Page 215 of 347
215 [ER07000(ALL)01/96]
2. Position the flat tire, valve stem up, under
the rear-most seat and over the ªJº bolt
attaching bracket on the floor pan.
[ER07100(ALL)01/96]
3. Insert the ªJº hook bolt through the center of
the wheel and hook on bracket.
[ER07200(ALL)01/96]
4. Install plate over ªJº hook bolt and secure
with wing nut.
[ER07300(ALL)01/96]
quarter page art:0020267-A
A Stowed position of ªJº bolt, plate and wing nut
(Standard length model)
[ER07400(ALL)01/96]
one third page art:0020268-A
Flat tire stowage (Standard length model)
File:10cpera.ex
Update:Thu Jun 6 14:45:00 1996
Page 217 of 347
217
*
[ER15420(ALL)03/96]
When one of the back wheels is off the ground,
the transmission alone will not prevent the
vehicle from moving or slipping off the jack,
even if the vehicle is in P (Park). To prevent the
vehicle from moving when you change a tire, be
sure the parking brake is set, then block the
wheel (both directions) that is diagonally
opposite (other side and end of the vehicle) to
the tire being changed.
*
[ER15430(ALL)03/96]
RWARNING
If the vehicle slips off the jack, you or
someone else could be seriously injured.
*
[ER15550(ALL)01/96]
2. Get out the spare tire and jack.
[ER15600(ALL)01/96]
The jack, jack handle and lug nut wrench are
stowed separately on the left hand wheelhouse
inner panel on standard length models. And in
the right rear storage compartment on extended
length models.
[ER15700(ALL)01/96]
one third page art:0020285-A
Jack stowage
File:10cpera.ex
Update:Thu Jun 6 14:45:00 1996
Page 308 of 347
![FORD AEROSTAR 1997 1.G Owners Manual 311 %
*
[HS08440(ALL)05/96]
Mediation/Arbitration Program
(Canada Only)
*
[HS08450(ALL)05/96]
In those cases where you continue to feel that
the efforts by Ford and the dealer to resolve a
factory-rel FORD AEROSTAR 1997 1.G Owners Manual 311 %
*
[HS08440(ALL)05/96]
Mediation/Arbitration Program
(Canada Only)
*
[HS08450(ALL)05/96]
In those cases where you continue to feel that
the efforts by Ford and the dealer to resolve a
factory-rel](/manual-img/11/4752/w960_4752-307.png)
311 %
*
[HS08440(ALL)05/96]
Mediation/Arbitration Program
(Canada Only)
*
[HS08450(ALL)05/96]
In those cases where you continue to feel that
the efforts by Ford and the dealer to resolve a
factory-related vehicle service concern have been
unsatisfactory, Ford of Canada participates in an
impartial third party mediation/arbitration
program administered by the Canadian Motor
Vehicle Arbitration Plan (CAMVAP).
*
[HS08460(ALL)05/96]
The CAMVAP program is a straight-forward and
relatively speedy alternative to resolve a
disagreement when all other efforts to produce a
settlement have failed. This procedure is without
cost to you and is designed to eliminate the
need for lengthy and expensive legal
proceedings.
*
[HS08470(ALL)05/96]
In the CAMVAP program, impartial third-party
Arbitrators conduct hearings at mutually
convenient times and places in an informal
environment. These impartial Arbitrators review
the positions of the parties, make decisions and,
where appropriate, render awards to resolve
disputes. CAMVAP decisions are fast, fair and
final as the arbitrator's award is binding on both
you and Ford of Canada.
*
[HS08500(ALL)05/96]
CAMVAP services are available in all territories
and provinces, except Quebec. For more
information, without charge or obligation, call
your CAMVAP Provincial Administrator directly
at 1-800-207-0685.
File:14cphsa.ex
Update:Thu Jun 6 14:45:58 1996
Page 325 of 347
334 [QI06200(ALL)05/96]
full page art:0095088-BRear cargo area (extended length wagon shown)
File:16cpqia.ex
Update:Fri Jun 14 10:21:06 1996