1996 Mercury Sable warning

35
*
[SR22500(ALL)01/95]
RWARNING
All child restraint systems are
designed to be secured in vehicle
seats by lap belts or by the lap
portion of a lap-shoulder belt. If you
do not properly secure the safety seat
to the vehicle, the risk is greater that
a child, occupying the seat during a
collision or sudden stop, will be
injured. An unsecured safety seat
could also injure other passengers in
the vehicle.
*
[SR22600(ALL)01/95]
RWARNING
Carefully follow all of the
manufacturer's instructions that come
with the safety seat that you put in
your vehicle. Make sure that the
shoulder belt (if provided at the
seating position where the safety seat
is being used) does not cross or rest
in front of the child's face or neck. If
you do not install and use the safety
seat properly, the child may be
injured in a sudden stop or collision.
[SR22700(ALL)04/95]
RWARNING
If you have a wagon, never use child
safety seats in the third seat. Safety
seats for children are not intended
for use in rear facing seats.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

36
*
[SR22720(ALL)01/95]
RWARNING
Always keep the buckle release
button pointing upward and away
from the child seat, with the tongue
between the child seat and the
release button as shown in the
following illustration. Failure to
follow these instructions could result
in accidental unbuckling of the safety
belt if the child safety seat hits the
release button. Release of the safety
belt could result in serious injuries.
[SR22740(ALL)11/94]
half page art:0011286-A
Safety belt buckle placement for child seats
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

37 %
*
[SR22750(ALL)11/94]
Installing Child Safety Seats in the Front
Passenger Seat and Outer Rear Seating
Positions
[SR22800(ALL)12/94]
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portion of
the combination lap/shoulder safety belt for the
front passenger seat and rear outer seats. The
automatic locking modemust be usedwhen
installing a child seat or infant carrier in the
front passenger seat or rear outer seats.
*
[SR22850(ALL)11/94]
RWARNING
Never install a rear-facing child seat
or infant carrier in the right front
passenger seat.
*
[SR22901(ALL)03/95]
If you choose to install a child safety seat in the
front seating position, move vehicle seat as far
back as possible.
[SR22950(ALL)12/94]
1. Position the child seat on the passenger seat
of the vehicle.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

46
*
[SR24750(ALL)01/95]
RWARNING
When using any infant or child
restraint system, it is important that
you follow the instructions and
warnings provided by the
manufacturer concerning its
installation and use. Failure to follow
each of the restraint manufacturer's
instructions could increase the risk or
severity of an injury in the event of
a collision or sudden stop.
%*
[SR24800(ALL)04/95]
Attaching Safety Seats With Tether Straps
*
[SR24950(ALL)04/95]
Some manufacturers make safety seats that
include a tether strap that goes over the back of
the vehicle seat and attaches to an anchoring
point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of
your child safety seat for information about
ordering a tether strap.
*
[SR25050(ALL)04/95]
Front Seats
*
[SR25150(ALL)04/95]
To install a tether from a child safety seat in the
front seat:
*
[SR25250(ALL)04/95]
1. Buckle the lap/shoulder belt (in the seat
directly behind the front passenger seat in
which the child safety seat will be installed).
*
[SR25350(ALL)04/95]
2. Pull all the stored belt out of the rear seat
retractor to switch the retractor to automatic
locking mode.
*
[SR25375(ALL)04/95]
3. Let the retractor wind up the slack from the
lap/shoulder belt.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

47
*
[SR25425(ALL)04/95]
4. Install the child safety seat in the front seat.
Refer to the previous section onInstalling
Safety Seats. Hook the tether strap hook
around the webbing near the center of the
shoulder portion of the locked lap/shoulder
belt.
*
[SR25525(ALL)04/95]
5. Tighten the tether strap.
*
[SR25550(ALL)04/95]
Rear Seats
*
[SR25600(ALL)04/95]
If you use a tethered safety seat on one of the
rear seats, you can anchor the strap to the
appropriate tether anchor directly behind that
seat position.
[SR25725(ALL)04/95]
Tether anchorage hardware
[SR25800(ALL)04/95]
Attachment holes (at each rear outboard seating
position) have been provided in your vehicle to
attach anchor hardware, if required. Kits can be
obtained at no charge from any Ford or
Lincoln-Mercury dealer.
[SR26100(ALL)04/95]
Be sure to follow the child safety seat
manufacturer's instructions.
*
[SR26500(ALL)04/95]
RWARNING
Tighten the anchor according to
specifications. Otherwise, the safety
seat may not be properly secured and
the child may be injured in a sudden
stop or collision.
[SR26600(ALL)04/95]
In a station wagon, you simply attach the tether
strap to one of the anchors that are already
installed for you.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

50
*
[SR27300(ALL)03/95]
RWARNING
Always adjust the lap and shoulder
harness belts provided with this
child seat snugly around your child.
*
[SR27351(ALL)03/95]
Never leave your child unattended in
the vehicle.
*
[SR27400(ALL)03/95]
The child seat's metal and plastic
parts can become very hot when left
in the sun. These can cause burns to
unprotected skin.
*
[SR27451(ALL)03/95]
Failure to follow all of the
instructions on the use of this child
restraint system can result in your
child striking the vehicle's interior
during a sudden stop or crash.
*
[SR27500(ALL)03/95]
How to use the Built-In Child Seat
*
[SR27551(ALL)03/95]
Read the following procedures and all of the
labels on the Built-In Child Seat before using the
seat.
*
[SR27600(ALL)03/95]
RWARNING
Never use the Built-In Child Seat as
a booster cushion with the adult
safety belts. A child using the adult
belts could slide forward off the
front edge of the child seat cushion
and out from under the adult safety
belts.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

52 [SR27801(ALL)03/95]
one third page art:0001453-BFigure 3: Opening the built-in child seat
[SR27850(ALL)04/95]
4. Read the information and warnings on the
child seat cushion and shoulder safety belt.
Refer to Figure 4. Check the child's size,
weight and age to be sure the child is not
too small or too large for the child seat.
[SR27900(ALL)03/95]
one third page art:0001454-A
Figure 4: Child seat information and warnings
*
[SR28000(ALL)03/95]
5. If connected, squeeze the top and the bottom
of the right half of the chest clip and pull to
separate both halves.
[SR28100(ALL)04/95]
6. Place the child on the child seat and position
the shoulder belts over each shoulder. Refer
to Figure 5.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

53 [SR28125(ALL)04/95]
one third page art:0001456-B
Figure 5: Shoulder safety belt placement on the child
[SR28150(ALL)04/95]
NOTE: Read the following steps carefully to
become familiar with the indicator
windows located on each safety belt
tongue and the chest clip. When either
of the tongues or the chest clip is
unbuckled, the color red appears in the
window. When the tongues or chest
clip are securely buckled, the color
green appears.
[SR28200(ALL)04/95]
7. Insert either the left or right safety belt
tongue into the single opening of the crotch
safety belt buckle as shown in Figure 6. (It
does not matter which tongue is inserted
first.) Then insert the other tongue. Allow
belts to retract and fit snugly.
[SR28220(ALL)12/95]
NOTE: The indicator window on each tongue
must appear green when buckled.
[SR28240(ALL)12/95]
NOTE: If a belt locks during extraction, allow
belts to retract FULLY and repeat
procedure.
*
[SR28250(ALL)04/95]
RWARNING
If both tongues do not latch in the
buckle, do not use the child seat. See
your dealer for repairs.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995