162
11.Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
designated in Part 8. If the pressure is
lower, drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat
tire securely.
As soon as possible after changing
wheels, tighten the wheel nuts to the
torque specified in Part 8 with a torque
wrench and have a technician repair the
flat tire.
Before driving, make sure all the
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal
injury during a collision or sudden
braking.CAUTION
!
Wagon with third seat onlyÐWhen storing
the flat tire, install the tire with the bolt
fitted in the upper hole of the tire stopper.
At this time, the spare tire cover cannot be
put on.
ÐAfter changing wheels
ProCarManuals.com
215 Trailer towingkPa (kgf/cm
2
or bar, psi)
5S-FE engined vehicles1MZ-FE engined vehicles
FrontRearFrontRear
Sedan and coupe210 (2.1, 30)210 (2.1, 30)220 (2.2, 32)220 (2.2, 32)
Wagon220 (2.2, 32)240 (2.4, 35)220 (2.2, 32)240 (2.4, 35)
When driving under the above vehicle load conditions at sustained high speeds above 160 km/h (100 mph), in countries where such
speeds are permitted by law, inflate the front and rear tires to 240 kPa (2.4 kgf/cm2
or bar, 35 psi) provided that it does not exceed
the maximum cold tire pressure molded on the tire sidewall.
Wheel size:
P195/70R14 90H 14 x 5.5 JJ
P205/65R15 92H 15 x 6 JJ
P205/65R15 92V 15 x 6 JJ
T135/90R15 15 x 4 T
T145/80R16 16 x 4 T
Wheel nut torque, Nm (kgfm, ftIbf):
104 (10.5, 77)
ProCarManuals.com
