1997 FORD CONTOUR maintenance

Driving
145
[GF17000(ALL)12/95]
When you tow in steep hills, move the automatic transaxle to 1
(First) when descending. This will give more engine braking on
downgrades. The automatic transaxle will automatically
downshift to the proper gear on upgrades.
%*
[GF17100(ALL)01/96]
If you use the speed control while you are towing on very long,
steep grades, the speed control may shut off.
*
[GF17200(ALL)12/95]
Servicing Your Vehicle If You Tow
*
[GF17300(ALL)03/96]
If you tow a trailer for a long distance, your vehicle will need
to be serviced more frequently than usual. Refer to the
Maintenance Schedulebooklet for additional information.
%*
[GF17400(ALL)01/96]
Driving Under Special Conditions
%*
[GF17500(ALL)01/96]
Tips for Safe Driving
*
[GF17600(ALL)01/96]
As with any new vehicle, yours may drive and handle
differently from your previous vehicle. Use care until you
become accustomed to its various features and driving
characteristics.
*
[GF17700(ALL)01/96]
Operate your vehicle within reasonable limits. Sudden
acceleration, deceleration, turning, or combinations of these
maneuvers can cause a vehicle to behave differently than
anticipated.
%*
[GF17800(ALL)01/96]
Driving in Bad Weather
%*
[GF17900(ALL)01/96]
Slippery roads
*
[GF18000(ALL)12/95]
On some slippery road surfaces, front-wheel drive may provide
better acceleration than rear-wheel drive. However, this does not
mean that your vehicle can stop any faster or any better than a
vehicle with rear-wheel drive. Exercise the same caution while
driving on slippery roads with your front-wheel drive vehicle as
you would with a rear-wheel drive vehicle.
File:09cdgfo.ex
Update:Thu Sep 12 11:04:39 1996

Roadside Emergencies
173
*
[ER12500(ALL)02/96]
Jump-Starting
*
[ER12600(ALL)02/96]1.
Make sure that the jumper cables are not in the way of
moving engine parts, then start the booster vehicle. Run the
engine at a moderate speed.
*
[ER12700(ALL)02/96]2.
Let the discharged battery charge for a few minutes and then
start the disabled vehicle. It may take a couple of tries before
the vehicle starts. If the vehicle does not start after several
attempts, there may be a different problem.
*
[ER12800(ALL)02/96]3.
When both vehicles are running, let them idle for a few
minutes to charge the discharged battery.
%*
[ER12900(ALL)02/96]
Removing jumper cables
*
[ER13000(ALL)02/96]1.
Always remove the jumper cables in the reverse order.
Remove the negative (s) end of the jumper cable from the
metallic surface on the engine or frame of the disabled
vehicle.
*
[ER13100(ALL)03/96]2.
Remove the negative (s) cable from the booster battery.
*
[ER13200(ALL)02/96]3.
Remove the positive (+) cable from the booster battery.
*
[ER13300(ALL)02/96]4.
Remove the other end of the positive (+) cable from the
discharged battery.
*
[ER13400(ALL)02/96]
After the vehicle is started, let it idle for a while to let the
engine ªrelearnº its idle conditions. Drive it around for a while
with all electrical accessories turned off to let the battery
recharge. Driveability may be deteriorated slightly until all drive
modes are ªrelearned.ºYou may need to use a battery charger
to fully recharge the battery.
*
[ER13500(ALL)03/96]
If you need to replace your battery, seeBatteryin the
Maintenance and Carechapter.
File:10cdero.ex
Update:Thu Sep 12 11:06:09 1996

177
Maintenance and Care
%*
[MC00200(ALL)01/96]
Service Made Easy
*
[MC00300(ALL)01/96]
Ford has two goals for servicing your vehicle.
*
[MC00400(ALL)01/96]1.
When we can, we design parts that do not need to be
serviced.
*
[MC00500(ALL)01/96]2.
We want to make servicing your vehicle as easy as possible.
To help you:
*
[MC00600(ALL)01/96]
n
We highlight do-it-yourself items in yellow in the engine
compartment so that you can find them easily.
*
[MC00700(ALL)03/96]
n
When possible, we design parts that can be replaced without
tools.
*
[MC00800(ALL)02/96]
n
We give you a Maintenance Schedule that makes tracking
routine service for your vehicle easy. The maintenance
schedule is located in theMaintenance Schedulebooklet.
*
[MC00900(ALL)01/96]
This chapter tells you about the basic parts that you need to
check and service regularly.
*
[MC01000(ALL)01/96]
If your vehicle needs professional servicing, your dealership can
provide the parts and service required. Check yourWarranty
Information Bookletto find out which parts and services are
covered. Also see theCustomer Assistancechapter of this Owner
Guide.
*
[MC01100(ALL)02/96]
Ford Motor Company recommends that the Owner Maintenance
Checks listed in theMaintenance Schedulebooklet be performed
for the proper operation of your vehicle. In addition to the
conditions listed in theOwner Maintenance Checklist, be alert for
any unusual noise, vibration, or other indication that your
vehicle may need service. If you do notice something unusual,
see that your vehicle is serviced promptly.
*
[MC01200(ALL)01/96]
Use only recommended fuels, lubricants, fluids, and service
parts conforming to Ford specifications. Motorcraft parts are
designed and built to provide the best performance in your
vehicle. Using these parts for replacement is your assurance that
Ford-built quality stays in your vehicle.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

