35-2
Notes:
When installing the input shaft or new gears,
consult technical data Page 00
-3 .
By replacing items - 2 -, - 4 - and/or - 6 -, the
position of the ball bearing is influenced. In this
case, the input shaft must be re-adjusted
Page 35
-17
.
1 -
Circlip
IdentificationInstalled position Fig. 15
, item -1-
Determining thickness Page 35
-17
2 -
Input shaft ball bearing
Removing and installing Page 34
-49
3 -
Circlip
IdentificationInstalled position Fig. 15
, item -2-
Determining thickness Page 35
-17
4 -
Transmission housing
Pa
ge 3 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1
35-5
18 -
Needle bearing for 4th gear
Identification
19 -
5th gear Pressing off Fig. 11Pressing on Fig. 19
20 -
Circlip
IdentificationInstalled position Fig. 15
, item -5-
If 5th gear is replaced, re-determine
thickness of circlip Fig. 16
21 -
Roller sleeve
Always replaceDamaged when removedPulling out Fig. 8Installed position Fig. 9Driving in Fig. 10
22 -
Plastic sleeve
Made of plastic
23 -
Transmission cover With reverse idler gear Page 35
-44Pa
ge 7 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1
