1997 FORD AEROSTAR ad blue

62 % [CF00160(ALL)04/96]Air Conditioner and Heater (If equipped)
[CF00170(ALL)01/96]
The control for your air conditioner and heater
system is located near the center of the
instrument panel and operates only when the
ignition key is turned to the ON position. Your
air conditioner and heater heats or cools your
vehicle interior depending on the function and
the temperature you select. The right knob is the
SELECT knob which allows you to select heating
or cooling and determine where the air will be
directed. The TEMP knob setting determines the
temperature of the air that flows into the
vehicle.
[CF00180(ALL)01/96]
one third page art:0095031-A
Climate control knobs
[CF00190(ALL)01/96]
To turn your air conditioner and heater system
on, rotate the SELECT knob to any position
except OFF. This will turn the fan on and allows
airflow into the vehicle.
*
[CF00200(ALL)03/96]
Temperature selection
[CF00210(ALL)01/96]
The TEMP knob is the rotating knob located at
the center of the control with tapered red and
blue bands surrounding most of the knob. The
wide red part of the band (full right) is the heat
area. The wide blue area (full left) is the cooling
temperature area. Any position selected between
full right and full left will give a temperature
between the two extremes except in MAX A/C.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

66 [CF00420(ALL)01/96]To turn the heater system on, rotate the SELECT
knob to any position except OFF. This turns on
the fan and allows airflow into the vehicle.
*
[CF00430(ALL)03/96]
Temperature selection
[CF00440(ALL)01/96]
The TEMP knob is the rotating knob located at
the center of the control with tapered red and
blue bands surrounding most of the knob. The
wide red part of the band (full right) is the heat
area. The wide blue area (full left) is the cool
area. Any position selected between full right
and full left will give a temperature between the
two extremes. The cool temperature you select
will not be cooler than the outside temperature.
[CF00450(ALL)04/96]
Fan speed adjustment
[CF00460(ALL)01/96]
The left knob or upper left knob with thexis
the fan speed knob. Rotate thexknob to the
right to increase fan speed and increase the
amount of air entering the vehicle. Four fan
speed positions are available.
*
[CF00470(ALL)01/96]
Function selection
[CF00480(ALL)01/96]
Use VENT to bring outside air through the
instrument panel registers. You can heat the air
in this position by rotating the TEMP knob into
the red area. The air cannot be cooled below the
outside temperature regardless of the TEMP
knob setting.
[CF00490(ALL)01/96]
Airflow will be to the floor when FLR is
selected. The air can be heated by rotating the
temperature knob into the red area.
[CF00500(ALL)04/96]
Select MIX to get air to the floor and windshield
defrosters at the same time.
[CF00510(ALL)01/96]
SelectVto obtain maximum airflow to the
windshield. Rotate the TEMP knob into the red
area for the air temperature required to defrost.
Rotate thexknob to increase or decrease the
airflow.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996