35-7
Notes:
To avoid damage due to improper assembly, check the following after
replacing the input shaft: Fig. 3 Allocation of input shaft/needle bearingInput shaft diameter
Needle bearing part number
a: 27 mm (1.062 in.) 012 311 123 D
a: 29 mm (1.141 in) 012 311 123
Input shaft must be able to be guided in.Input shaft must have no play.
Dimension -a- from lower edge of straight-edge to upper edge of needle
bearing: 39.5 mm (1.555 in.)
Note:
Measure the dimension from the top edge of the straight-edge and
subtract the height of the straight-edge from the measured dimension. Fig. 4 Allocation of needle bearing
Pa
ge 10 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1
