1996 Mercury Villager warning

190
[RR08000(ALL)01/93]
Installing the Removable Bucket Seats
[RR08100(ALL)01/93]
To position the bucket seats back in their original positions:
[RR08200(ALL)06/95]1.
Make sure the area around the floor anchor positions is free
from obstruction.
[RR08300(ALL)01/93]2.
With the seatback folded down, two people should lift the
seat into the vehicle.
[RR08400(ALL)01/93]3.
Place the seat slightly behind the floor anchor positions and
catch the rear leg anchors into each anchor position.
[RR08500(ALL)01/93]4.
Press down on the front of the seat to secure the front legs
to the two floor latch locks. Place the seatback in the upright
position.
[RR08600(ALL)01/93]5.
Try to move the seat to be sure that it is securely fastened.
[RR08650(ALL)06/95]6.
Replace any floor mats that were removed.
[RR08700(ALL)01/93]
Labels have been provided on the side of the seats to remind
you of important safety precautions.
[RR09000(ALL)01/93]
RWARNING
Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs
from engaging properly.
File:09vxrrn.ex
Update:Mon Jun 3 14:46:49 1996

Adjustable Rear Seating
191
[RR09100(ALL)01/93]
RWARNING
Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.
*
[RR09200(ALL)05/95]
RWARNING
Never adjust the driver's seat or seatback when the
vehicle is moving.
[RR09300(ALL)01/93]
Three-Passenger Bench Seat
[RR09400(ALL)01/93]
When entering and exiting the vehicle, third-row passengers
must be careful that they step over the auxiliary safety restraint
system that is present with the second-row bench seat. Labels
are provided on the back of the second-row bench seat to
remind passengers to use care when exiting.
[RR09600(ALL)01/93]
The three-passenger bench seat can be positioned in any of five
positions along the seat track. Three of these positions are for
seating and two are storage positions to accommodate varying
cargo requirements.
File:09vxrrn.ex
Update:Mon Jun 3 14:46:49 1996

196
[RR10700(ALL)01/93]
RWARNING
After moving the third-row seat, be sure to latch the seat
in a passenger seating position. Improper location of the
seat will prevent correct use of the safety belts and will
increase the risk of severe injury in an accident. After
sliding the seat, check that both sides of the seat are
locked securely by attempting to move each side of the
seat forward and backward. This must be done before
the vehicle is put into motion in order to prevent
unintended movement of the seat and potential passenger
injuries.
[RR10800(ALL)01/93]
NOTE: Before rearranging the seats, remove any floor mats
that might be in the way.
[RR10900(ALL)01/93]
The three-passenger seat can be stored behind the second-row
seat(s) to provide extra cargo space in the rear of the vehicle.
[RR11000(ALL)01/93]
With the second row seat(s) removed, the three-passenger bench
seat can be moved all the way forward, just behind the front
seats for more room in the cargo area.
File:09vxrrn.ex
Update:Mon Jun 3 14:46:49 1996

Adjustable Rear Seating
201
[RR12400(ALL)01/93]4.
Lower the seat cushion only if in a seating position. The seat
cushion will not lower in a storage position. Do not try to
lower the seat cushion by force because doing so could
damage the seat.
[RR12500(ALL)01/93]5.
Replace any floor mats that were removed.
[RR12600(ALL)01/93]
RWARNING
Every time you adjust any seat, check to be sure that it is
properly latched in the lock position of both seat tracks.
If the seat is not properly latched, it could come loose
and increase the risk of severe injury or death in an
accident.
File:09vxrrn.ex
Update:Mon Jun 3 14:46:49 1996

Adjustable Rear Seating
203
[RR13000(ALL)09/93]
24 pica art:0040132-B
Table and built-in cupholders on the fold-down seatback
[RR13100(ALL)01/93]
RWARNING
You should never place hard items such as coffee mugs
or drinking glasses on the table-top seats when the
vehicle is moving. Any item can become a projectile
inside a vehicle involved in a collision. To help prevent
personal injury, never leave loose items on the fold-down
table-top seats when the vehicle is moving.
File:09vxrrn.ex
Update:Mon Jun 3 14:46:49 1996