Maintenance and Care
179
*
[MC02200(ALL)01/96]
Working with the engine off:
[MC02300(ALL)12/95]1.
Set the parking brake fully and make sure that the gearshift
is securely latched in P (Park) (automatic transaxle) or 1
(First) gear (manual transaxle).
*
[MC02400(ALL)01/96]2.
Remove the key from the ignition after you turn the engine
off.
*
[MC02500(ALL)01/96]3.
Block the wheels. This will prevent your vehicle from
moving unexpectedly.
*
[MC02600(ALL)01/96]
Working with the engine on:
*
[MC02700(ALL)01/96]1.
Set the parking brake fully and make sure the gearshift is
securely latched in P (Park) (automatic transaxle) or Neutral
(manual transaxle).
*
[MC02800(ALL)01/96]2.
Block the wheels. This will prevent your vehicle from
moving unexpectedly.
*
[MC02900(ALL)01/96]
RWARNING
Do not start your engine with the air cleaner removed
and do not remove it while the engine is running.
*
[MC03000(ALL)12/95]
If the battery is disconnected, the computer must relearn its idle
control. SeeBatteryin the Index.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

Maintenance and Care
181
[MC03700(ALL)12/95]3.
Lift the hood and secure it in the open position with the
prop rod. Make sure only the hole in the hood marked in
yellow is used.
[MC03800(ALL)12/95]
When you close the hood, make sure the prop rod is in its
retainer and that the hood latches securely.
*
[MC03900(ALL)12/95]
NOTE: Apply lubricant to the hood latch at six-month
intervals to maintain smooth and trouble-free
operation.
*
[MC04000(ALL)01/96]
NOTE: Read and understandPrecautions When Servicing Your
Vehicleat the beginning of this chapter before
opening the hood.
%*
[MC04100(ALL)03/96]
Engine Compartment
[MC04200(ALL)12/95]
Your vehicle has a 4-cylinder 2.0L EFI or 6-cylinder 2.5L EFI
engine.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

Maintenance and Care
183
[MC04400(ALL)12/95]
33-1/2 pica
art:0001163-D
The 2.5L EFI engine
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

184
%*
[MC04500(ALL)01/96]
Engine Oil Recommendations
*
[MC04600(ALL)01/96]
We recommend using Motorcraft oil or an equivalent oil
meeting Ford Specification WSS-M2C153-F and displaying the
American Petroleum Institute CERTIFICATION MARK on the
front of the container.
*
[MC04700(ALL)01/96]
10-1/2 pica
art:0001314-A
The API Certification Mark
*
[MC04800(ALL)01/96]
Neveruse:
*
[MC04900(ALL)01/96]
n
ªNon-Detergentº oils
*
[MC05000(ALL)02/96]
n
Oils labeled API SA, SB, SC, SD, SE, SF or SG
%*
[MC05100(ALL)01/96
]
n
Additional engine oil additives, oil treatments or engine
treatments
%*
[MC05200(ALL)03/96
]
Engine oils with anSAE 5W-30viscosity arePREFERREDfor
your vehicle. They provide the best engine performance, fuel
economy and engine protection for all climates down to-15ÊF
(-25ÊC).
%*
[MC05300(ALL)03/96
]
Synthetic engine oils which are CERTIFIED and of the preferred
viscosity may be used in your engine. The engine oil and oil
filter must still be changed according to the maintenance
schedule.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

Maintenance and Care
185
%*
[MC05400(ALL)01/96
]
Checking and Adding Engine Oil
*
[MC05500(ALL)01/96]
Since the proper amount of engine oil is important for safe
engine operation, check the oil using the dipstick each time you
put fuel in your vehicle. Remember the engine must be off, the
oil must be warm and the vehicle must be parked on level
ground.
%*
[MC05600(ALL)01/96
]
Checking the engine oil level:
*
[MC05700(ALL)01/96]1.
Turn the engine off after it has warmed up and allow a few
minutes for the engine oil to drain back into the oil pan.
*
[MC05800(ALL)01/96]2.
Set the parking brake fully and make sure that the gearshift
is securely latched in P (Park) (automatic transaxle) or 1
(First) (manual transaxle).
*
[MC05900(ALL)01/96]3.
Open the hood. Protect yourself from engine heat.
*
[MC06000(ALL)01/96]4.
Locate the engine oil dipstick (highlighted in yellow) and
carefully pull it out of the engine.
*
[MC06100(ALL)01/96]5.
Wipe the dipstick clean and put it back into position, making
sure it is fully seated.
[MC06200(ALL)12/95]
6 pica art:0001305-A
Engine oil dipstick (2.0L engine)
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996