1997 CHEVROLET CAMARO wiper blades

Downloaded from www.Manualslib.com manuals search engine You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band
to choose the delay time. The
closer to
LO, the shorter the delay.
For steady wiping at low speed, turn the band away
from you to the
LO position. For high-speed wiping,
turn the band further,
to HI. To stop the wipers, move
the band to
OFF.
Damaged wiper blades may prevent you from seeing
well enough to drive safely.
To avoid damage, be sure to
clear ice and snow from the wiper blades before using
them. If they’re frozen to the windshield, carefully
loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wipers.
A circuit
breaker will stop them until the motor cools. Clear away
snow or ice
to prevent an overload.
Windshield Washer
At the top of the turn signal/multifunction lever, there’s
a paddle with the word PUSH on it. To spray washer
fluid on
the windshield, just push the paddle. The
washer
will continue to spray until you release the
paddle for less
than a second. The wipers will clear the
window and wipe a few more times before stopping or
returning to the previous setting.
In freezing weather, don’t use your washer until
the windshield is warmed. Otherwise the washer
fluid can form ice
on the windshield. blockine
your vision.
2-47

Downloaded from www.Manualslib.com manuals search engine Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet
road, you can’t stop, accelerate or turn as well because
your tire-to-road traction isn’t as good as on
dry roads.
And, if your tires don’t have much tread left, you’ll get
even less traction. It’s always wise to go slower and be
cautious if rain starts
to fall while you are driving. The
surface may get wet suddenly when your reflexes are
tuned for driving on dry pavement.
The heavier the rain, the harder it is to
see. Even if your
windshield wiper blades
are in good shape, a heavy rain
can make it harder to see road signs and traffic signals,
pavement markings, the edge of
the road and even
people walking.
It’s wise to keep your windshield wiping equipment in
good shape and keep your windshield washer tank filled
with washer fluid. Replace your windshield wiper
inserts when they show signs of streaking or missing
areas on the windshield,
or when strips of rubber start
to separate from the
inserts.
4-18

Downloaded from www.Manualslib.com manuals search engine The exit speed is usually posted.
Reduce your speed according to your speedometer, not
to your sense
of motion. After driving for any distance
at higher speeds, you may tend to think you are going
slower than you actually are.
Before Leaving on a Long Trip
Make sure you’re ready. Try to be well rested. If you
must start when you’re not fresh
-- such as after a day’s
work
-- don’t plan to make too many miles that first part
of the journey. Wear comfortable clothing and shoes you
can easily drive in.
Is your vehicle ready for a long trip? If you keep it
serviced and maintained, it’s ready to go. If it needs
service, have it done before starting out.
Of course,
you’ll find experienced and able service experts in
Chevrolet dealerships all across North America. They’ll
be ready and willing to help if you need it. Here
are some things you can check before a trip:
0
0
0
0
0
0
0
Windshield Washer Fluid: Is the reservoir full? Are
all windows clean inside and outside?
Wiper Blades: Are they in good shape?
Fuel, Engine Oil, Other Fluids: Have you checked
all levels?
Lamps: Are they all working? Are the lenses clean?
Tires: They are vitally important to a safe,
trouble-free trip. Is the tread good enough for
long-distance driving? Are the tires all inflated to
the recommended pressure?
Weather Forecasts: What’s the weather outlook
along your route? Should you delay your trip a short time to avoid a major storm system?
Maps: Do you have up-to-date maps?
4-23

Downloaded from www.Manualslib.com manuals search engine Wiper Blade Assembly Replacement Wiper Blade Element Replacement
Replacement blades
come in different types and are
removed in different ways.
To remove the wiper blade assembly:
1. Lift the wiper arm until it locks into an upright position.
2. Press the locking tab down while sliding the blade
assembly down.
To replace the wiper blade element, refer to the wiper
blade assembly replacement instructions.
To replace the
element, follow these steps:
1. Locate the heel end of the wiper blade assembly that
has the two notches held by
the wiper blade claw.
2. Hold the wiper blade assembly with one hand and
pull the element gently with the other hand. (Replacement blade elements have three plastic caps
which retain two metal flexor strips.
Do not remove
these caps before the element is installed).
6-49

Downloaded from www.Manualslib.com manuals search engine Cleaning the Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to
see through the windshield
under certain conditions.
Care of Safety Belts
Keep belts clean and dry.
Do not bleach or dye safety belts. If you do, it
may severely weaken them.
In a crash, they
might not be able
to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
Glass
Glass should be cleaned often. GM Glass Cleaner (GM
Part No. 1050427) or a liquid household glass cleaner
will remove normal tobacco smoke and dust films on
interior glass. Don’t
use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals
on the inside rear
window, since they may have to be scraped off later. If
abrasive cleaners are used
on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.
Cleaning the Outside of the
Windshield and Wiper Blades
If the windshield is not clear after using the windshield
washer, or if the wiper blade chatters when running,
wax, sap or other material may be
on the blade
or windshield.
Clean the outside of the windshield with GM Windshield
Cleaner, Bon Ami@ Powder (non-scratching glass
cleaning powder),
GM Part No. 10500 1 1. The
windshield is clean if beads do not form when you
rinse it with water.
Grime from the windshield will stick to the wiper blades
and affect their performance. Clean the blade by wiping
vigorously with a cloth soaked in full-strength windshield
washer solvent. Then rinse the blade with water.
Check the wiper blades and clean them as necessary;
replace blades that look worn.
6-62

