1996 Mercury Villager headrest

42
*
[SR20510(ALL)06/95]
RWARNING
Only use the tether attachment hole locations shown in
the illustrations. The tether anchor may not perform
properly if the wrong mounting location is used.
*
[SR20520(ALL)05/95]
RWARNING
Failure to follow these precautions could increase the
chance of injury in an accident.
*
[SR20530(ALL)05/95]
RWARNING
If the anchor bolt(s) is ever removed, the hole(s) in the
floor must be sealed to prevent the possibility of exhaust
fumes entering the passenger compartment.
[SR20760(ALL)12/94]
Tethering to lap/shoulder belt tongue
[SR20770(ALL)05/96]
To attach a tether strap to a lap/shoulder belt:
[SR20775(ALL)05/96]1.
Route the tether strap under the headrest and between the
headrest supports.
[SR20780(ALL)05/96]2.
Hook the tether strap hook into the large hole at the end of
the tongue of the lap/shoulder belt directly behind the child
seat position.
[SR20785(ALL)05/96]3.
Adjust the tether strap length until the hook is about one
foot behind the seatback.
[SR20790(ALL)05/96]4.
Pull the shoulder belt until all of the belt is fully extended
and a click is heard. At this time the belt is in automatic
locking mode (child restraint mode).
[SR20795(ALL)05/96]5.
Let the retractor wind up the slack from the lap/shoulder
belt. A clicking sound should be heard as the belt retracts,
indicating that the retractor is in the automatic locking mode.
Tighten the tether strap to remove any slack.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996