1996 TOYOTA SUPRA fog light

Part 1Headlights and turn signals
43
OPERATION OF INSTRUMENTS AND CONTROLSÐ
Chapter 1-4
Lights, Wipers and Defogger
Headlights and turn signals
Emergency flashers
Instrument panel light control
Front fog lights
Interior lights
Ignition switch light
Luggage compartment light
Windshield wipers and washer
Rear window wiper and washer
Rear window and outside rear view mirror defoggers
To turn the lights on, twist the knob on
the end of the lever.
Daytime running light system (Canada
only)ÐThe headlights turn on when the
parking brake is released with the engine
started, even with the light switch in the
OFFº position. They will not go off until
the ignition switch is turned off.
To turn on the other exterior lights and in-
strument
panel lights, twist the knob to the
first clickstop.
Under the daytime running light system,
the headlights turn on at reduced intensi-
ty. Twist the knob to the second clickstop to turn to full intensity for driving at night. FIRST CLICKSTOP: Only the parking,
tail, license plate, side marker and instru-
ment panel lights turn on.
SECOND CLICKSTOP: The headlights
also turn on.
The lights automatically turn off when the
driver's door is opened with the ignition
key turned off. To turn them on again, turn the key to the ONº position or actuate the
headlight switch. If you are going to park
for over one week, make sure the head-
light switch is off.NOTICE
To prevent the battery from being discharged, do not leave the lights
on for a long period when the engine is not running.

45
To adjust the brightness of the instru-
ment panel lights, turn the knob.To turn on the front fog lights, twist the
knob of the headlight and turn signal
switch lever. They will come on when
the headlights are turned on lowbeam.To turn on the interior light, push the switch.
With the central switch pushed on the
DOORº side, both lights come on wheneither of the side doors is opened. The lights remain on for a certain time after both doors are closed.
Instrument panel light control Front fog lights Interior lights

47
If the washer does not work, check to see
whether the washer tank is empty. For in-
formation on adding washer fluid, see
Adding washer fluidº in Chapter 7-3.
In cold weather, warm the windshield with
the defroster before using the washer.
This will help prevent icing, which could
block your vision.
NOTICE
Do not operate the wipers if the windshield is dry. It may scratch the
glass.
To turn the rear wiper and washer on,
twist the knob at the end of the lever. The key must be in the ONº position.
The wiper will operate at intervals when the knob is in the INTº position.
The washer squirts at the two marked
knob positions. The knob will automatical-
ly return from these positions when it is re- leased.
If the washer does not work, check to see
whether the washer tank is empty. For in-
formation on adding washer fluid, see
Adding washer fluidº in Chapter 7-3.
NOTICE
Do not operate the rear wiper if the rear window is dry. It may scratch
the glass.
To defog or defrost the rear window,
push the switch. The key must be in the ONº position.
The thin heater wires on the inside of the rear window will quickly clear the window
surface. An indicator light will illuminate to
indicate the defogger is operating.
On some models, the heater panels in the
outside rear view mirrors will also quickly
clear the surfaces. Keep you hands off the
mirror faces when the switch is on. Push the switch once again to turn the de-
foggers off.
The system will automatically shut off af-
ter the defoggers have operated about 15minutes.
Rear window w
iper and washer Rear window and outside rear view mirror defoggers

