1997 DODGE NEON key

Downloaded from www.Manualslib.com manuals search engine The second ground path is through the headlamp
switch. Circuit M23 is spliced in with the time out
relay. When the operator turns the headlamp switch
to the dome lamp ON position, a ground path is pro-
vided through the switch on the Z1 circuit. This
ground terminates at the instrument panel left cen-
ter support.
On vehicles equipped with Remote Keyless Entry
(RKE) the M23 circuit is spliced to the RKE module.
This allows the lamp to be turned ON when a valid
signal is reveived by the RKE module from the trans-
mitter.
MAP/READING LAMPS
The map/reading lamps are powered by the M1 cir-
cuit from the Power Distribution Center (PDC). This
circuit is the Ignition-Off Draw circuit and protected
by a 10 amp fuse. The M1 circuit is spliced and pro-
vides power for the visor/vanity lamps, radio, power
mirrors, dome lamp, time delay relay, and other inte-
rior lamps.
Ground for the lamps is provided from two sources.
One is the Z3 circuit which is spliced in with the
glove box lamp and terminates at the instrument
panel left center support. The second ground is pro-
vided on circuit M23. This circuit is spliced in with
the time out relay so the lamps will turn ON when
any door is OPENED.
On vehicles equipped with Remote Keyless Entry
(RKE) the M23 circuit, which is the ground circuit
when a door is OPENED, is connected to the RKE
module. The module will provide a ground path for
the lamps with a valid signal from the transmitter.
GLOVE BOX LAMP
The glove box lamp receives power on the M1 cir-
cuit from the 10 amp fuse located in the Power Dis-
tribution Center (PDC). A switch, wired in series
after the lamp, CLOSES when the glove box door is
opened, and completes a path to ground on the Z3
circuit.
The Z3 circuit is spliced in with the ash receiver
lamp, PRNDL lamp, and the time delay relay. The Z3
circuit terminates at the instrument panel left center
support.
ASH RECEIVER LAMP
The ash receiver lamp receives power on the E2
circuit from the 4 amp fuse located in the fuse block
in cavity 12. The fuse receives power from the head-
lamp switch. Circuit E2, which is HOT at all times,
also powers the Transmission Range Indicator
(PRNDL) lamp.
When the headlamp switch is moved to the PARK
or ON position, current flows through the fuse to the
ash receiver lamp. The ground for the lamp is sup-
plied on the Z3 circuit, and terminates at the instru-
ment panel left center support. This circuit is also
spliced in with the PRNDL lamp, the ignition switch
lamp, and the glove box lamp.
UNDERHOOD LAMP
Power for the underhood lamp is supplied on cir-
cuit M1. This is the Ignition-Off Draw (IOD) circuit
and is protected by a 10 amp fuse located in the
Power Distribution Center (PDC).
When the hood is raised a ground path is com-
pleted through the mercury switch to a case ground
illuminating the lamp.
TRUNK LAMP
The trunk lamp uses a case-grounded switch
located on the trunk latch. The switch is normally
OPEN. When the deck lid is opened, the switch
CLOSES, completing a path to ground on circuit M4.
The M1 circuit provides power to the lamp, and is
HOT at all times.
HELPFUL INFORMATION
²Check the 10 amp fuse located in the Power Dis-
tribution Center (PDC) for the trunk lamp, under-
hood lamp, visor/vanity lamps, dome lamp, time
delay relay, and the glove box lamp.
²Check for a good ground at the instrument panel
left center support.
²Check the door switches for a good ground.
²Check the 4 amp fuse in the fuse block, cavity
12.
8W - 44 - 6 8W - 44 INTERIOR LIGHTINGPL
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine 8W-52 TURN SIGNALS
INDEX
page page
DESCRIPTION AND OPERATION
HAZARD FLASHERS..................... 5TURN SIGNALS......................... 5
DESCRIPTION AND OPERATION
TURN SIGNALS
Voltage for the turn signals flows from the Power
Distribution Center (PDC) to the ignition switch on
circuit A2. With the key in the RUN position, the
ignition switch connects voltage from the A2 circuit
to the A22 circuit. A 40 amp fuse in the PDC protects
the A2 and A22 circuits.
Circuit A22 connects to a bus bar in the fuse block.
L5 is one of the circuits fed by the bus bar. Circuit
L5 contains a 10 amp fuse and supplies voltage to
the multi-function switch. The multi- function switch
supplies voltage to the combination flashing unit on
circuit L55. Voltage leaves the combination flashing
unit on circuit L32 and flows to the multi-function
switch connector.
