1997 DODGE NEON Wiring Diagrams Workshop Manual

tire size change time headlamp pairing phone fuel pump check transmission fluid

Page 137 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine 8W-50 FRONT LIGHTING
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.

Downloaded from www.Manualslib.com manuals search engine 8W-50 FRONT LIGHTING
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.......................................................... 7
Component Page
A/C Heater Control Switch.............8W-50-2
Fog Lamp Relay...................8W-50-3, 6
Front Fog Lamp Switch.............8W-50-5, 6
Fuse 2 (FB).......................8W-50-2, 5
Fuse 3 (PDC)........................8W-50-2
Fuse 9 (FB).......................8W-50-2, 4
Fuse 16 (PDC).......................8W-50-6
Fuse 17 (FB)......................8W-50-3, 4
Fuse 18 (FB)........................8W-50-3
Fuse Block.........................8W-50-2
Fuse Block.........................8W-50-3
Fuse Block.........................8W-50-4
Fuse Block.........................8W-50-5
G101..........................8W-50-3, 4, 6
G103..........................8W-50-3, 4, 6
G204............................8W-50-4, 6
Headlamp Dimmer And Optical
Horn Switch..................8W-50-2, 3, 4
Headlamp Leveling Switch...........8W-50-2, 4
Headlamp Switch..............8W-50-2, 4, 5, 6
Instrument Cluster...................8W-50-3
Left Fog Lamp......................8W-50-6
Left Headlamp..................8W-50-3, 4, 6
Left Headlamp Leveling Motor..........8W-50-4
Left License Lamp...................8W-50-5
Left Park/Turn Signal Lamp............8W-50-5
Power Distribution Center...........8W-50-2, 6Component Page
Radio..............................8W-50-5
Rear Fog Lamp Switch..............8W-50-2, 6
Right Fog Lamp.....................8W-50-6
Right Headlamp.....................8W-50-3
Right Headlamp Leveling Motor.........8W-50-4
Right Park/Turn Signal Lamp.........8W-50-3, 5
Right Repeater Lamp.................8W-50-3
S107............................8W-50-3, 6
S108..............................8W-50-4
S113 ..............................8W-50-5
S114 ..............................8W-50-3
S115 ..............................8W-50-6
S116 ..............................8W-50-3
S117 ..........................8W-50-3, 4, 6
S127..............................8W-50-3
S133............................8W-50-3, 4
S201..............................8W-50-6
S202..............................8W-50-4
S207..............................8W-50-3
S209..............................8W-50-3
S210............................8W-50-2, 4
S213..............................8W-50-2
S221..............................8W-50-2
S306..............................8W-50-5
Turn Signal/Hazard Switch.............8W-50-3
8W - 50 - 2 8W - 50 FRONT LIGHTINGPL

Page 138 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine 40A
FUSE
3
BATT A0
POWER
DISTRIBUTION
CENTER
8
A3
12
RD/WT
3
C102
S213
3
A3
12
RD/WT
A3
12
RD/WT
22
PK/RD20 F33
BATT A3
2FUSE15A
1
4
0
2
1
0 OF

Page 139 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine C10316
2
L44
18
VT/BK
HEADLAMP RIGHT
FEED BEAMLOW
HEADLAMP
DIMMER
AND
OPTICAL
HORN
SWITCH
1
L4
14
VT/WT
RD/OR14L3 3
HIGH
BEAM
FEED
FUSE
BLOCK
3

Page 140 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine VT/WT14L4 1
FUSE
BLOCK
SWITCH HORN
OPTICAL
AND
DIMMER
HEADLAMP
37
17FUSE10A
VT20 L43
C10316
L43
20
VT
L43
20
VT
352
SWITCH LEVELING
HEADLAMP
L1

Page 141 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine 22
PK/RD20 F33
BATT A3
2FUSE15A
1BLOCK
FUSE
4
9
3 OFF
2 PARK
1 HEAD
SWITCH
HEADLAMP
1
2 0
C24
RADIOL7
20
BK/YL
L7 20BK/YL
2C230
1
SWITCH LAMP
F

Page 142 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine 45246
HEADLAMP LEFT
5
1WT/LB18 L39
WT/LB18 L39
2
BK/OR14Z3
S201
BK/OR20 Z3
G204
Z1
20
BK
(IN PDC) RELAY
LAMP
FOG
LAMP FOG
LEFT RIGHT
FOG
LAMP
B

Page 143 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine 8W-50 FRONT LIGHTING
INDEX
page page
GENERAL INFORMATION
INTRODUCTION......................... 7
DESCRIPTION AND OPERATION
FOG LAMPS (FRONT)...

