
Downloaded from www.Manualslib.com manuals search engine 0 Section 3 Comfort  Controls  and  Audio  Systems 
In this section, you’ll  find out how  to  operate the comfort control  and audio systems  offered  with  your  Chevrolet. 
Be  sure to  read about  the particular systems supplied  with  your vehicle. 
3-2 
3-5 
3-5 
3-6  3-7 3-8 
3-8 
3-8 
3-8 
3- 10 
Comfort Controls 
Air  Conditioning 
Heating  Ventilation  System 
Defogging  and  Defrosting Windows 
Audio  Systems 
Setting the Clock  for Systems  without 
Automatic  Tone Control 
Setting the Clock  for Systems  with  Automatic 
Tone  Control 
AM-FM Stereo 
AM-FM  Stereo with Cassette  Tape Player  3-13 
3-17  3-21 
3-23 
3-23 
3-24 
3-25 
3-25  AM-FM 
Stereo with Cassette  Tape  Player  and 
Automatic  Tone Contro 
AM-FM  Stereo with  Compact  Disc Player  and 
Automatic  Tone  Control 
Theft-Deterrent Feature  Understanding  Radio Reception 
Tips  About  Your Audio  System 
Care 
of Your  Cassette  Tape  Player 
Care  of  Your  Compact  Discs 
Fixed  Mast Antenna   

Downloaded from www.Manualslib.com manuals search engine Comfort  Controls 
This  section  tells  you  how to make  your  air system  work 
for  you.  The optional  climate  control  system  with  air 
conditioning  uses  ozone-friendly 
R- 134a  refrigerant. 
With  these  systems,  you  can  control  the  ventilation  and  heating  in  your  vehicle.  Your vehicle  also  has  the 
flow-through  ventilation  system  described  later  in 
this  section. 
Fan Knob 
The  left  knob  selects  the  force of air you  want. 
Turn  the 
knob clockwise  to increase  fan speed  and 
counterclockwise  to decrease  fan speed. 
To turn  the  fan 
off,  turn  the mode  knob  all  the  way  counterclockwise. 
In  any  other  setting, the  fan  will  run  continuously. 
Temperature Knob 
The center knob changes  the  temperature  of the  air 
coming  through  the  system.  Turn  this knob  toward  red 
(clockwise)  for warmer  air.  Turn  it toward  blue 
(counterclockwise)  for cooler  air. 
Standard  Climate  Control  System 
Mode Knob 
The  right  knob  has  several  settings to control  the 
direction  of  airflow.  For  each setting, set  the  temperature 
to  a  comfortable  setting. 
2 VENT This  setting  brings  in  outside  air ana 
directs 
it through  the  middle  instrument  panel  outlets.   

Downloaded from www.Manualslib.com manuals search engine '!! BI-LEVEL: This setting  brings  in  outside  air and 
directs it  two  ways.  Some air is  directed  through  the 
instrument  panel  outlets.  Most  of the  air is  directed 
through  the  floor  ducts  and  a  little  to  the  defrost  and  side 
window  vents. 
'!! FLOOR: This  setting  sends most  of  the air through 
the  ducts  near  the 
floor. The rest  comes  out of  the 
defroster  and  side  window  vents. 
9 DEFOG: This  setting  allows  half  of the  air to go 
to  the  floor ducts and  half to the  defroster  and side 
window  vents. 
DEFROST This  setting  directs  most  of  the  air 
through  the  defroster  and  side window  vents.  Some of 
the air  goes to the  floor  ducts. 
Climate  Control  System  with Air 
Conditioning (If Equipped) 
Fan Knob 
The left knob selects  the force  of  air you  want. 
Turn the knob clockwise  to increase  fan  speed  and 
counterclockwise  to decrease  fan speed. 
To turn  the  fan 
off,  turn  the  mode  knob  all  the  way  counterclockwise. 
In 
any  other  setting,  the fan will  run  continuously.  The fan 
must  be  on 
to run  the  air  conditioning  compressor. 
3-3   

