1997 FORD CONTOUR wipers

60
*
[CF12800(ALL)08/95]
High Beams and Flashing the Lamps
[CF12900(ALL)12/95]
To turn on the high beams, turn the headlamp control knob to
the headlamp ON position and push the turn signal lever away
from you until it latches. When the high beams are on, the high
beam indicator light on the instrument cluster comes on.
[CF13000(ALL)12/95]
To turn off the high beams, pull the lever back to the off
position.
*
[CF13100(ALL)01/96]
To flash the headlamps, pull the lever toward you for a moment
and then release it. The headlamps will flash whether the
headlamp knob is in the on or off position.
%*
[CF13200(ALL)01/96]
Windshield Wipers and Washer
[CF13300(ALL)04/96]
To turn on the windshield wipers, the ignition key must be
turned to the ON position.
[CF13400(ALL)12/95]
10-1/2 pica
art:0001189-D
Using the windshield wiper
[CF13500(ALL)12/95]
The windshield wipers can be set on high, low speed or interval
wipe. Turn the ring on the lever to set a longer or shorter pause
between wiping cycles.
File:05cdcfo.ex
Update:Fri Sep 13 08:48:17 1996

Controls and Features
61
*
[CF13600(ALL)01/96]
Windshield Washer
[CF13700(ALL)12/95]
When the lever is pulled to activate the windshield washer, the
wipers operate for about three cycles after the spray stops.
[CF13800(ALL)12/95]
7-1/2 pica art:0001194-D
Washing the windshield
*
[CF13900(ALL)08/95]
Do not try to clean the windshield when the washer fluid
container is empty or activate the washers at any time for more
than 15 seconds continuously. This could damage the washer
pump system.
*
[CF14000(ALL)01/96]
RWARNING
Always warm up the windshield with the defroster
before you use the washer fluid. In freezing weather, the
washer solution may freeze on the windshield and
obscure your vision.
*
[CF14100(ALL)03/96]
For information about refilling the washer fluid or replacing
your windshield wiper blades, seeWindshield washer fluid and
Wipersin the Index.
File:05cdcfo.ex
Update:Fri Sep 13 08:48:17 1996

Maintenance and Care
203
*
[MC17600(ALL)01/96]
To make reaching the wiper blades easy, simply turn the
ignition to the ACC position and turn your wipers on. Wait for
them to reach a vertical position and turn the ignition to the
OFF position. Do not move the wipers manually. Manually
moving the wipers across the windshield may damage them.
*
[MC17700(ALL)02/96]
Wiper blade replacement
*
[MC17800(ALL)01/96]
If the wiper blades still do not work properly after you clean
them, you may need to replace the wiper blade assembly or the
blade element. When replacing the wiper blade assembly, blade
refill, or wiper arm always use a Motorcraft part or equivalent.
To replace the blades, follow the instructions that come with
them.
%*
[MC17900(ALL)01/96]
Tires
%*
[MC17901(O )03/96]
Checking Tire Pressure
*
[MC18100(ALL)02/96]
n
Use an accurate tire pressure gauge.
*
[MC18200(ALL)02/96]
n
Check the tire pressure when tires are cold, after the vehicle
has been parked for at least one hour or has been driven less
than 3 miles (5 km).
*
[MC18400(ALL)03/96]
n
Adjust tire pressure to recommended specifications found on
the Safety Compliance Certification Label.
*
[MC18900(ALL)01/96]
RWARNING
Improperly inflated tires can affect vehicle handling and
can fail suddenly, possibly resulting in loss of vehicle
control.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

281
Index
Hood......................... 180
latch location.................... 180
lubrication specifications............... 231
release lever.................... 180
working under the hood............... 178
Horn.......................... 62
I
Identification Number, Vehicle (VIN).......... 239
Idle
relearning..................... 173
speed....................... 121
Ignition
chime........................ 58
positions of the ignition................ 56
removing the key................... 57
Infant seats (see Safety seats)............100, 102
Instrument panel.................... 7
lighting up panel and interior............. 54
Interval wipers..................... 60
J
Jack......................... 162
operation....................163±164
positioning...................163±164
storage....................... 162
Jump-starting your vehicle
attaching cables................... 171
disconnecting cables................. 173
K
Keys
key in ignition chime................. 58
positions of the ignition................ 56
removing from the ignition.............. 57
stuck in lock position................. 56
File:cdixo.ex
Update:Thu Sep 12 11:12:35 1996

289
Index
Transaxle
automatic operation................. 130
fluid, checking and adding (automatic)........ 195
fluid, refill capacities................ 230
lubricant specifications................ 231
Transaxle control switch................ 133
Transmitter (see Remote entry).............. 79
Trip odometer...................... 21
Trunk, using the remote entry system to open....... 80
Tune-up specifications (VECI).............. 218
Turn signal....................... 59
indicator lights.................... 19
lever......................... 59
U
Used engine oil, disposal................ 178
V
Variable interval wipers................. 60
VECI (Vehicle Emission Control Information) decal.... 218
Vehicle Identification Number (VIN)........... 239
Vehicle loading
automatic transaxles................. 140
calculating the load................. 140
manual transaxles.................. 140
understanding loading information.......... 139
Vehicle storage.................... 232
Ventilating your vehicle (see Climate control)....... 47
Viscosity (see Engine oil)................ 184
Visor (see Sun visor)................... 70
File:cdixo.ex
Update:Thu Sep 12 11:12:35 1996

291
Index
Windshield washer fluid and wipers........... 60
checking and adding fluid.............. 189
checking and replacing wiper blades......... 202
operation....................... 60
reservoir...................... 189
specifications.................... 231
variable interval wipers................ 60
Windshield wipers and washer.............. 60
Wrecker towing.................... 174
File:cdixo.ex
Update:Thu Sep 12 11:12:35 1996