1997 CHEVROLET S10 headlamp

Downloaded from www.Manualslib.com manuals search engine Tilt Wheel (If Equipp-ed)
If you have the tilt steering
wheel, you
shou1.d adjust
the steering wheel before
you drive.
You can raise it. to the
highest level to give your
legs
more room when you
enter ,and exit the vehicle.
To tilt the. wheel, hold the steering wheel and puli the
lever
toward you, Move the steering wheel to a
comfortable level, then release the lever to lock the
wheel in place..
Do not adjust the steering wheel while driving,
Turn Sig-nal/Multifunction Lever
The lever on the left side of the steering column
-includes your:
Turn Signal and Lane Change Indicator
Headlamp High/Low Beam Changer
0 Windshield Wipers
0 Windshield Washer
0 Cruise Control (If Equipped)

Downloaded from www.Manualslib.com manuals search engine Turn and Lane Change Si,gnak
The turn signal has two upward (fat right) and- two
ciownwa~d
(for left) p??sitions. Tbese positions allow you
to signal a turn 0.r a.lane. change:
To signal -a turn, move the lever all the way up or down.
When the turn is finished, the lever will return aut~omatically.
An anow on. the instrume
panel will flash in the
direction
of the- turn or
lane change.
If a bulb is: burned.out, replace it.t-o help avoid an
acc.ident. If the arfows don’t g.0 on at all when you
sign-a1 a turn, check the fuse (see “Fu-se.s and Circuit
Breakersl’ in the .Ind.ex) and for burned-oat bulbs.
If you have n trailer towing option with -added wiring, for
the. traiier%mps, a d-ifferent turn :signal flasher is used.
With this flashes installed, the signal. indicator will flash
even if a.tum
signal bulb is burllid OW. Check the-ffont
an.d rear turn signal lamps -regularly tu make sure. they
are working.
Headl-amp High/Low Beam Changer
To change the headlamps from low to high-beam or
high to low-beam, pull the multifunction lever all the
way t.oward you. Then release it.
To signa1 a Lane change, j,ust raise- or lower the. lever
until the arrow starts to flash. Hold it there until you
Complete your lane,c,hangc, The kevei- will return by
itself when you release it.
As you signal a turn -or a lane c,hange, if the armws don’t
flash but just sxay on, a signal buIb may be burned Gut
arid other. drivers won’t ,see. your turn signal.. When the.’hi.gh-beam
headlamps are
on,. this
indicator
light .OM the
instrument pgniJ will
dso be on.
..
2-38

Downloaded from www.Manualslib.com manuals search engine Exterior Lamps Press the top sWitdl1 with the parking lamps symbol on it
to turn on:
@ Parking Lmps
0 Sidemarker Lamps
* Taillamp
0 License Plate Lamps
hstrument Panel Lights
0 Trmsfer Case Indicator Light (if you hgve one)
Press the bottom switch with the master 1,amps symbol
on it to tun. gn all the lamps listed -above as weli 'as
the headlamps.
Press the side of the switch marked OFF to-turn off
your 1a.mp.s.
The switches-are on the driver',$ side of your
instrument -panel.
2-43

Downloaded from www.Manualslib.com manuals search engine Lamps On Reminder
Aren&idertone will sound when your headlamps or.
pzi&irig:.lamps ,-and interior lamps are turned on and your
ignition is
in OFF, LOCK -or ACCESS-'ORY To turn the
to.ne off, press the OFF switch.
Daytime Running Lamps,
Daytime Running Lamps (DRL) can make it easier for
dthezs to- s-eethe front of your vehicle during the day.
DRL can be helpful in many different driving
amditions,
but they can, be especially helpful in the
short periods after- dawn and before sunset.
The DRL;syste;m will make your headlamps come on at
reduced brightness when:
* the ignition is on,
the headlamp switchis off and
tkparking brake. is released.
When the DRL are on, only your he-adlamps will be on.
The taillamp, sidemarker md other lamps wan't be on,
The. instrument panel won't be lit up either.
When it begins to get dark, your DRL ifidicator light: is a
reminder to turn yoar headlamp switch .on. The other
lamp3 that come on with your headlamps will al9.0
Come on.
When you 'turn the headlmp switch .off7 the regular
lamps will g.0 off, arld:your he.adlanipS will change. to
the reduced brightness
of DRL.
Tcr: idle your vehicle with the.DRL off, set .the paking,
brake. The DRL will stay off until yab release- the
p.arking
brake,
As with any vehiclej yau:sho.uld turn on the regular
headla-mp. system. when ycwneed it.
2-44

Downloaded from www.Manualslib.com manuals search engine Fog Lamps (If Equipped)
Use your fog lamps for better &ion in foggy or misty
conditi.ons. Your parking lamps or low-beam headlamps
must be on for your fog lamps to. work.
The fog lamp switch is on tne Instrument panel under
the
lamp switches. Press the side of the. switch with the
fog lamp symbol to turn the fog lamps on. Press OFF to
turn them off. A light will glow in the switch when the
fog lamps are on.
Remember, fog lamps alone will not give off as much
light
.as your headlamps. Never use your fog lamps in
the dark without turning on your headlamps.
Fog lamps will go off whenever your high-beam
headlamps come
on. When the high-beam headlamps go
off, the fog lamps will come on agah.
Interior Lamps
Brightness Control
Turn the.switch next to the headlamp switch up to
make your ,instrument panel and transfer case lights
brighter. Turn the switch all the way up to. turn on the.
interior lamps.
2-45
. . . .

Downloaded from www.Manualslib.com manuals search engine Turn the INT LIGHTS dimer switc;h up until it clicks-
to tugn on the dome lamp.
Mirrors
Inside Daymight Rearview Mirror
Press the tab under the .mirror to .reduce glare ftom
headlamps behind you..
2-46

Downloaded from www.Manualslib.com manuals search engine Shift Light Check Gages Light.
SHIFT
You have the SHIFT light
if you have a manual
transmission. This light
comes- on very briefly as a
bulb check wh-en
you start
the engine. Shifting when
the indicator light is on will
help
you get the best fuel
economy. See “Shift Light”
in the Index.
Daytime Running Lamps Indicator Light
This light is ,on the
instrument panel. It goes on
whenever the
DIU are on,
the ignition is on, the
headlamp switch
is off
and the parking brake-
:::(-)
.ma is released.
CHECK
GAGES
The CHECK GAGES light
will come
on briefly when
y9u
are starting the engine.
If the light comes on and stays on while you are driving,
check
your coolant temperature and engine oil pressure
gages
to see if they are in the warning zones.
2-63

Downloaded from www.Manualslib.com manuals search engine Headlamps.
Sealed Be.am.L.amps
1. -Remove the screws from
the headlamp. retainer.
2. .Pull the headlamp o-ut
and remove fhc retainer.
3. Unplug and remove the headlamp.
4; Plugin the new headlamp and put it in place,
5. Put the retainex the headlamp and install and.
tighten the screws.
c--