Downloaded from www.Manualslib.com manuals search engine Temperature  Knob 
The center knob changes  the  temperature of the air 
coming  through  the  system.  Turn  this knob  toward  red 
(clockwise)  for warmer  air.  Turn  it toward  blue 
(counterclockwise)  for cooler  air. 
Mode Knob 
The  right  knob  has  several  settings to control  the 
direction  of  airflow.  For  each setting, set  the  temperature 
to  a  comfortable  setting. 
0 MAX: This  setting  recirculates  much of the air 
inside  your  vehicle  and  sends  it  through  the  instrument 
panel  outlets.  The air  conditioning  compressor  will  run 
automatically  in  this  setting  when 
it is  needed to help 
cool  the  air  in  the  vehicle. 
2 VENT This  setting  brings  in  outside  air  and 
directs it  through  the  instrument  panel. 
'!! BI-LEVEL: This  setting  brings  in  outside  air and 
directs  it  two  ways.  Some air is  directed  through  the 
instrument  panel  outlets.  Most  of  the  air 
is directed 
through  the  floor ducts  and  a  little  to the  defrost  and  side 
window  vents. 
'!! FLOOR: This  setting  sends  most  of the  air through 
the  ducts  near  the  floor.  The rest  comes  out 
of the 
defroster  and  side window  vents. 
9 DEFOG: This  setting  allows  half  of  the  air  to go 
to  the  floor  ducts  and  half  to the  defroster  and side 
window  vents. 
DEFROST This  setting  direcrs  most of the  air 
through  the  defroster  and  side  window  vents.  Some 
of 
the air goes to the  floor ducts. The  air conditioning 
compressor  will  run  automatically  in this setting  when  it 
is  needed  to help  dry  ,the air in  the  vehicle. 
Air  Conditioning Compressor Button 
Press  the A/C button  to operate  the  air conditioner 
compressor.  The  indicator  light above  the  button  will 
glow  when  the  air conditioning  compressor  is  running. 
You  don't  have 
to press  the  button  to run  the  compressor 
in 
MAX or  DEFROST.   

Downloaded from www.Manualslib.com manuals search engine Air Conditioning (If Equipped) 
On  very  hot  days,  open  the  windows  long  enough to let  hot, 
inside 
air escape. This reduces  the  time  it  takes  for  your 
vehicle  to  cool  down,  which  should  help  fuel  economy. 
For  quick  cool-down  on  very  hot  days, use 
MAX with 
the  temperature knob  all the  way  in  the blue  area. 
If this 
setting is  used for long  periods 
of time,  the air in your 
vehicle  may  become  too dry. 
For  normal  cooling on  hot days, use 
VENT with the 
temperature knob  in the blue area  and the 
A/C button 
pushed  in.  The  system will  bring  in  outside air  and 
cool it. 
On  cool,  but  sunny  days, the sun  may  warm  your  upper 
body,  but your  lower  body  may  not  be  warm  enough. 
You  can use 
BI-LEVEL with  the temperature  knob  in 
the  middle  and  the  A/C  button  pushed 
in. The system 
will  bring 
in outside  air  and direct slightly  warmer  air  to 
your  lower  body.  You  may  notice this temperature 
difference  more  at some times  than others. 
Heating 
On cold  days,  use  FLOOR  with  the temperature knob all 
the  way  in  the  red  area.  The  system  will  bring  in  outside 
air,  heat  it  and  send  it 
to the floor  ducts. 
Your  vehicle  has  heat  ducts that are directed  toward 
the  rear seat.  Keep the area  under  the  front seats clear 
of  obstructions 
so the  heated  air  can reach  the  rear 
seat passengers. 
If  your  vehicle  has an engine coolant  heater,  you  can 
use 
it  to help  your  system provide  warm  air faster when  it’s 
cold  outside 
(0°F (-18°C) or lower).  An engine 
coolant  heater  warms  the  coolant your engine  and 
heating  system  use  to provide heat. See “Engine 
Coolant Heater”  in the  Index.   