Downloaded from www.Manualslib.com manuals search engine 8W-50 FRONT LIGHTING
INDEX
page page
GENERAL INFORMATION
INTRODUCTION......................... 7
DESCRIPTION AND OPERATION
FOG LAMPS (FRONT).................... 8HEADLAMP LEVELING MOTORS............ 8
HEADLAMPS........................... 7
PARKING LAMPS........................ 7
GENERAL INFORMATION
INTRODUCTION
The headlamp switch has 3 positions, ON, PARK
(parking lights) and OFF. Two circuits, L2 and L20
connect the headlamp switch to the headlamp dim-
mer/optical horn switch located in the multi-function
switch. The multi-function switch feeds the low and
high beams of the headlamps.
DESCRIPTION AND OPERATION
PARKING LAMPS
Circuit A3 in the Power Distribution Center (PDC)
connects to a bus bar in the fuse block. One of the
four circuits powered by the bus bar is circuit F33.
Circuit F33 connects to the headlamp switch. A 40
amp fuse in the PDC protects the A3 circuit. A 15
amp fuse, in cavity 2 of the fuse block, protects the
F33 circuit.
The headlamp switch has 3 positions, ON, PARK
(tail lamps) and OFF, plus a dimmer switch. When
the headlamp switch is in the PARK or ON position,
the switch connects circuit F33 to circuit L7. From
the headlamp switch, circuit L7 branches to power
the front parking lamps and rear tail lamps, lavalier
lamps, side marker lamps, and rear license plate
lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the parking lamps,
headlamps, lavalier lamps, tail lamps, side marker
lamps and rear license plate lamp although different
grounding points are used. Circuit Z1 also provides
the ground path for the headlamps and turn signals.
HELPFUL INFORMATION
²Check for a blown 40 amp fuse in the PDC.
²Check for a blown fuse in cavity 2 of the fuse
block.
²For the left front parking lamp, turn signal, side
marker lamp and left headlamp, the Z1 circuitgrounding point is the left side of the radiator closure
panel.
²For the right front parking lamp, turn signal,
side marker lamp and right headlamp, the Z1 circuit
grounding point is in the right fender side shield.
²Circuit L7 also feeds the radio, if equipped.
²When the headlamp switch is in the PARK or
ON position, the dimmer circuit, F33, also connects
to circuit E1. Circuit E1 powers the ash receiver
lamp, transmission range indicator lamp, instrument
panel cluster illumination lamps, HVAC control
lamp, heated rear window lamp, and radio lamp. A 4
amp fuse, in cavity 12 of the fuse block, protects cir-
cuit E1.
HEADLAMPS
The headlamp switch has 3 positions, ON, PARK
(parking lights) and OFF. Two circuits, L2 and L20
connect the headlamp switch to the headlamp dim-
mer/optical horn switch located in the multi-function
switch. The multi-function switch feeds the low and
high beams of the headlamps.
HEADLAMP SWITCH IN OFF OR PARKING
LAMP POSITION
Circuit A3 originates in the Power Distribution
Center (PDC) and supplies battery voltage for the
headlamp switch. A 40 amp fuse protects the A3 cir-
cuit. The headlamp switch has an internal 24 amp
circuit breaker that connects circuit A3 to either the
L2 or L20 circuits, depending on switch position.
In the OFF and PARK positions the headlamp
switch feeds the L20 circuit that connects to the
multi-function switch. Circuit L20 powers the high
beam circuit when the operator flashes the head-
lamps with the turn signal stalk of the multi-func-
tion switch. When the operator flashes the
headlamps with the stalk, the multi-function switch
connects the L20 circuit to the L3 circuit. The L3 cir-
cuit feeds the high beam of the headlamps.
HEADLAMP SWITCH IN ON POSITION
When the headlamp switch is in the ON position,
it connects the A3 circuit from the PDC to circuit L2.
PL8W - 50 FRONT LIGHTING 8W - 50 - 7

