1996 TOYOTA T100 air conditioning

Downloaded from www.Manualslib.com manuals search engine AC0G4−01
AC−64
− AIR CONDITIONINGWATER VALVE
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page AC−63).

Downloaded from www.Manualslib.com manuals search engine N05818
AC0G5−01
− AIR CONDITIONINGBLOWER MOTOR
AC−65
1999 Author: Date:
1996 TOYOTA T100 (RM449U)
BLOWER MOTOR
REMOVAL
REMOVE BLOWER MOTOR
(a) Disconnect the connector.
(b) Remove the 3 screws and blower motor.

Downloaded from www.Manualslib.com manuals search engine AC0G6−01
I02318
1
2
AC−66
− AIR CONDITIONINGBLOWER MOTOR
1996 TOYOTA T100 (RM449U)
INSPECTION
INSPECT BLOWER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 1 and
the negative (−) lead to terminal 2, then check that the motor op-
erations smoothly.
If operation is not as specified, replace the blower motor.

Downloaded from www.Manualslib.com manuals search engine AC0G7−01
− AIR CONDITIONINGBLOWER MOTOR
AC−67
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page AC−65).

Downloaded from www.Manualslib.com manuals search engine N05817
AC0G8−01
AC−68
− AIR CONDITIONINGBLOWER RESISTOR
2002 Author: Date:
1996 TOYOTA T100 (RM449U)
BLOWER RESISTOR
REMOVAL
REMOVE BLOWER RESISTOR
(a) Disconnect the connector.
(b) Remove the 2 screws and blower resistor.

Downloaded from www.Manualslib.com manuals search engine AC0G9−01
N09039
1 2
3 4
− AIR CONDITIONINGBLOWER RESISTOR
AC−69
1996 TOYOTA T100 (RM449U)
INSPECTION
INSPECT BLOWER RESISTOR RESISTANCE
Tester connectionConditionSpecified condition
1 − 2 − 3 − 4ConstantContinuity
If continuity is not as specified, replace the blower resistor.

Downloaded from www.Manualslib.com manuals search engine AC0GA−01
AC−70
− AIR CONDITIONINGBLOWER RESISTOR
1996 TOYOTA T100 (RM449U)
INSTALLATION
Installation is in the reverse order of removal (See page AC−68).

Downloaded from www.Manualslib.com manuals search engine AC0GB−01
Z04351
Connector
3 2
1
4
− AIR CONDITIONINGTHERMISTOR
AC−71
2005 Author: Date:
1996 TOYOTA T100 (RM449U)
THERMISTOR
ON−VEHICLE INSPECTION
1. REMOVE GLOVE COMPARTMENT DOOR
(See page BO−36)
2. INSPECT THERMISTOR RESISTANCE
(a) Disconnect the connector
(b) Measure resistance between terminals 2 and 4.
Standard resistance: 1,500 Ω at 25 °C (77°F)
If resistance is not as specified, proceed next inspection.