RIGHT TURN SIGNAL
When the operator selects the right turn signal,
the multi-function connects power from circuit L32 to
circuits L60 and L62. Circuit L62 connects to the
multi-function switch and feeds the right rear turn
signal/hazard flasher/stop lamp.
Circuit L60 connects to the multi-function switch
and feeds the right front turn signal/hazard flasher
lamp and side marker lamp. Circuit L60 also splices
to power the turn signal indicator lamp on the
instrument cluster.
LEFT TURN SIGNAL
When the operator selects the left turn signal, the
multi-function connects power from circuit L32 to cir-
cuits L61 and L63. Circuit L63 connects to the multi-
function switch and feeds the left rear turn signal/
hazard flasher/stop lamp.
Circuit L61 connects to the multi-function switch
and feeds the left right front turn signal/hazard
flasher lamp and side marker lamp. Circuit L61 also
splices to power the turn signal indicator lamp on the
instrument cluster.
GROUND CIRCUIT
Circuit Z1 provides ground for all the turn signal
lamps, although the it has different grounding pointsfor each turn signal circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is the left side of
the radiator closure panel.
²For the right front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp, the Z1 circuit grounding point is in the left
rear wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp, the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
²A 10 amp fuse, in cavity 6 of the fuse block, pro-
tects circuit L5.
²A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
²The bus bar in the fuse block that connects to
circuit A22 and feeds circuit L5 for the turn signals
also powers three other fuse protected circuits. The
other circuits are C1, F20 and F25.
HAZARD FLASHERS
Circuit L9 from the Power Distribution Center
(PDC) supplies battery voltage for the hazard flash-
ers. A 10 amp fuse in the PDC protects circuit L9.
Circuit L9 connects to the multi-function switch.
With the hazard flashers ON, the multi-function
switch connects circuits L9 and L55.
Circuit L55 feeds the combination flashing unit.
Circuit Z2 provides ground for the flashing unit.
From the flashing unit, circuit L32 connects to the
multi-function switch. With the hazard flashers ON,
the multi-function switch connects circuit L32 to cir-
cuits L60, L61, L62, and L63.
PL8W - 52 TURN SIGNALS 8W - 52 - 5

Downloaded from www.Manualslib.com manuals search engine 8W-80 CONNECTOR PIN-OUTS
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
Component Page
A/C Compressor Clutch................8W-80-4
A/C Cycling switch...................8W-80-4
A/C-Heater Blower Motor..............8W-80-4
A/C-Heater Control Switch.............8W-80-4
A/C High Pressure Switch..............8W-80-4
A/C Low Ptressure Switch..............8W-80-5
ABS Hydraulic Modulator..............8W-80-5
ABS Relay Box......................8W-80-5
Airbag Control Module................8W-80-5
Ash Receiver lamp...................8W-80-6
Back-Up Lamp Switch (MTX)...........8W-80-6
Battery Temperature Sensor............8W-80-6
Blower Motor Resister Block............8W-80-6
Brake Warning Lamp Switch...........8W-80-6
C101..............................8W-80-7
C102..............................8W-80-7
C103..............................8W-80-7
C105..............................8W-80-8
C108..............................8W-80-8
C160..............................8W-80-8
C161..............................8W-80-8
C203..............................8W-80-9
