1997 DODGE NEON fuse box

Downloaded from www.Manualslib.com manuals search engine The second ground path is through the headlamp
switch. Circuit M23 is spliced in with the time out
relay. When the operator turns the headlamp switch
to the dome lamp ON position, a ground path is pro-
vided through the switch on the Z1 circuit. This
ground terminates at the instrument panel left cen-
ter support.
On vehicles equipped with Remote Keyless Entry
(RKE) the M23 circuit is spliced to the RKE module.
This allows the lamp to be turned ON when a valid
signal is reveived by the RKE module from the trans-
mitter.
MAP/READING LAMPS
The map/reading lamps are powered by the M1 cir-
cuit from the Power Distribution Center (PDC). This
circuit is the Ignition-Off Draw circuit and protected
by a 10 amp fuse. The M1 circuit is spliced and pro-
vides power for the visor/vanity lamps, radio, power
mirrors, dome lamp, time delay relay, and other inte-
rior lamps.
Ground for the lamps is provided from two sources.
One is the Z3 circuit which is spliced in with the
glove box lamp and terminates at the instrument
panel left center support. The second ground is pro-
vided on circuit M23. This circuit is spliced in with
the time out relay so the lamps will turn ON when
any door is OPENED.
On vehicles equipped with Remote Keyless Entry
(RKE) the M23 circuit, which is the ground circuit
when a door is OPENED, is connected to the RKE
module. The module will provide a ground path for
the lamps with a valid signal from the transmitter.
GLOVE BOX LAMP
The glove box lamp receives power on the M1 cir-
cuit from the 10 amp fuse located in the Power Dis-
tribution Center (PDC). A switch, wired in series
after the lamp, CLOSES when the glove box door is
opened, and completes a path to ground on the Z3
circuit.
The Z3 circuit is spliced in with the ash receiver
lamp, PRNDL lamp, and the time delay relay. The Z3
circuit terminates at the instrument panel left center
support.
ASH RECEIVER LAMP
The ash receiver lamp receives power on the E2
circuit from the 4 amp fuse located in the fuse block
in cavity 12. The fuse receives power from the head-
lamp switch. Circuit E2, which is HOT at all times,
also powers the Transmission Range Indicator
(PRNDL) lamp.
When the headlamp switch is moved to the PARK
or ON position, current flows through the fuse to the
ash receiver lamp. The ground for the lamp is sup-
plied on the Z3 circuit, and terminates at the instru-
ment panel left center support. This circuit is also
spliced in with the PRNDL lamp, the ignition switch
lamp, and the glove box lamp.
UNDERHOOD LAMP
Power for the underhood lamp is supplied on cir-
cuit M1. This is the Ignition-Off Draw (IOD) circuit
and is protected by a 10 amp fuse located in the
Power Distribution Center (PDC).
When the hood is raised a ground path is com-
pleted through the mercury switch to a case ground
illuminating the lamp.
TRUNK LAMP
The trunk lamp uses a case-grounded switch
located on the trunk latch. The switch is normally
OPEN. When the deck lid is opened, the switch
CLOSES, completing a path to ground on circuit M4.
The M1 circuit provides power to the lamp, and is
HOT at all times.
HELPFUL INFORMATION
²Check the 10 amp fuse located in the Power Dis-
tribution Center (PDC) for the trunk lamp, under-
hood lamp, visor/vanity lamps, dome lamp, time
delay relay, and the glove box lamp.
²Check for a good ground at the instrument panel
left center support.
²Check the door switches for a good ground.
²Check the 4 amp fuse in the fuse block, cavity
12.
8W - 44 - 6 8W - 44 INTERIOR LIGHTINGPL
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine 8W-47 AUDIO SYSTEMS
INDEX
page page
DESCRIPTION AND OPERATION
HELPFUL INFORMATION.................. 5
RADIO ILLUMINATION.................... 5RADIO MEMORY........................ 5
RADIO OPERATION...................... 5
SPEAKERS............................. 5
DESCRIPTION AND OPERATION
RADIO OPERATION
When the ignition switch is in either the ACCES-
SORY or RUN position, it connects circuit A1 from
the Power Distribution Center (PDC) to circuit A31.