Downloaded from www.Manualslib.com manuals search engine Ventilation Tips Ventilation System 
For  mild  outside  temperatures  when  little  heating or 
cooling  is  needed,  use 
VENT to  direct  outside  air 
through  your  vehicle.  Your  vehicle  also has  the 
flow-through  ventilation  system  described  later  in 
this  section. 
Your  vehicle's  flow-through  ventilation  system  supplies 
outside  air into the  vehicle  when  it  is  moving.  Outside 
air  will  also  enter  the  vehicle  when  the  air conditioning 
fan  is running. 
0 
0 
Keep  the  hood  and  front air inlet free of ice,  snow  or 
any  other  obstruction,  such 
as leaves. The heater and 
defroster  will  work  far better,  reducing  the  chance of 
fogging  the  inside  of  your  windows. 
When  you  enter  a  vehicle  in  cold  weather,  adjust  the  mode  knob 
to FLOOR and  the  fan to the  highest 
speed  for a  few  moments  before  driving  off.  This 
helps  clear the  intake  ducts  of 
snow and  moisture 
and  reduces  the  chance  of  fogging  the  inside 
of 
your  windows. 
Keep  the 
air path  under  the  front  seats  clear of objects. 
This helps air circulate  throughout your vehicle.   

Downloaded from www.Manualslib.com manuals search engine Driving  On  Grades 
NOTICE: 
Do not  tow  on  steep,  continuous  grades  exceeding 
6 miles (9.6 km). Extended,  higher  than  normal 
engine  and  transaxle  temperatures  may  result 
and  damage  your  vehicle.  Frequent  stops  are  very  important  to  allow  the  engine  and  transaxle 
to 
cool. 
Reduce  speed  and  shift  to a lower  gear before you start 
down  a  long  or  steep  downgrade.  If  you  don’t  shift 
down,  you  might  have  to use  your  brakes 
so much  that 
they  would  get  hot  and  no longer  work  well. 
On  a  long  uphill  grade,  shift  down and  reduce  your 
speed  to around 
45 mph (70 km/h) to reduce  the 
possibility  of engine  and  transaxle  overheating. 
Pay  particular  attention 
to the  engine  coolant  gage.  If the 
indicator is in  the  red  area, turn  off  the  air conditioning 
(if  you  have  this option) 
to reduce  engine  load (see 
“Engine  Overheating”  in the Index). 
Parking  on Hills 
You  really  should  not  park  your  vehicle,  with  a  trailer 
attached, 
on a  hill.  If  something goes wrong,  your  rig 
could  start  to move.  People  can be injured,  and  both 
your  vehicle 
and the  trailer  can  be  damaged. 
But 
if you  ever  have  to park  your  rig  on  a  hill, here’s 
how 
to do  it: 
1. 
2. 
3. 
4. 
5. 
Apply  your  regular  brakes,  but  don’t  shift  into 
PARK  (P) yet. 
Have  someone  place  chocks  under  the  trailer  wheels. 
When 
the wheel  chocks  are in place,  release  the 
regular  brakes  until  the  chocks  absorb  the  load. 
Reapply  the  regular  brakes.  Then  apply  your  parking 
brake,  and  then  shift 
to PARK  (P). 
Release  the  regular  brakes.   

Downloaded from www.Manualslib.com manuals search engine Section 6 Service and Appearance  Care 
Here you will find information about the care  of your  Chevrolet. This section begins  with service and fuel 
information, and then  it shows  how to check important fluid  and lubricant levels. There is also technical information 
about  your vehicle,  and a part devoted  to its appearance care. 
6-3 
6-6 
6-8 
6-12 
6-17 
6-18 
6-2 
1 
6-22 
6-24 
6-25 
6-28  Fuel 
Filling 
Your  Tank 
Checking Things Under  the Hood 
Engine Oil 
Air  Cleaner 
Automatic Transaxle Fluid 
(Except 2.4L Code T Engine) 
Automatic Transaxle  Fluid 
(2.4L Code  T Engine Only) 
Manual Transaxle  Fluid 
Hydraulic Clutch 
Engine Coolant  Surge  Tank Pressure Cap  6-29 
6-30 
6-3 
1 
6-35 
6-35 
6-40 
6-52 
6-55 
6-56 
6-56 
6-58 
6-58 
6-64 Power Steering Fluid 
Windshield  Washer  Fluid 
Brakes 
Battery 
Halogen Bulbs  Tires 
Care  of Safety Belts 
Cleaning Tires 
Finish Damage  Underbody Maintenance  Service Parts Identification  Label 
Electrical System  Air Conditioning Refrigerants