01-164
Output Diagnostic Test Mode (DTM)
-
EDL valves/ Hydr-P : B+ Wheel fl/fr lock
Indicated on display: Only significant for troubleshooting on
vehicles with EDL, starting with production deadline of calendar
week 21/1997. For these vehicles, the test step was modified in
parallel to implementation of EBD emergency mode. Prior to
production deadline of calendar week 21/1997, the hydraulic pump is
not activated. This test step does not apply to vehicles without EDL.
The vehicle version, as relates to EBD, can be recognized by checking
the note column under "Check control module version"; page 01
-128
.
The EDL change-over valve (left) and the EDL inlet valve are activated.
ABS return flow pump -V39- runs for one second. It draws brake fluid from
the brake fluid expansion tank via the EDL inlet valve. The hydraulic pump
builds brake fluid pressure in the EDL regulated wheel cylinders. These
wheels will then be locked.
If not, this indicates a mechanical malfunction in one of the valves,
providing there is no electrical malfunction in the system. Replace
hydraulic control unit.
This test step cannot be performed on vehicles that are not equipped with
EDL. These vehicles lack the EDL valves and the pressure relief valve.
Pa
ge 18 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13
