Downloaded from www.Manualslib.com manuals search engine 40-78
1 - Triple-rotor joint housing
2 - Triple-rotor star
3 - Axle shaft
Note:
CAUTION!
Do not let the rollers slide off the triple-rotor star
and fall to the floor. - Remove O-ring -arrow- from groove. - Mark installation positions of parts -1-, -2- and -3-. Noises while driving may result if the indicated
parts are not reassembled to their prior positions. Use a waterproof felt-tipped pen for marking
parts.
- Remove rubber gasket (arrow) from groove. - With triple-rotor joint housing clamped in vise, pull
axle shaft together with triple-rotor star upward out
of housing.
- Hold axle shaft in straight alignment to triple-rotor
joint and slowly push back triple-rotor joint housing
with other hand. - Mark installation position of rollers -1- on triple-
rotor star -2- using felt-tipped marker. Page 78 of 82Front Wheel Suspension, Shafts and Axle12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1