99
The automatic air conditioning is an air
conditioning that automatically maintains the set temperature.
This air conditioning features automatic
air intake controls, fan speed and air flow controls which automatically select the
most suitable air intake control, fan speed
and air flow to control the temperature.
You may use manual controls if you desire your own way of setting.
(A) CLIMATE CONTROL Setting operation
1. Turn the temperature control knob at the desired temperature level.
The temperature control knob is used to
set the desired passenger compartment
temperature. The tem
perature of air deliv-
ered to the passenger compartment will
be controlled automatically according to
the setting. The figures on the panel indi-
cate degrees in centigrade or Fahrenheit. 2. Press in the AUTOº button.
As the AUTOº button is pressed in, the fan turns on and operates with the most
suitable air intake control, air flow (except
pressing the FLOOR/WINDSHIELD or
WINDSHIELD button) and fan speed se-lected
automatically according to the tem-
perature. In cold weather, however, the
fan will not operate until the engine cool-
ant warms up sufficiently.
3. If any of the AUTOº button functions is not necessary for your own way of set-
ting, manual control can be made on each
of the functions, leaving the rest of the
functions in operation. Operate the con-
trols as described in Manual control on air
intake, air flow and fan speedº after the
AUTOº button is pressed in.
4. Press in the air conditioning on-off but-
ton.
The air conditioning on-off button is used
to turn on and off the air conditioning.
With the button pressed in the on mode, the air conditioning turns on.
If the system is used for ventilation or
heating in dry weather, press the air con-
ditioning on-off button once again. This
turns off the air conditioning. For year-
round automatic temperature control in-
cluding cooling and dehumidifying opera-
tion, use the air conditioning. 5. Press in the OFFº button turn off thefan speed and temperature control.
Manual control on air intake, air flow
and fan speed
If manual air intake control is de- siredÐ
The air intake control button is used to se-
lect intake air, either outside air or recircu-
lated air. With the button in the OUTSIDE
AIR mode, the OUTSIDE AIR mode indi-
cator light w
ill come on and the system will
take fresh outside air into the unit.
If quick circulation of conditioned air is de- sired, press in the air intake control button
to select the RECIRCULATED AIR mode
for recirculated air. The RECIRCULATED
AIR mode indicator light will come on.
For normal use, it is best to keep the air in-
take control button for outside air. If recir-
culated air is used during heating, the win-
dows will fog up more easily.
If manual air flow selection is de- siredÐ
The air flow outlets from which air is deliv-
ered can be selected manually by press-
ing in the appropriate air flow control but-
ton. The function of each button is as follows:
FACE buttonÐThis button directs the air flow to face level.

100BI-LEVEL buttonÐThis button directs
the air flow to face level and the floor. Ex-
cept in ventilation, the air to the floor is
slightly warmer than that to face level.
FLOOR buttonÐThis button directs the
air flow mostly to the floor.
FLOOR/WINDSHIELD buttonÐThis but- ton directs the air flow to the windshield
and front side windows as well as the floor.
WINDSHIELD buttonÐThis button di-
rects the air flow to the windshield and
front side windows.
Pressing this air flow control button turns
on the air conditioning. This is to clear up
the front view more quickly.
Pressing the air conditioning on-off but-
ton in the off mode turns off the air condi- tioning.
If you push the WINDSHIELD button once
again, it returns to the last air flow button used. Do not use the WINDSHIELD button dur-
ing cooling operation in extremely humid
weather.
The difference between the tem-
perature of the outside air and that of the windshield could cause the outer surface
of the windshield to fog up blocking yourvision. If manual fan speed control is de- siredÐ
The fan speed can be fixed at your desired
speed by turning to the appropriate posi-tion of the fan speed control knob. The
higher
the fan speed is, the more air is de-
livered.
(B) WINDSHIELD DEFOGGING AND DEFROSTING
See (A) CLIMATE CONTROLº for details
on each button or lever function.
To remove interior fog on the wind- shieldÐ
1. Turn the temperature control knob for the desired temperature level.
2. Press in the AUTOº button.
3. Set the air intake control button to the OUTSIDE AIR mode.
4. Press in the WINDSHIELD button of the air flow control buttons.
To remove frost or exterior fog on the windshieldÐ
1. Turn the temperature control knob at the maximum temperature.
2. Set the air intake control button to the OUTSIDE AIR mode.
3. Press in the WINDSHIELD button of the air flow control buttons.
4. Turn the fan speed control knob at the
HIº position. 5. Press the air conditioning on-off but- ton in the OFF mode.
(C) OPERATING TIPS
Be sure the air inlet grilles in front of the
windshield are not blocked by leaves or other obstructions.
If air flow control is not satisfactory,
check the dashboard vents. (See
Dashboard ventsº or Lower ventº.)
To help cool down the interior after
parking in the hot sun, drive for the first
few minutes with the windows open.
After the excess heat has blown away,
close the windows.
When driving on dusty roads, close all
windows. If dust thrown up by the ve-
hicle is still drawn into the vehicle after
closing the windows, it is recom-
mended that the air intake control but-ton be set in the OUTSIDE AIR mode.
If following another vehicle on a dusty
road, or driving in windy and dusty con-
ditions, it is recommended that the air
intake control button be temporarily
set to select the RECIRCULATED AIR
mode, which will close off the outside
passage and prevent outside air and
dust from entering the vehicle interior.

