1997 AUDI A4 01V Transmission Torque Tube Assembly Workshop Manual

39-110


Note:
The bearing is damaged during removal.
Only if the diaphragm plate is damaged: - Pulling out grooved ball bearing for drive flange.
A - Internal puller 30 to 37 mm, e.g. Kukko 21/5 extractor
- If the diaphragm plate is damaged, press it out together with drive
flange.

- To install, drive in diaphragm plate -A- up to stop.
Pa
ge 9 of 11 Tor
que tube, disassemblin
g, assemblin
g and overview
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.8

39-111

Assembly

- Press grooved ball bearing into torque tube.
- Insert outer circlip.
- Fill seal between sealing lip and dust lip with multi-purpose grease.

- Drive in seal to stop.
Pa
ge 10 of 11 Tor
que tube, disassemblin
g, assemblin
g and overview
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.8

39-112


- Insert circlip into torque tube and hold using pliers, press in drive
flange.
- Insert circlip into groove.

- Press sleeve onto drive flange up to stop.
- Install cap with seal.
- Insert circlip.
- Install final drive mount.
- Position O-ring on torque tube.
Pa
ge 11 of 11 Tor
que tube, disassemblin
g, assemblin
g and overview
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.8