1996 TOYOTA T100 odometer

Downloaded from www.Manualslib.com manuals search engine DI0XH−01
Supplemental Restraint System Check Sheet
Date Problem Dist Occurred
Customer ’s Name
Registration No.
Registration Year
Frame No.
Odometer Reading
Weather
Temperature
Vehicle Operation
Road Conditions
Details of Problem
Vehicle Inspection, Repair
History Prior to Occurrence of
Malfunction (Including
Supplemental Restraint System)
Diagnosis System Inspection
SRS Warning Light
Inspection
DTC Inspection1st Time
2nd Time
1st Time
2nd TimeInspector ’s
Name
Fine Cloudy Rainy Snowy Other
Approx.
Starting Idling
Driving [ Constant speed Acceleration Deceleration
Other ]
Remains ON Sometimes Lights Up Does Not Light Up
Remains ON Sometimes Lights Up
Does Not Light Up
Normal Code Malfunction Code
Normal Code Malfunction Code[ Code. ]
[ Code. ]km
Miles //
//
// Date Vehicle Brought In DI−364
− DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1996 TOYOTA T100 (RM449U)
CUSTOMER PROBLEM ANALYSIS CHECK

Downloaded from www.Manualslib.com manuals search engine DI34U−02
CRUISE CONTROL SYSTEM Check Sheet
Inspector ’s name:
Customer ’s Name
Date of VehicleRegistration No.
Registration Year
Frame No.
Odometer Reading / /km
Mile
Condition of
Problem Occurrence
Date of Problem
How Often does
Occurrence
Problem Occur?
Vehicle Speed when
Problem Occurred / /
Continuous Intermittent ( Times a day)
km
Mile Brought in
Auto cancel
occurs Driving condition
 City driving  Freeway  Up hill  Down hill
 After cancel occurred, did the driver activate cruise control
again?
 Yes  No
 Cancel does not
occur With brake ON
 Except D position shift  At 40 km/h (25 mph) or less
 When control SW turns to CANCEL position
 Cruise control
malfunction Slip to acceleration side
 Slip to deceleration side
 Hunting occurs
 O/D cut off does not occur
 O/D does not return
 Switch
malfunction SET  ACCEL  COAST  RESUME  CANCEL
 Remains ON  Does not light up  Blinking Symptoms
DTC Check1st Time2nd Time
 Normal Code  Malfunction Code (Code )
 Normal Code  Malfunction Code (Code )  Cruise MAIN
indicator light
− DIAGNOSTICSCRUISE CONTROL SYSTEM
DI−409
1996 TOYOTA T100 (RM449U)
CUSTOMER PROBLEM ANALYSIS CHECK

Downloaded from www.Manualslib.com manuals search engine BE03F−03
Z09689
A w/ Tachometer
w/o Tachometer
A B
B BE−38
− BODY ELECTRICALCOMBINATION METER
1996 TOYOTA T100 (RM449U)
INSPECTION
1. INSPECT SPEEDOMETER ON−VEHICLE
(a) Using a speedometer tester, inspect the speedometer for
allowable indication error and check the operation of the
odometer.
HINT:
Tire wear and tire over or under inflation will increase the indica-
tion error.
If error is excessive, replace the speedometer.
(b) Check the speedometer for pointer vibration and abnor-
mal noise.
USA (mph)CANADA (km/h)
Standard indication Allowable rangeStandard indication Allowable range
20 18 − 24 20 17 − 24
40 38 − 44 40 38 − 46
60 58 − 66 60 57.5 − 67
80 78 − 88 80 77 − 88
100 98 − 11 0 100 96 − 109
120 118 − 132 120 115 − 130
140 134 − 151.5
160 153 − 173
2. INSPECT VEHICLE SPEED SENSOR OPERATION
Check that there is continuity between terminals A and B four
times for every revolution of the speedometer shaft.
If operation is not as specified, replace the speedometer.