34-41
Input shaft ball bearing and multi-function
switch, removing and installing
1 -
Transmission housing
With differential and flange shaftsRemoving and installing flange shafts
Page 39
-1
Removing and installing differential
Page 39
-10
Removing and installing speedometer
Vehicle Speed Sensor (VSS) Page 39
-7
Removing and installing speedometer drive
gear Page 39
-7
Breather installation position Fig. 1
2 -
Torx bolt
Always replace35 Nm (26 ft lb)Self-locking
3 -
Guide sleeve Installed with O-ring and seal for input shaft
Page 30
-17
4 -
Dished washer
Smaller diameter (convex side) faces guide
Pa
ge 4 of 26 Transmission, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.4
