1996 Mercury Villager lock

56
[SR21950(ALL)06/95]5.
While holding the cushion release strap, rotate the cushion
upward until it fits flush with the second row seatback pad.
[SR21975(ALL)06/95]
13-1/2 pica
art:0040326-A[SR22000(ALL)06/95]6.
Confirm that the built-in child seat is locked in the stowed
position by grasping the safety seat cushion and attempting
to lower it without pulling the cushion release strap.
[SR22025(ALL)07/95]7.
If the built-in child seat is not locked in the stowed position,
repeat steps 4 through 6.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

57
Starting Your Villager
*
[ST02400(ALL)03/95]
Ignition
*
[ST02500(ALL)01/95]
Understanding the Positions of the Ignition
[ST02600(ALL)06/95]
Your vehicle's ignition has four positions. They are:
*
[ST02700(ALL)06/95]
13-1/2 pica
art:0040047-D
The ignition positions
*
[ST02800(ALL)01/93]
ON allows you to test your vehicle's warning lights to make
sure they work before you start the engine. The key returns to
the ON position once the engine is started and remains in this
position while the engine runs.
[ST02900(ALL)06/95]
START cranks the engine. Release the key once the engine starts
so that you don't damage the starter. The key should return to
the ON position when you release it.
[ST03000(ALL)06/95]
OFF/LOCK allows you to shut off the engine and all accessories
and locks the gearshift lever. Removing the key then locks the
steering wheel.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

58
[ST03200(ALL)01/93]
ACCESSORY allows you to operate some of your vehicle's
electrical accessories while the engine is not running. For
example, you can use ACCESSORY to turn on the radio,
windshield wipers, or operate the cigarette lighter without
starting the engine.
%*
[ST03300(ALL)03/95]
Ignition Key Chime
[ST03400(ALL)02/95]
The chime will sound if you open the driver's door while the
key is in the ignition. Never leave your vehicle unattended with
the key in the ignition.
%*
[ST03500(ALL)02/95]
Removing the Key From the Ignition
[ST03600(ALL)06/95]
OFF/LOCK is the only position that allows you to remove the
key from the ignition. The LOCK feature helps to protect your
vehicle from theft, because it also locks the steering wheel and
the gearshift lever when the key is removed.
%*
[ST03700(ALL)01/93]
If your key is stuck in the LOCK position, and you are unable
to turn it, move your steering wheel left or right until the key
turns freely.
*
[ST03800(ALL)01/93]
To remove your key from the ignition:
*
[ST03900(ALL)05/95]1.
Put the gearshift lever in P (Park).
*
[ST04000(ALL)02/95]2.
Set the parking brake fully.
*
[ST04100(ALL)03/95]3.
Turn the ignition key to LOCK.
*
[ST04200(ALL)03/95]4.
Remove the key.
*
[ST04300(ALL)06/95]
RWARNING
When you leave your vehicle, place the gearshift lever in
P (Park). Set the parking brake fully, and shut off the
engine. Never park your vehicle in N (Neutral). If you do
not take these precautions, your vehicle may move
suddenly and injure someone.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

Starting Your Villager
61
*
[ST07200(ALL)04/94]
For a warm engine:
*
[ST07300(ALL)04/95]
n
Do not hold the key in the START position for more than
five (5) secondsat a time. If the engine does not start within
five (5) seconds on the first try, turn the key to the OFF
position. Wait a few seconds after the starter stops, then try
again.
*
[ST07350(ALL)05/95]
Whenever you start your vehicle, release the key as soon as the
engine starts. Excessive cranking could damage the starter or
flood the engine.
*
[ST07360(ALL)02/95]
After you start the engine, let it idle for a few seconds.Keep
your foot on the brake pedaland release the parking brake.
Put the gearshift lever in gear, slowly release the brake pedal
and drive away in the normal manner.
*
[ST07370(ALL)02/95]
NOTE: Your vehicle has an interlock that prevents you from
shifting out of Park (P) unless your foot is on the
brake pedal.
%*
[ST07500(ALL)04/95]
If the engine does not start after two attempts:
*
[ST07600(ALL)04/95]1.
Turn the ignition key to the OFF position.
*
[ST07700(ALL)04/95]2.
Press the accelerator all the way to the floor and hold it.
*
[ST07800(ALL)04/95]3.
Turn the ignition key to the START position.
*
[ST07900(ALL)04/95]4.
Release the ignition key when the engine starts.
*
[ST08000(ALL)04/95]5.
Release the accelerator gradually as the engine speeds up.
Then drive away in the normal manner.
*
[ST08100(ALL)04/95]
If the engine still does not start, the fuel pump shut-off switch
may have been triggered. For directions on how to reset the
switch seeFuel Pump Shut-Off Switchlater in this chapter.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

