock spring lift secures the
hood at its fullest height.
[MC03700(F )04/96]
one third page art:0020333-A
Hood release handle
File:11ltmcf.ex
Update:Tue May 28 08:52:04 1996
ProCarManuals.com