1996 Mercury Villager reset

Electronic Sound Systems
211
[AS02100(ALL)06/95]
n
Using the ªTUNEº button to select the tune function
[AS02200(ALL)06/95]
You can change the frequency up or down one increment at
a time (FM changes in increments of 200 kHz; AM changes
in increments of 10 kHz) by pressing the ªTUNEº button. To
change frequencies quickly, press andhold downeither the
right or left side of the ªTUNEº button.
[AS02300(ALL)05/94]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (SeeAll About Radio Frequencieslater in this
chapter.)
*
[AS02400(ALL)04/95]
n
Using the ªSEEKº function
*
[AS02500(ALL)06/95]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right (
a) side of the ªSEEKº button to select the next
listenable station up the frequency band. Press the left (
b)
side of the button to select the next listenable station down
the frequency band. By holding the button down, listenable
stations can be passed over to reach the desired station.
[AS02600(ALL)06/95]
n
Using the ªSCANº button to scan radio stations
[AS02700(ALL)06/95]
Pressing the ªSCANº button once enters the scan mode by
stopping on each listenable station for a five-second
sampling. The radio band (AM/FM1/FM2) will blink to
indicate that the radio is scanning.
[AS02800(ALL)06/95]
To stop the scan mode on the presently sampled station
press the ªSCANº button again.
[AS03000(ALL)03/93]
Setting the station memory preset buttons
[AS03100(ALL)06/95]
Your radio is equipped with 6 station memory buttons. These
buttons can be used to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2). Follow the easy steps
below to set these buttons to the desired frequencies:
*
[AS03200(ALL)06/95]1.
Select a band, then select a frequency.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

212
*
[AS03400(ALL)06/95]2.
Press one of the memory preset buttons and hold the button
until the sound returns. That station is now held in memory
on that button.
*
[AS03500(ALL)06/95]3.
Follow the two steps above for each station memory preset
button you want to set.
[AS03550(ALL)06/95]
NOTE: If the vehicle's battery is disconnected, the Station
Memory Preset buttons will need to be reset.
[AS03600(ALL)06/95]
n
Using the Automatic Memory Store feature (Supersound
only)
[AS03900(ALL)06/95]
Activate Auto Memory Store by pushing the ªAUTO SETº
button once. Your radio will set the first six strong stations
of the band you are in (AM, FM1 or FM2) into the memory
buttons. The display will show ªAUTO,º then run through
the frequencies, stopping momentarily on the stations being
set into the memory buttons. The radio is now in the
ªAUTOº mode and this display will show ªAUTOº each
time a preset selected by ªAUTO SETº is activated.
*
[AS03950(ALL)06/95]
With Auto Memory Store, you can continually set strong
stations into your memory buttons without losing your
existing memory presets, which is especially handy while
traveling. Your radio will automatically set your memory
buttons to the strong local stations so you don't have to
continually manually tune to existing stations.
*
[AS04000(ALL)06/95]
NOTE: If there are fewer than six strong stations in the
frequency band, the remaining unfilled buttons will
store the last strong station detected on the band.
*
[AS04100(ALL)05/95]
After all stations have been filled, the radio will begin
playing the station stored on memory button 1.
[AS04200(ALL)06/95]
To deactivate the Auto Memory Store mode and return to
the manually-set memory button stations, simply push the
ªAUTO SETº button. Display will show ªAUTOº then
ªOFF.º
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

224
[AS32400(ALL)06/95]
Rear Seat Radio Control Operation
[AS32410(ALL)06/95]
13-1/2 pica
art:0040313-A
Rear seat radio controls
*
[AS32420(ALL)06/95]
How to turn the rear seat radio controls on and off
[AS32440(ALL)06/95]
Press memory preset buttons ª3º and ª5º simultaneously on the
face of your radio to turn the rear seat radio controls on. A
headphones symbol (j) will appear in the display when the
rear seat controls are on. Press ª3º and ª5º simultaneously
again to turn rear seat radio controls off.
*
[AS32460(ALL)06/95]
How to adjust the volume
[AS32480(ALL)06/95]
Press the right (R) side of the ªVOLUMEº rocker switch to
increase volume, and push the left (s) side to decrease the
volume of the rear speakers.
[AS32500(ALL)06/95]
NOTE: Rear seat control volume can be set no higher than
current radio setting.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
225
[AS32520(ALL)06/95]
Using the ªPROGRAM ADVANCEº button
[AS32540(ALL)06/95]
This button has different functions depending on the audio
source. In radio mode, pressing this button will cycle through
the memory presets for the given frequency band (AM, FM1,
FM2). In the cassette mode, pressing this button will change
tape sides. During the CD operation, this button will cycle
through the discs (one button push, one disc advance).
[AS32560(ALL)06/95]
Using the ªSOURCE SELECTº button
[AS32580(ALL)06/95]
This button will cycle through all modes then begin to play. The
cycle order is as follows: AM, FM1, FM2, tape, CD (if
equipped).
[AS32600(ALL)06/95]
How to turn the speakers on and off
[AS32620(ALL)06/95]
When the rear seat controls are on, push the ªSPKRS, ON-OFFº
button to turn all speakers off. Push again to turn all speakers
on.
[AS32640(ALL)06/95]
Using headphones with the rear seat controls
[AS32660(ALL)06/95]
Two 3.5mm headphone jacks have been provided on the rear
seat controls. Plug headphones into the provided jack(s) to
operate headphones. Note that the headphones can be used only
when the speakers are off.
[AS32680(ALL)06/95]
Using the ªSEEKº button
[AS32700(ALL)06/95]
This button has different functions for each source (mode). In
radio mode, pressing ªSEEKº proceeds to the previous or next
station. In cassette mode, this button is an Automatic Music
Search (AMS), moving to the next or previous selection on the
tape. In CD mode, this button moves to the beginning of the
next or previous track.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