222
[AS32100(ALL)06/95]
How to Take Care of and Clean Your CD Changer and
Discs
[AS32220(ALL)06/95]
To ensure the continued performance of your Ford Compact
Disc Changer, carefully read the following precautions:
*
[AS32230(ALL)04/95]
n
Always handle the disc by its edge. Never touch the playing
surface.
*
[AS32240(ALL)04/95]
n
Before playing, inspect the disc for any contamination. If
needed, clean the disc with an approved disc cleaner, such as
the DiscwasherHCompact Disc Cleaner or the Allsop 3H
Compact Disc Cleaner, by wiping from the center out to the
edges.Do not use a circular motion to clean.
*
[AS32250(ALL)04/95]
n
Do not clean discs with solvents such as benzine, thinner,
commercially available cleaners or antistatic spray intended
for analog records.
*
[AS32260(ALL)04/95]
n
Do not expose the disc to direct sunlight or heat sources
such as defroster and floor heating ducts. Do not leave any
discs in a parked car in direct sunlight where there may be a
considerable rise in temperature or damage may result.
*
[AS32270(ALL)04/95]
n
After playing, store the disc in its case.
[AS32280(ALL)06/95]
n
If a disc has already been inserted, do not try to insert
another disc. Doing so may damage the disc changer.
[AS32290(ALL)06/95]
n
Do not insert anything other than a disc into the disc
changer.
*
[AS32295(ALL)05/95]
RWARNING
The laser beam used in the compact disc player is
harmful to the eyes. Do not attempt to disassemble the
case.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

229
Driving Your Villager
%*[DR01000(ALL)01/93]Automatic Transaxle Operation
*[DR01100(ALL)01/95]Putting Your Vehicle in Gear
*[DR01200(ALL)04/95]Your vehicle's gearshift lever is on the steering column. The
OVERDRIVE OFF/ON button is located on the end of the
gearshift lever. You can put the gearshift lever in any one of
several positions.
[DR01300(ALL)06/95]
10-1/2 pica art:0040163-F
The steering column gearshift lever positions
*[DR01400(ALL)05/95]RWARNING
Hold the brake pedal down while you move the gearshift
lever from position to position. If you do not hold the
brake pedal down, your vehicle may move unexpectedly
and injure someone.
*[DR01500(ALL)01/93]Once you place the gearshift lever securely into position,
gradually release the brake pedal and use the accelerator as
necessary.
File:11vxdrn.ex
Update:Tue Jun 4 11:42:50 1996

230
[DR01600(ALL)09/93]Shift-lock Safety Feature
[DR01700(ALL)04/95]Your vehicle has a special shift-lock safety feature which
prevents you from shifting out of P (Park) without the brake
pedal depressed. To shift the transaxle out of the P (Park)
position, the ignition must be in the ON position and your foot
must be pressing on the brake pedal.
*[DR01800(ALL)04/95]If the shift lever cannot be moved from the P (Park) position
with the brake pedal depressed:
*[DR01900(ALL)01/93]1.Shut the engine off and remove the ignition key.
*[DR02000(ALL)01/93]2.Apply the parking brake.
*[DR02100(ALL)01/93]3.Reinsert the ignition key and turn it clockwise to the first
position (OFF).
*[DR02200(ALL)04/95]4.Depress the brake pedal, move the gearshift lever to N
(Neutral) and start the engine.
*[DR02290(ALL)06/95]If you need to shift out of P (Park) by using the alternate
procedure described above, it is possible that a fuse has blown
and that your brakelamps may also not be functional. Please
refer to the chapter titledServicing Your Villagerin this Owner
Guide for instructions on checking and replacing fuses.
*[DR02300(ALL)05/95]R WARNING
DO NOT DRIVE YOUR VEHICLE UNTIL YOU VERIFY
THAT THE BRAKELAMPS ARE WORKING.
%*[DR02500(ALL)06/92]Backing Up
*[DR02600(ALL)06/95]Before shifting into or out of R (Reverse), you should always
come to a complete stop.
File:11vxdrn.ex
Update:Tue Jun 4 11:42:50 1996