1996 VOLKSWAGEN PASSAT Oil pump

Downloaded from www.Manualslib.com manuals search engine 45-14

-
Remove Torx socket-head bolts (T25) from
ABS hydraulic unit bracket.
- Remove ABS hydraulic unit/ABS control module
assembly.

- Disconnect ABS hydraulic pump connector from
ABS control module. CAUTION! - Remove ABS control module mounting bolts
(arrows) and pull off ABS control module. Pull control module straight off. Do not tilt. Cover control unit magnetic coils with a lint-
free cloth. After separating the ABS hydraulic unit and
ABS control module, always use the plastic
foam valve dome transportation protection
Page 45-11 . Page 6 of 9ABS, ABS/EDL hydraulic unit, vacuum brake booster and brake master cylinder (Teves 20 GI), servicing12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.45.3

Downloaded from www.Manualslib.com manuals search engine 48-16

Removing - Press tie rods off steering arm. A - Ball joint splitter (commercial type) e.g. Kukko
No. 128/2
- Remove partition behind pedals from bulkhead
and from steering column tube to loosen the
universal joint/power steering gear. If an oil extraction unit is not available, disconnect
vane pump supply hose and drain hydraulic fluid. - Loosen nut on the universal joint (arrow). - Remove hydraulic fluid from reservoir with an oil
extraction unit, e.g. VAG 1358 A or VAG 1307 A. Page 16 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Downloaded from www.Manualslib.com manuals search engine 48-85

Assembly overview: vane pump,
reservoir and hydraulic lines (vehicles
with 4-Cyl. engines)
It is not intended that repair work be carried out
on the vane pump. If complaints are received
determine cause with the help of pressure and
leakage tests. Replace pump if faulty.

Note:
Pumps supplied as spare parts are not filled
with oil. Fill the pump with G 002 000 hydraulic
oil to rotate it by hand, otherwise the pump may
be damaged or noisy during operation.
Type of oil: hydraulic oil G 002 000 Oil system capacity: 0.7 - 0.9 Itr. (0.74 - 0.95
qt.)
Do not reuse drained hydraulic oil. Always replace O-rings. Page 85 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Downloaded from www.Manualslib.com manuals search engine 48-90

Power steering vane
pump, removing and
installing (vehicles with 4-
Cyl. engines)
Note: Always replace self-locking
nuts and bolts. Pumps supplied as spare
parts are not filled with
hydraulic oil. Fill the pump with G 002 000 hydraulic oil and rotate it by hand, otherwise the pump may be damaged or noisy during
operation. Do not reuse drained
hydraulic oil.
1 - Suction hose
2 - Pressure hose
3 - Hose clamp
4 - Tensioning bolt Tensioning V-belts
item 11 Page 90 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Downloaded from www.Manualslib.com manuals search engine 48-97

Power steering vane
pump, removing and
installing (vehicles with
VR6 engine]
Note: Always replace seals. Do not reuse drained
hydraulic oil. Pumps supplied as spare
parts are not filled with oil.
Fill the pump with G 002
000 hydraulic oil and rotate
it by hand, otherwise the
pump may be damaged or
noisy during operation.
1 - Suction hose A cooling line is installed between vane pump suction hose
and reservoir
2 - Hose clamp Page 97 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1