C205..............................8W-80-9
C206..............................8W-80-9
C225..............................8W-80-9
C230.............................8W-80-10
C231.............................8W-80-10
C241.............................8W-80-10
C301.............................8W-80-11
C303.............................8W-80-11
C309.............................8W-80-11
C315.............................8W-80-11
C323.............................8W-80-11
C324.............................8W-80-11
C325.............................8W-80-12
C340.............................8W-80-12
C341.............................8W-80-12
Camshaft Position Sensor.............8W-80-12
Clockspring........................8W-80-12
Clutch Pedal Position Switch (MTX).....8W-80-12
Controller Anti-Lock Brake............8W-80-13
Crankshaft Position Sensor............8W-80-14
Data Link Connector.................8W-80-14
Dome Lamp........................8W-80-14
Downstream Heated Oxygen Sensor.....8W-80-15Component Page
Driver Side Airbag..................8W-80-15
Duty Cycle Evap/Purge Solenoid........8W-80-15
EGR Transducer solenoid.............8W-80-15
Engine Coolant Temperature
Sensor (ECT).....................8W-80-15
Engine Oil Pressure Switch............8W-80-16
Front Fog Lamp Switch...............8W-80-16
Fuel Injector No.1...................8W-80-16
Fuel Injector No.2...................8W-80-16
Fuel Injector No.3...................8W-80-16
Fuel Injector No.4...................8W-80-16
Fuel Pump Module..................8W-80-17
Generator.........................8W-80-17
Glove Box Lamp and Switch...........8W-80-17
Headlamp Dimmer and Optical
Horn Switch.....................8W-80-17
Headlamp Leveling Switch............8W-80-17
Headlamp Switch...................8W-80-17
Horn No.1.........................8W-80-18
Horn No.2.........................8W-80-18
(IAT/Map) Sensor...................8W-80-18
Idle Air Control Motor (IAC)...........8W-80-18
Ignition Coil Pack...................8W-80-18
Ignition Switch.....................8W-80-19
Immobilizer Engine Sensor............8W-80-19
Immobilizer Sensor..................8W-80-19
Instument Cluster - C1...............8W-80-19
Instument Cluster - C2...............8W-80-19
Intermittent Wipe/Wash Switch........8W-80-20
Key-In Switch......................8W-80-20
Knock Sensor......................8W-80-20
Left Airbag Impact Sensor.............8W-80-20
Left Back-Up Lamp..................8W-80-20
Left Door Lock Switch................8W-80-21
Left Door Window Motor..............8W-80-21
Left Fog Lamp......................8W-80-21
Left Front Door Lock Motor...........8W-80-21
Left Front Door Speaker..............8W-80-21
Left Front Wheel Speed Sensor.........8W-80-22
Left Headlamp.....................8W-80-22
Left Headlamp Leveling Motor.........8W-80-22
Left Instrument Panel Speaker
(Premium).......................8W-80-22
Left License Lamp...................8W-80-22
Left Park/Turn Signal Lamp...........8W-80-22
8W - 80 - 2 8W - 80 CONNECTOR PIN-OUTSPL

Downloaded from www.Manualslib.com manuals search engine 978W-1
8W - 80 - 17 PL-RHD 8W-80 CONNECTOR PIN-OUTS
PLR08017
CAV CIRCUIT FUNCTION
1 Z1 18BK GROUND
2 Z2 18BK GROUND
3 G4 18DB FUEL LEVEL SENSOR SIGNAL
4 A141 18DG/WT FUEL PUMP RELAY OUTPUT
LT GRAY
FUEL PUMP
MODULE 41
BLACK
CAV CIRCUIT FUNCTION
1 A142 18DG/OR AUTOMATIC SHUTDOWN RELAY OUTPUT
2 K20 18DG GENERATOR FIELD DRIVER
GENERATOR 21
CAV CIRCUIT FUNCTION
1 M1 22PK FUSED B(+)
2 Z3 20BK/OR GROUND12
GLOVE BOX
LAMP AND SWITCHGRAY
HEADLAMP DIMMER
AND OPTICAL HORN