169
To check the headlight aim, check the vertical and horizontal gauges.
1. Look at the beam angle gauge (vertical
movement). The bubble of the gauge
should not deviate from the center of the gauge by more than two marks on either side of the gauge.2. Look at the beam angle gauge (hori- zontal movement). The 0º mark should
not deviate by more than one mark on ei-
ther side of the gauge.
If the error is over the value specified
above, take the vehicle to your Toyota
dealer to adjust the headlight aim. The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the wattage ratings given in the table.
Halogen bulbs have pressurized
gas inside and require special han-
dling. They can burst or shatter ifscratched or dropped. Hold a bulb
only by its plastic or metal case. Do
not touch the glass part of a bulb
with bare hands.
CAUTION
!
NOTICE
Only use a bulb of the listed type.
Light BulbsBulb No.WType
Headlights (low beam)900655A
Headlights (high beam)900565B
Front fog lightsÐ55C
Parking lightsÐ5E
Front turn signal lights115627D
Front side marker lights1943.8E
Rear side marker lights1943.8E
Rear turn signal lights115627D
Replacing light bulbsÐ

172
3. Turn the bulb counterclockwise
and remove it. Install a new bulb, turn
it clockwise, then plug in the connec-
tor.
To install a bulb, align the tab of the bulb
socket with the cutouts of the mountinghole.
RIGHT SIDE HEADLIGHT: Install the air
cleaner cover securely.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.1. Open the hood.
RIGHT SIDE HEADLIGHT: Release the
clips of the air cleaner and remove the
air cleaner cover.2. Turn the cover counterclockwise
and remove it.
ÐFront fog lights

183
9. STOP 15 A: Stop lights, cruise control
system cancel device
10. CIG 15 A: Cigarette lighter, air condi-
tioning system, SRS airbag system, theft
deterrent system, shift lock control sys-tem
11. RAD NO.2 7.5 A: Radio, cassette
tape player, power antenna
12. TAIL 10 A: Tail lights, parking lights,
front side marker lights, rear side marker lights, licence plate lights
13. ECU-IG 10 A: Cruise control system,
anti-lock brake system, power steering,
power antenna, theft deterrent system,
shift lock control system, traction control system14. GAUGE 10 A: Gauges and meters,
service reminder indicators and warning
buzzers (except discharge and open door
warning lights), rear window defogger,
charging system, cruise control system,
electronically controlled automatic trans-mission system, traction control system
15. ECU-B 10 A: Air conditioning sys-
tem, cruise control system, anti-lock brake system, SRS airbag system, trac-tion control system
16. EFI NO.2 30 A: Multiport fuel injection
system/sequential multiport fuel injection
system17. EFI NO.1 30 A: Multiport fuel injection
system/sequential multiport fuel injection
system
18. AM2 30 A: Starter system
19. FOG 15 A: Front fog lights
20. HAZ-HORN 15 A: Emergency flash-
ers, horns
21. TRAC 7.5 A: Traction control system
22. ALT-S 7.5 A: Charging system
23. DOME 7.5 A: Interior lights, personal
lights, door courtesy lights, luggage
compartment light, ignition switch light,
open door warning light, theft deterrent
system, daytime running light system