226
[AS32720(ALL)06/95]
How to Use Your Steering Wheel Audio
Controls (If equipped)
[AS32740(ALL)06/95]
If your vehicle is equipped with steering wheel audio controls,
the controls are located on the inner right rim of the steering
wheel. These controls duplicate some of the audio functions.
[AS32760(ALL)06/95]
How to adjust volume
[AS32780(ALL)06/95]
Press the up arrow button (G) to increase the volume.
[AS32800(ALL)06/95]
Press the down arrow button (H) to decrease the volume.
[AS32820(ALL)06/95]
Using the ªNEXTº button
[AS32840(ALL)06/95]
This control has different functions for each source (mode). In
the radio mode, the radio will cycle through the memory
presets for the given frequency band. In cassette mode, the tape
advances to the next selection. In CD mode, the CD will move
to the next track on the given disc.
*
[AS35200(ALL)06/95]
Common Radio Reception Conditions
[AS35300(ALL)03/93]
Several conditions affect FM reception and can result in noise or
interference in the reception. These are:
[AS35400(ALL)03/93]
Distance/Strength
[AS35500(ALL)05/94]
The strength of the FM signal is directly related to the distance
the signal must travel. The listenable range of an average FM
signal is approximately 25 miles (40 km). Beyond this distance,
the radio is operating in a ªfringeº area and the signal becomes
weaker.
[AS35600(ALL)03/93]
Terrain
[AS35700(ALL)05/94]
The terrain (hills, mountains, tall buildings) of the area over
which the signal travels may prevent the FM signal from being
noise-free.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Roadside Emergencies
273
*
[RE10800(ALL)01/93]
Fuel Pump Shut-Off Switch
*
[RE10900(ALL)03/95]
If the engine cranks but does not start or if you have had a
collision, the fuel pump shut-off switch may have been
triggered. The shut-off switch is a device that stops the fuel
pump when your vehicle has been involved in a substantial jolt.
*
[RE11000(ALL)01/95]
For information on how to check and reset the fuel pump
shut-off switch, seeFuel pump shut-off switchin the Index.
*
[RE11150(ALL)05/95]
Towing Your Vehicle
[RE11175(ALL)04/95]
If you need to have your vehicle towed, contact a professional
towing service or, if you are a member, your roadside assistance
center.
[RE11200(ALL)07/95]
DO NOT TOW YOUR VILLAGER WITH SLINGBELT
EQUIPMENT. Ford Motor Company has not developed or
approved a T-hook sling-type procedure. Use wheel lift or
flatbed equipment.
File:12vxren.ex
Update:Tue Jun 4 11:42:14 1996

346
[SV37250(ALL)06/95]
eighteen pica
chart:0040328-A%*
[SV37900(ALL)03/95]
Circuit Breakers
[SV38000(ALL)01/93]
If you need to check a circuit breaker that is on the fuse panel,
seeFuses, checking and replacingin the Index to find out how to
locate the fuse panel.
[SV38100(ALL)01/93]
Since you need diagnostic equipment to check whether a circuit
breaker works and such equipment comes with instructions, we
do not discuss how to check circuit breakers. If you have
questions about circuit breakers or how to check them, see your
Lincoln-Mercury dealer.
*
[SV38200(ALL)10/92]
However, you should know that the circuit breakers will reset
themselves and allow the electrical parts to work again once the
overload on the circuit is removed. If the circuit breakers
continue to cut off electricity, have your vehicle's electrical
system checked.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

364
*
[SV44300(ALL)01/95]
Do not drive your vehicle if it does not operate properly. See
your dealer if the engine runs on for more than five seconds
after you shut it off or if it misfires, surges, stalls, or backfires.
*
[SV44400(ALL)11/93]
Information about your vehicle's emissions control system is on
the Vehicle Emission Control Information decal located on or
near the engine. This decal identifies engine displacement and
gives some tune-up specifications.
%*
[SV44405(ALL)07/95]
Readiness for Inspection/Maintenance Testing
*
[SV44410(ALL)07/95]
In some localities it may become a legal requirement to pass an
Inspection/Maintenance (I/M) test of the On-Board Diagnostic
(OBD) II system. If the vehicle's powertrain system or its battery
has just been serviced, the OBD II system is reset to a not ready
for I/M testing condition. To prepare for I/M testing, the law
specifies a ªneed for additional mixed city and highway driving
to complete the checkº of the OBD II system. As soon as all of
the OBD II system checks are successfully completed, the OBD
II system is set to the ready condition. The amount of driving
required to reach the ready condition varies with individual
driving patterns. To complete this requirement in the minimum
amount of time, refer to the OBD II Drive Cycle defined below.
If the vehicle owner cannot or does not want to do the
additional driving required by law, a service center can perform
this drive cycle as it would any other type of repair work.
*
[SV44415(ALL)09/95]
OBD II Drive Cycle
*
[SV44420(ALL)06/95]
The following steps must be run in the order shown. If any
steps are interrupted, repeat the preceding step. Any safe
driving mode is acceptable between steps.
*
[SV44425(ALL)06/95]
Always drive vehicle in safe manner according to traffic
conditions and obey all traffic laws.
*
[SV44430(ALL)07/95]
The engine must be warmed up and at operating temperature
before proceeding with the drive modes of the following OBD II
Drive Cycle.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996