SWITCH 41BLACK
CAV CIRCUIT FUNCTION
1 L4 14VT/WT DIMMER SWITCH LOW BEAM OUTPUT
2 L2 14LG HEADLAMP SWITCH OUTPUT
3 L3 14RD/OR DIMMER SWITCH HIGH BEAM OUTPUT
4 L20 14LG/WT FUSED B(+)
BLACK
HEADLAMP
SWITCH 1
2
9
73
4
5
6 8
CAV CIRCUIT FUNCTION
1 E1 20TN PANEL LAMPS DIMMER SWITCH SIGNAL
2 L2 14LG HEADLAMP SWITCH OUTPUT
3 M2 22YL TIME OUT RELAY
4 F33 20PK/RD FUSED B(+)
5G26 20LB KEY-IN IGNITION SWITCH SENSEG26 20LB KEY-IN IGNITION SWITCH SENSE
6G16 20BK/LB LEFT FRONT DOOR JAMB SWITCH SENSEG16 20BK/LB LEFT FRONT DOOR JAMB SWITCH SENSE
7 L20 14LG/WT FUSED B(+)
8 A3 12RD/WT FUSED B(+)
9L7 20BK/YL PARK LAMP SWITCH OUTPUT
L7 20BK/YL PARK LAMP SWITCH OUTPUT
CAV CIRCUIT FUNCTION
1Ð Ð
2 L43 20VT LEFT HEADLAMP FEED
3 Z1 20BK GROUND
4 E2 20OR ILLUMINATION FEED
5 L13 20BR/YL HEADLAMP LEVELING SIGNAL TO MOTORSHEADLAMP LEVELING
SWITCH
12 345
BLACK

Downloaded from www.Manualslib.com manuals search engine 978W-1
8W - 80 - 19 PL-RHD 8W-80 CONNECTOR PIN-OUTS
PLR08019
BLACK
51
10 6
IGNITION
SWITCH
CAV CIRCUIT FUNCTION
1 Z1 22BK GROUND
2 G9 22GY/BK RED BRAKE WARNING LAMP DRIVER
3 A2 12PK/BK FUSED B(+)
4 A22 12BK/OR IGNITION SWITCH OUTPUT (RUN)
5Ð Ð
6Ð Ð
7 A1 14RD FUSED (B+)
8 A31 14BK/WT IGNITION SWITCH OUTPUT (ACC/RUN)
9 A21 14DB IGNITION SWITCH OUTPUT (RUN/START)
10 A41 14YL/BK IGNITION SWITCH OUTPUT (START)
CAV CIRCUIT FUNCTION
1 K241 20GY/BK IMMOBILIZER SENSOR
2 K240 20GY IMMOBILIZER SENSOR
IMMOBILIZER
ENGINE SENSOR
CAV CIRCUIT FUNCTION
1 K241 20GY/BK IMMOBILIZER ENGINE SENSOR
2 K4 20BK/LB SENSOR GROUND
3K7 20OR 8 VOLT SUPPLYK7 20OR 8 VOLT SUPPLY
4 K240 GY IMMOBILIZER ENGINE SENSORIMMOBILIZER
SENSOR
CAV CIRCUIT FUNCTION
1Ð Ð
2 L3 16RD/OR DIMMER SWITCH HIGH BEAM OUTPUT
3 L60 22TN RIGHT TURN SIGNAL
4 G10 20LG/RD SEAT BELT SWITCH SENSE
5 G5 20DB/WT FUSED IGNITION SWITCH OUTPUT (RUN/START)
6 M1 22PK FUSED B(+)
7 G21 22GY/LB TACHOMETER SIGNAL
8 Z3 16BK/OR GROUND
9 R41 18BK/TN AIRBAG WARNING LAMP DRIVER
10 G7 22WT/OR VEHICLE SPEED SENSOR SIGNAL
BLACK
5 1
10 6
INSTRUMENT CLUSTER Ð C1
CAV CIRCUIT FUNCTION
1 G6 22GY OIL PRESSURE SWITCH SENSE
2 G19 22LG/OR ABS WARNING LAMP DRIVER
3 G3 22BK/PK CHECK ENGINE LAMP DRIVER
4 G20 22VT/YL ECT GAUGE SENSOR SIGNAL
5 G26 20LB KEY-IN IGNITION SWITCH SENSE
6 G9 22GY/BK RED BRAKE WARNING LAMP DRIVER
7 G12 22TN/BK GENERATOR LAMP DRIVER
8 L61 22LG LEFT TURN SIGNAL
9 E2 22OR PANEL LAMPS DRIVER
10 G4 20DB FUEL LEVEL SENSOR SIGNAL
BLACK
5 1
10 6
INSTRUMENT CLUSTER Ð C2
1 2
BLACK
12
34
BLACK
GRAY
NATURAL
12
34

Downloaded from www.Manualslib.com manuals search engine 978W-1
PL-RHD 8W - 80 - 20 8W-80 CONNECTOR PIN-OUTS
PLR08020
CAV CIRCUIT FUNCTION
1 G16 20BK/LB LEFT FRONT DOOR JAMB SWITCH SENSE
2 G26 20LB KEY-IN IGNITION SWITCH SENSE
GREEN
KEY-IN SWITCH
2 1
CAV CIRCUIT FUNCTION
1 K42 20DB/LG*KNOCK SENSOR SIGNAL
1 K42 20BK/LGlKNOCK SENSOR SIGNAL
2 K4 20BK/LB SENSOR GROUND
BLACK
*2.0L SOHC ENGINEl2.0L DOHC ENGINE
**WITH INTERMITTENT WIPERS 21
KNOCK
SENSOR
CAV CIRCUIT FUNCTION
1 R47 18DB/LB LEFT IMPACT SENSOR LINE 1
2 R49 18LB LEFT IMPACT SENSOR LINE 2
BLACK
21
LEFT
AIRBAG IMPACT SENSOR
LEFT BACK-UP
LAMP
CAV CIRCUIT FUNCTION
1 L1 18VT/BK BACK-UP LAMP SENSE
2 Z1 18BK GROUND
CAV CIRCUIT FUNCTION
1 Z2 22BK/LG**GROUND
2 V5 18DG/YL WIPER RELAY COMMON
3 V10 18BR WINDSHIELD WASHER RELAY OUTPUT
4 V3 18BR/WT WIPER SWITCH LOW SPEED OUTPUT
5 F13 18DB FUSED IGNITION SWITCH OUTPUT (RUN/ACC)
6 V4 18RD/YL WIPER SWITCH HIGH SPEED OUTPUT
GRAY
INTERMITTENT
WIPE/WASH
SWITCH 61
2 1
BLACKGRAY

Downloaded from www.Manualslib.com manuals search engine Connector
Name/NumberColor Location Fig.