Circuit A31 powers a bus bar in the fuse block. The
bus bar feeds two circuits, one of which is circuit
X12. Circuit X12 powers the radio. A 10 amp fuse, in
cavity 16 of the fuse block, protects circuit X12.
Circuit Z9 supplies the ground path for the radio.
The grounding point for circuit Z9 is the instrument
panel right center support.
RADIO MEMORY
Circuit M1 from the Power Distribution Center
(PDC) supplies power for the radio memory. The cir-
cuit contains the Ignition Off Draw (IOD) fuse. The
IOD fuse is removed during vehicle shipping to pre-
vent excessive battery draw.
RADIO ILLUMINATION
When the parking lamps or headlamps are ON, cir-
cuits E2 and L7 power the radio illumination lamps
and park lamps. Circuit E2 feeds the illumination
lamp. Circuit L7 feeds the park lamps of the radio.
Circuit F33 feeds circuit L7.
A 4 amp fuse, in cavity 12 of the fuse block, pro-
tects circuit E2. A 15 amp fuse, in cavity 2 of the fuse
block, protects circuits L7 and F33.
SPEAKERS
Circuit X53 feeds the speaker in the left front door.
Circuit X55 is the return from the speaker to the
radio. On the premium system the X53 and X55 cir-
cuits are connected in with the instrument panel
speaker.
Circuit X54 feeds the speaker in the right front
door. Circuit X56 is the return from the speaker to
the radio. On the premium system the X54 and X56
circuits are connected in with the instrument panel
speaker.
Circuit X51 feeds the left rear speaker. Circuit X57
is the return from the speaker to the radio.Circuit X52 feeds the right rear speaker. Circuit
X58 is the return from the speaker to the radio.
HELPFUL INFORMATION
²Circuit M1 also powers the vanity lamps, glove
box lamp, time delay relay, dome lamps, underhood
lamp, cargo lamp, and power mirrors.
²If the radio does not operate, check for blown
fuses in circuits A1 and X12.
²Circuits A3, and F33 feed the L7 circuit.
²If the radio illumination lamps do not operate,
check for blown fuses in circuits E2, F33, and A3.
PL8W - 47 AUDIO SYSTEMS 8W - 47 - 5

Downloaded from www.Manualslib.com manuals search engine 978W-1
8W - 80 - 5 PL-RHD 8W-80 CONNECTOR PIN-OUTS
PLR08005
CAV CIRCUIT FUNCTION
1 C22 20DB/WT LOW PRESSURE SWITCH OUTPUT
2 C21 20DB/OR A/C CYCLING SWITCH OUTPUT
A/C LOW
PRESSURE SWITCH
BLACK
12
CAV CIRCUIT FUNCTION
1 B142 20BR/YL LEFT FRONT DUMP SOLENOID CONTROL
2 B143 20DG/YL RIGHT FRONT DUMP SOLENOID CONTROL
3 B146 20BR/LB LEFT REAR DUMP SOLENOID CONTROL
4 B148 20DB/LB RIGHT REAR DUMP SOLENOID CONTROL
