1997 FORD F250 lock

90
*
[CF65800(F )01/96]
Locking the doors with the remote entry
system
*
[CF66000(F )04/96]
To lock all the doors, press the LOCK control.
[CF66100(F )04/96]
If you would like a signal that the doors are
being locked, press the LOCK button again
within five seconds. The door will lock again,
the horn will beep, and the external lamps will
flash.
%*
[CF66200(F )01/96]
Remote entry personal alarm
*
[CF66300(F )01/96]
If you wish to activate the remote entry system
personal alarm, press the PANIC button. This
will honk the horn and flash the lights for
approximately 2 minutes 45 seconds. You can
turn it OFF by pressing the PANIC button again
from the same transmitter or by turning the
ignition to the ON or ACCESSORY position.
*
[CF66400(F )01/96]
When you use the remote entry UNLOCK or
PANIC buttons, the illuminated entry system
turns on the vehicle's interior lights for 25
seconds. You can turn these lights off with the
remote entry LOCK button or by turning the
ignition to the ON or ACCESSORY position.
*
[CF66500(F )01/96]
quarter page art:0060566-B
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com

92
*
[CF67400(F )01/96]
quarter page art:0020790-A
Replacing the batteries
%*
[CF67500(F )01/96]
Replacing lost transmitters
*
[CF67600(F )01/96]
In the event a transmitter is lost, you should
take all your vehicle's transmitters to your
dealer to have the remote entry system
deprogrammed for the lost transmitter. This is
necessary to prevent further unauthorized use of
the lost transmitter.
*
[CF67700(F )01/96]
You can also purchase additional transmitters
(up to 4 transmitters can be used) from your
dealer. You will need to take all your
transmitters to the dealer so they can program
them to the remote entry system all at the same
time.
%*
[CF68000(F )01/96]
Illuminated Entry System (If equipped)
[CF68100(F )01/96]
This system will provide illumination of the
vehicle's interior courtesy lamps when either
outside front door handle is pulled or when the
Remote Entry System is used to unlock the door
or sound the Personal Alarm. The system will
automatically turn off after approximately 25
seconds or when the ignition is turned to the
START or ACCESSORY position.
[CF68200(F )04/96]
NOTE: The inside lights will not turn off if
you have turned them on with the
dimmer knob or if any door is open.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com

95
Seating and Safety
Restraints
%*
[SS00200(F )05/96]
Seats
%*
[SS00300(F )01/96]
Adjusting the Front Seat Manually
*
[SS00400(F )01/96]
To move the front seat forward or rearward:
[SS00450(F )05/96]
1. Find the adjustment lever at the lower left
corner of the front seat.
[SS00500(F )04/96]
2. Push the lever to the left to unlatch the seat.
*
[SS00700(F )01/96]
3. Move the seat to the desired position.
*
[SS00800(F )01/96]
4. Release the lever to latch the seat in its new
position. Make sure the seat locks securely in
place.
[SS00900(F )04/96]
one third page art:0020218-B
Adjusting bucket seat
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

97 % [SS01500(F )04/96]
Reclining Bucket Seats
[SS01600(F )04/96]
You can tilt the seat back of your bucket seats
backward.
[SS01700(F )04/96]
1. On the outboard side of the seat, lift the
recliner handle up and hold it in place.
[SS01900(F )04/96]
2. Lean against the back of the seat and adjust
it to the position you want.
[SS02000(F )04/96]
3. Release the handle to lock the seat back in
place.
[SS02100(F )04/96]
4. To return the seat back upright, lift the
handle and lean forward.
[SS02200(F )04/96]
one third page art:0020222-B
Reclining bucket seat
[SS02400(F )04/96]
Lifting the seat-back adjustment lever of an
unoccupied seat will allow the seat back to fold
forward for access to the rear. Pushing the seat
back backward with the handle released returns
the seat upright.
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

99 [SS03000(F )04/96]
The center seatback console
[SS03100(F )04/96]
Your center seatback will fold down into an
armrest/console. The console includes two
cupholders, a removable coin holder and storage
space for cassette/CD's.
[SS03200(F )04/96]
half page art:0021083-A
The console on the 40/20/40 seat
% [SS03300(F )04/96]
Seat Back Release (Bench Seat)
[SS03400(F )04/96]
The front seat back for the Regular Cab and the
rear seat back for the Crew Cab can be folded
forward to gain access to the storage space
behind. Lift the seat back latch at its lower rear
corner. The seat back will lock automatically
when returned to the full upright position.
[SS03500(F )04/96]
The SuperCab split back bench seat can be
folded forward on either side to gain access to
the rear of the vehicle. To do so, push up the
latch button located at the top of the seat back.
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

102 [SS07640(F )04/96]
one third page art:0020234-CUsing the rear bench seat (SuperCab only)
[SS07650(F )04/96]
To return seat to normal seating position:
[SS07660(F )04/96]
1. Lift the seat back until it locks in the vertical
position.
[SS07670(F )04/96]
2. Check to see if the seat back is securely
latched by pulling forward on the top of the
seat back.
[SS07680(F )04/96]
3. Grasp the seat bottom and pivot rearward
(180 degrees).
[SS07690(F )04/96]
4. Check to see if the seat bottom is securely
latched by pulling up on the rear portion of
the seat bottom.
[SS07920(F )04/96]
Tilt Slide Seat
[SS07930(F )04/96]
With the seatback tilted forward, the tilt slide
seat can be moved forward to provide additional
entry space to access the rear seat compartment
of the vehicle.
*
[SS07940(F )01/96]
To operate the tilt slide seat:
[SS07950(F )04/96]
1. Lift the seatback release lever on the
outboard side of the seat cushion to unlock
the slide mechanism and the seatback.
*
[SS07960(F )01/96]
2. Push the seat assembly forward to provide
entry space to the rear seat compartment of
the vehicle.
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

103
*
[SS07970(F )02/96]
RWARNING
Check to see that the seat and seatback
are latched securely in position. Keep
floor area free of objects that would
prevent proper seat engagement. Never
attempt to adjust the seat while the
vehicle is in motion.
[SS07980(F )04/96]
Relocking the seat after a tilt slide operation:
[SS08000(F )04/96]
3. Push the seat backrest to its upright latched
position. Continue to push the seat rearward
to return it to its latched position. (This can
be done from inside the rear seat
compartment or from outside the vehicle.)
*
[SS08010(F )01/96]
NOTE: The seat can no longer be moved
rearward when in its latched position.
[SS08020(F )04/96]
one third page art:0021018-B*
[SS08030(F )01/96]
Prior to operating the vehicle, check to ensure
that the seat assembly is locked by pushing or
pulling the seat forward or rearward. If seat
does not lock, repeat steps 2 and 3.
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com

104 [SS08040(F )04/96]
one third page art:0021019-B
*
[SS08050(F )01/96]
To operate the seat adjuster:
[SS08060(F )04/96]
4. To adjust the seats forward or rearward,
locate the release lever at the right lower
front area of the seat cushion. Move the
release lever to the right and hold until the
desired seat position is obtained, then release
the lever to relock the seat.
[SS08070(F )04/96]
one third page art:0021020-BFile:06ltssf.ex
Update:Tue May 28 08:44:33 1996
ProCarManuals.com