Downloaded from www.Manualslib.com manuals search engine At Least Twice a Year
Restraint System Check
Make sure the safety belt reminder light and all your
belts, buckles, latch plates, retractors and anchorages are
working properly. Look for any other
loose or damaged
safety belt system parts.
If you see anything that might
keep a safety belt system from doing its job, have it
repaired. Have any torn or frayed safety belts replaced.
Also look for any opened or broken air bag covers, and
have them repaired or replaced. (The air bag system
does not
need regular maintenance.)
Wiper Blade Check
Inspect wiper blades for wear or cracking. Replace blade
inserts that appear worn or damaged or that streak or
miss areas
of the windshield. Also see “Wiper Blades,
Cleaning” in the Index.
Manual Transmission Check
Check the transmission fluid level; add if needed.
See “Manual Transmission’’ in the Index.
A fluid
loss may indicate a problem. Have the system inspected
and repaired
if needed.
Automatic Transmission Check
Check the transmission fluid level; add if needed. See
“Automatic Transmission” in the Index.
A fluid loss
may indicate
a problem. Check the system and repair
if needed.
Hydraulic Clutch System Check
Check the fluid level in the clutch reservoir. See
“Hydraulic Clutch Fluid” in the Index.
A fluid loss in
this system could indicate a problem. Have the system
inspected and repaired
at once.
At Least Once a Year
Key Lock Cylinders Service
Lubricate the key lock cylinders with the lubricant
specified in Part
D.
Body Lubrication Service
Lubricate all hinges and latches, including those for the
hood, rear compartment, console doors and any folding
seat hardware. Part
D tells you what to use. More
frequent lubrication may be required when exposed to a
corrosive environment.
7-44

Downloaded from www.Manualslib.com manuals search engine Better Business Bureau Mediation ................... 8-9
Blizzard
...................................... 4-28
Brake Adjustment
.................................. 6-38
Fluid
....................................... 6-35
Master Cylinder
.............................. 6-35
PedalTravel
................................. 6-38
Parking
..................................... 2-38
Replacing System Parts
........................ 6-39
System Warning Light
......................... 2-79
Trailer
...................................... 4-36
Transmission Shift Interlock
.................... 2-4 1
Wear ....................................... 6-37
Brakes. Anti-Lock
............................... 4-7
Braking
........................................ 4-6
Braking in Emergencies
.......................... 4- 10
Break-In.
New Vehicle .......................... 2-23
Brightness Control
.............................. 2-54
BTSICheck
................................... 7-45
Bulb Replacement
.............................. 6-40
Canadian Roadside Assistance
.................... 8-7
Capacities and Specifications
...................... 6-74
Carbon Monoxide
.......... 2-1 1.2-42.2-43.4-29. 4-36
Care
of Your Cassette Player ...................... 3-23
Care of Your Compact Disc Player
................. 3-24
Cassette Deck Service
........................... 7-43
Cassette Storage
................................ 2-59
Cassette Tape Player
......................... 3-6. 3-9
Cassette Tape Player Care
........................ 3-23
CD Player Theft-Deterrent Feature ................. 3-20
Center High-Mounted Stoplamp Bulb Replacement
.... 6-46
BTSI ......................................... 2-41 Certification Label
.............................. 4-3
1
Chains. Safety
................................. 4-36
Chains. Tire
................................... 6-58
Changing a Flat Tire
............................. 5-29
Check Gages Light .............................. 2-88
Checking Your Restraint Systems
.................. 1-40
Chemical Paint Spotting
.......................... 6-66
Child Restraints
................................ 1-31
Securing
in a Rear Seat Position ................. 1-33
Securing
in the Right Front Seat Position .......... 1-35
Where to Put
................................ 1-31
Cigarette Lighter
............................... 2-60
Circuit Breakers and Fuses
....................... 6-69
Cleaner. Air
................................... 6-18
Cleaning Aluminum Wheels
............................ 6-65
Convertible Top
.............................. 6-64
Fabric
...................................... 6-59
Glass
....................................... 6-62
Inside
of Your Chevrolet ....................... 6-59
Instrument Panel
............................. 6-62
Leather
..................................... 6-61
Outside
of Your Chevrolet ...................... 6-63
Removable Roof Panel
......................... 6-63
Special Problems
............................. 6-60
Stains
...................................... 6-60
Tires
....................................... 6-65
Vinyl
....................................... 6-61
Wheels
..................................... 6-65
Windshield and Wiper Blades
................... 6-62
Climate Control System
........................... 3-2
Clock. Setting the
................................ 3-6
TopStrap
................................... 1-32
9-2