Page 144 of 256

DODGE NEON 1997 1.G Wiring Diagrams Workshop Manual Downloaded from www.Manualslib.com manuals search engine Circuit L2 connects to the multi- function switch and
feeds the L4 circuit (for low beam operation). The L4
circuit connects to a bus bar in th

Downloaded from www.Manualslib.com manuals search engine Circuit L2 connects to the multi- function switch and
feeds the L4 circuit (for low beam operation). The L4
circuit connects to a bus bar in the fuse block. Cir-
cuits L43 and L44 connect to the bus bar in fuse
block and power the low beam headlamps. Circuit
L43 supplies voltage to the left headlamp. Circuit
L44 supplies voltage to the right headlamp. Both the
L43 and L44 circuits have separate 10 amp fuses
located in fuse block. Fuse 17 protects circuit L43,
and fuse 18 protects circuit L44.
When the operator selects high beam operation
with the turn signal stalk of the multi-function
switch, circuit L2 connects to the L3 Circuit L3 pow-
ers high beam operation.
HEADLAMP GROUND
Although circuit Z1 provides ground for the right
and left headlamps it has different termination
points for both. For the right headlamp the Z1 circuit
terminates at the right inner fender shield. For the
left headlamp the Z1 circuit terminates at the left
side of the radiator closure panel.
HELPFUL INFORMATION
²Check for a blown fuse in cavity 17 for L43 and
cavity 18 for L44.
²Check the 40 amp fuse located in the PDC.
²The headlamp switch has a 24 amp internal cir-
cuit breaker.
²For the left front parking lamp, turn signal, side
marker lamp and left headlamp, the Z1 circuit
grounding point is the left side of the radiator closure
panel.
²For the right front parking lamp, turn signal,
side marker lamp and right headlamp, the Z1 circuit
grounding point is in the right fender side shield.
HEADLAMP LEVELING MOTORS
The headlamp leveling system used in this vehicle
uses a variable position switch located in the instru-
ment panel along with headlamp leveling motors
located at the headlamps.
Power for the switch and the leveling motors is
supplied on circuit L43. This circuit is HOT when the
headlamp switch is in the ON position and the oper-
ator has selected LOW beam operation. In addition,circuit L43 is protected by a 10 amp fuse located in
the fuse block and is the feed for the left LOW beam
headlamp.
Ground for the switch is supplied on circuit Z1.
When the operator moves the switch, power is sup-
plied on circuit L13 from the switch to the headlamp
leveling motors. Ground for the leveling motors is
supplied on circuit Z1 and has the same termination
point as the respective headlamps.
The headlamp leveling switch also has a lamp
located in it for night illumination. Power for the
lamp is supplied on circuit E2. The E2 circuit is HOT
when the operator has turned the headlamp switch
to the PARK or ON position. The E2 circuit is pro-
tected by a 4 amp fuse located in the fuse block.
FOG LAMPS (FRONT)
The fog lamp system in this vehicle uses a switch
located in the instrument panel along with a relay
located in the Power Distribution Center (PDC).
Power for the switch is supplied on circuit L7. This
circuit is the feed for the front and rear parking
lamps and is HOT when the headlamp switch is in
the PARK position.
Power for the contact side of the relay is supplied
on circuit F61. This circuit is HOT at all times and
protected by a 20 amp fuse in the PDC. Ground for
the coil side of the relay is supplied in circuit Z1.
When the operator turns the lamps ON by closing
the switch, power flows on circuit L7 through the
switch to circuit L35. Circuit L35 connects from the
switch to the coil side of the fog lamp relay. With this
input the contacts in the fog lamp relay CLOSE con-
necting circuits F61 and L39.
Circuit L39 connects from the relay to the fog
lamps. Ground for the lamps is supplied on circuit
Z1.
HELPFUL INFORMATION
²Check the 20 amp fuse located in the PDC for
the fog lamps
²Check the lamp filament
²Check the grounding points for the lamps,
switch and relay
8W - 50 - 8 8W - 50 FRONT LIGHTINGPL
DESCRIPTION AND OPERATION (Continued)

Load next 8 pages

Page: < prev 1-10 ... 105-112 113-120 121-128 129-136 137-144 145-152 153-160 161-168 169-176 ... 256 next >

inflation pressure clock reset wheel bolts cruise control coolant level remote control