5 Z1 18BK GROUND
6 Z1 18BK GROUND
BLACK
CAV CIRCUIT FUNCTION
1 F12 18DG/WT ABS RELAY FEED
2 Ð Ð
3 B116 20GY ABS PUMP MOTOR RELAY CONTROL
4 B57 20BR/BK ABS SYSTEM RELAY CONTROL
5 A20 12RD/DG FUSED B(+)
6 B120 12BR/WT ABS PUMP MOTOR RELAY OUTPUT
7 G19 20LG/BR ABS WARNING LAMP DRIVER
8 Ð Ð
9 B47 20RD/LB ABS SYSTEM RELAY OUTPUT
10 Z1 14BK GROUND
DARK
GRAY
ABS HYDRAULIC
MODULATOR 31
64
ABS RELAY BOX 51
10 6
CAV CIRCUIT FUNCTION
1 R45 18DG/LB DRIVER AIRBAG SQUIB LINE 2
2 R43 18BK/LB DRIVER AIRBAG SQUIB LINE 1
3 R47 18DB/LB LEFT IMPACT SENSOR LINE 1
4 R49 18LB LEFT IMPACT SENSOR LINE 2
5 R42 18BK/YL PASSENGER AIRBAG SQUIB LINE 1
6 R44 18DG/YL PASSENGER AIRBAG SQUIB LINE 2
7 R46 18BR/LB RIGHT IMPACT SENSOR LINE 1
8 R48 18TN RIGHT IMPACT SENSOR LINE 2
9 R41 18BK/TN AIRBAG WARNING LAMP DRIVER
10 Z6 18BK/PK GROUND
11 R50 18BR/YL PASSENGER AIRBAG PRESSURE SWTICH SENSE
12 R51 18VT/YL PASSENGER AIRBAG PRESSURE SWITCH GROUND
17 F15 18DB/WT FUSED IGNITION SWITCH OUTPUT (RUN/START)
18 D2 20WT/BK CCD BUS (Ð)
19 D1 20VT/BR CCD BUS (+)
20 F25 18TN/LG FUSED IGNITION SWITCH OUTPUT (RUN)
11 1
22 12
AIRBAG CONTROL
MODULEYELLOW

Downloaded from www.Manualslib.com manuals search engine 978W-1
8W - 80 - 17 PL-RHD 8W-80 CONNECTOR PIN-OUTS
PLR08017
CAV CIRCUIT FUNCTION
1 Z1 18BK GROUND
2 Z2 18BK GROUND
3 G4 18DB FUEL LEVEL SENSOR SIGNAL
4 A141 18DG/WT FUEL PUMP RELAY OUTPUT
LT GRAY
FUEL PUMP
MODULE 41
BLACK
CAV CIRCUIT FUNCTION
1 A142 18DG/OR AUTOMATIC SHUTDOWN RELAY OUTPUT
2 K20 18DG GENERATOR FIELD DRIVER
GENERATOR 21
CAV CIRCUIT FUNCTION
1 M1 22PK FUSED B(+)
2 Z3 20BK/OR GROUND12
GLOVE BOX
LAMP AND SWITCHGRAY
HEADLAMP DIMMER
AND OPTICAL HORN
SWITCH 41BLACK
CAV CIRCUIT FUNCTION
1 L4 14VT/WT DIMMER SWITCH LOW BEAM OUTPUT
2 L2 14LG HEADLAMP SWITCH OUTPUT
3 L3 14RD/OR DIMMER SWITCH HIGH BEAM OUTPUT
4 L20 14LG/WT FUSED B(+)
BLACK
HEADLAMP
SWITCH 1
2
9
73
4
5
6 8
CAV CIRCUIT FUNCTION
1 E1 20TN PANEL LAMPS DIMMER SWITCH SIGNAL
2 L2 14LG HEADLAMP SWITCH OUTPUT
3 M2 22YL TIME OUT RELAY
4 F33 20PK/RD FUSED B(+)
5G26 20LB KEY-IN IGNITION SWITCH SENSEG26 20LB KEY-IN IGNITION SWITCH SENSE
6G16 20BK/LB LEFT FRONT DOOR JAMB SWITCH SENSEG16 20BK/LB LEFT FRONT DOOR JAMB SWITCH SENSE
7 L20 14LG/WT FUSED B(+)
8 A3 12RD/WT FUSED B(+)
9L7 20BK/YL PARK LAMP SWITCH OUTPUT
L7 20BK/YL PARK LAMP SWITCH OUTPUT
CAV CIRCUIT FUNCTION
1Ð Ð
2 L43 20VT LEFT HEADLAMP FEED
3 Z1 20BK GROUND
4 E2 20OR ILLUMINATION FEED
5 L13 20BR/YL HEADLAMP LEVELING SIGNAL TO MOTORSHEADLAMP LEVELING
SWITCH
12 345
BLACK