62
*
[ST08200(ALL)05/95]
A computer system controls the engine's idle speed. When you
start your vehicle, the engine's idle speed normally runs high.
These faster engine speeds will make your vehicle move slightly
faster than its normal idle speed. It should, however, slow down
after a short time. If it does not, have the idle speed checked.
*
[ST08290(ALL)06/95]
If the engine idle speed does not slow down automatically, do
not allow your vehicle to idle for more than 10 minutes. Have
the vehicle checked.
*
[ST08300(ALL)05/95]
RWARNING
Extended idling at high engine speeds can produce very
high temperatures in the engine and exhaust system,
creating the risk of fire or other damage.
*
[ST08400(ALL)05/95]
RWARNING
Do not park, idle, or drive your vehicle in dry grass or
other dry ground cover. The emission system heats up
the engine compartment and exhaust system, which can
start a fire.
*
[ST08500(ALL)03/95]
If you consistently start your vehicle in subzero temperatures,
use an engine block heater (if your vehicle has this option).
%*
[ST08600(ALL)06/95]
Engine Block Heater (If equipped)
[ST08700(ALL)02/95]
Engine block heaters are strongly recommended if you live in a
region where temperatures reachs10ÊF (s23ÊC) orbelow. An
engine block heater warms the engine coolant, which improves
starting, warms up the engine faster, and allows the
heater-defrost system to respond more quickly.
*
[ST08900(ALL)05/95]
RWARNING
To prevent electrical shock, do not use your heater with
ungrounded electrical systems or two-pronged (cheater)
adapters.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

70
%*
[LG01400(ALL)02/95]
Anti-Lock Brake System Warning Light (If Equipped)
*
[LG01500(ALL)12/93]
To check the anti-lock brake warning light, turn the ignition key
to the ON position. The ABS warning light should glow
momentarily.
*
[LG01600(ALL)10/93]
NOTE: If it does not glow at all or stays on for a long time,
have your vehicle's electrical system checked
immediately.
[LG01700(ALL)02/94]
6 pica art:0040051-B
Anti-lock brake system warning light
*
[LG01800(ALL)05/95]
RWARNING
If the anti-lock brake system warning light remains on or
comes on while driving, have the braking system checked
by a qualified service technician as soon as possible.
*
[LG01810(ALL)06/95]
NOTE: If a fault occurs in the anti-lock system, and the brake
warning light is not lit, the anti-lock system is
disabled but normal brake function remains
operational.
%*
[LG01900(ALL)05/95]
Safety Belt Warning Light and Chime
[LG02005(ALL)02/95]
This warning light and chime remind you to fasten your safety
belt.
[LG02010(ALL)04/95]
n
If the safety belt is not buckled when the ignition is turned
to the ON position, the chime will turn on for four (4) to
eight (8) seconds and the light will remain on continuously,
or until the safety belt is fastened.
File:05vxlgn.ex
Update:Tue Jun 4 11:35:19 1996

Instrument Panel Controls
91
[IP01400(ALL)01/93]
The controls for the climate control systems, headlamps, clock,
radio, rear window washer and wiper, hazard flasher, power
switch, and speed control are all on the instrument panel.
*
[IP01500(ALL)01/93]
Climate Control Systems
[IP01600(ALL)04/95]
13-1/2 pica
art:0040301-A
Climate control system panel
[IP01700(ALL)01/93]
Function Selector Buttons
[IP01800(ALL)01/93]
There are six function selector buttons: OFF, Mix, Defrost, Panel,
Panel/Floor, and Floor. When you press a function selector
button, the indicator light on the button will illuminate. If your
vehicle is equipped with a rear passenger compartment climate
control system, the instrument panel will also include a rear seat
function selector lever.
[IP01900(ALL)04/94]
n
The OFF button shuts off the air supply to all outlets and
stops all fan operations. Use this setting when driving
through an area where outside air is unpleasant or dusty.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

96
[IP04900(ALL)01/93]
n
Remove any snow, ice, or leaves from the area below the
windshield on the outside of your vehicle. They could block
the air intake.
*
[IP05000(ALL)06/94]
Heating and Air Conditioning System (If equipped)
*
[IP05100(ALL)06/95]
Turning on the heat
[IP05200(ALL)01/93]
You can heat the inside of your vehicle and defrost the
windshield using the function selector buttons located in the
control assembly in the instrument panel.
[IP05300(ALL)07/95]
The six function selector buttons are: OFF, Mix (P), Defrost
(V) Panel (Q), Panel/Floor (S), and Floor (R). If your
vehicle is equipped with a rear seat climate control system, the
instrument panel will also include a rear seat climate control
lever. To turn on the rear passenger compartment control
system, select REAR, 1, 2, 3, or 4. With the lever set to REAR,
rear seat passengers will have control of rear fan speed on the
rear seat climate control panel. Positions 1, 2, 3, or 4 will control
rear fan speed from the front control panel. The temperature of
the air from the rear system is controlled by the rear passenger
compartment climate control system.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996