Engine Oil Pressure
SwitchGN Rear of Engine 7
EGR Transducer
SolenoidGY Left Rear of
Engine7
Front Fog Lamp
SwitchGN Rear of Switch 14
Fuel Injector #1 BK At Injector 8
Fuel Injector #2 BK At Injector 8
Fuel Injector #3 BK At Injector 8
Fuel Injector #4 BK At Injector 8
Fuel Pump Module LT/
GYRight Rear
Frame Rail19
Generator BK Rear of
Generator7
Glove Box Lamp
and SwitchGY Rear of Switch 13
Headlamp Dimmer
and Optical Horn
SwitchBK Rear of Switch 10
Headlamp Leveling
SwitchBK Rear of Switch 10
Headlamp Switch BK Rear of Switch 14
Horn #1 BK Left Rear of
Fascia6
Horn #2 BK Left Rear of
Fascia6
Idle Air Control
MotorBK On Throttle
Body8
Ignition Coil Pack BK Top of Valve
Cover7
Ignition Switch BK Rear of Switch 10
Immobilizer Engine
SensorBK Right Fender
Side ShieldN/S
Immobilizer Sensor BK Top of I.P. N/S
Instrument Cluster
C1BK Rear of Cluster 14
Instrument Cluster
C2BK Rear of Cluster 14
Intake Air
Temp/MAP SensorBK Left Side of
Intake8
Intermittent
Wipe/Wash SwitchNAT Rear of Switch 10
Key-In Switch GN Rear of Switch 10
Knock Sensor GY Front of Engine 8Connector
Name/NumberColor Location Fig.
Left Airbag Impact
SensorGY Left Side of
Radiator Closure
Panel1
Left Back-Up Lamp GY At Lamp 20
Left Door Lock
SwitchWT At Switch 12
Left Door Window
MotorBK At Motor 12
Left Fog Lamp BK Rear of Lamp 4
Left Front Door
Lock MotorBK At Motor 12
Left Front Door
SpeakerBK At Speaker 12
Left Front Wheel
Speed SensorGY Left Fender Side
ShieldN/S
Left Headlamp BK At Lamp 6
Left Headlamp
Leveling MotorBK Rear of Left
HeadlampN/S
Left Instrument
Panel SpeakerBK At Speaker N/S
Left License Lamp NAT At Lamp 18
Left Park/Turn
Signal LampBK Rear of Lamp 6
Left Power Mirror BK At Mirror 12
Left Power Window
SwitchWT At Switch 12
Left Rear Door
Lock MotorBK Rear of Door 15
Left Rear Fog
LampNAT At Lamp N/S
Left Rear Speaker BK At Speaker 16
Left Rear Wheel
Speed SensorBK Left Rear Frame
RailN/S
Left Repeater Lamp BK At Lamp N/S
Left Tail/Stop Lamp BK At Lamp 20
Left Turn Signal
LampNAT At Lamp 6
Map/Reading
LampsBK At Lamp 9
Master Power
Window SwitchWT At Switch 12
Park/Neutral
Position SwitchBK Front of
Transmission3
Passenger Side
AirbagYL Left Side of I.P. 13
8W - 90 - 2 8W - 90 CONNECTOR/GROUND LOCATIONSPL
DESCRIPTION AND OPERATION (Continued)