1996 Mercury Sable lights

116
*
[SC03200(ALL)03/95]
To turn off the high beams, pull the lever
toward you until it latches. The high beam
indicator light turns off.
%*
[SC03300(ALL)03/95]
Flashing the Lights
*
[SC03400(ALL)08/95]
To flash the headlamps, pull the lever toward
you for a moment and then release it. The
headlamps will flash whether the headlamp
knob is on or off.
[SC03450(ALL)04/95]
one third page art:0001411-B
The turn signal lever
%*
[SC03500(ALL)03/95]
Windshield Wipers and Washer
*
[SC03600(ALL)03/95]
To turn on the windshield wipers, the ignition
key must be turned to the ON or ACC position.
[SC03900(ALL)05/94]
Turn the knob on the end of the turn signal
lever away from you to activate the wipers. The
first seven detents are interval wipe positions,
the eighth detent is the LO position, and the
ninth detent is the HI position.
*
[SC04000(ALL)01/95]
To turn the wipers off, turn the knob toward
you to the OFF position.
File:fcscs.ex
Update:Tue Aug 8 11:05:58 1995

128 %
*
[FV04251(ALL)03/95]
Using the Keyless Entry System
(If equipped)
*
[FV04301(ALL)02/95]
If your vehicle has the keyless entry system, you
can lock or unlock the vehicle doors without
using a key. The buttons for the system are near
the outside door handle on the driver's side. See
alsoRemote Entry Systemwhich follows this
description.
[FV04351(ALL)02/95]
one third page art:0000482-C
Keyless entry buttons
*
[FV04401(ALL)02/95]
When you bought your vehicle, you were given
a computer code that operates the system for
your vehicle. For your convenience, we have
duplicated this code in two places.
*
[FV04451(ALL)02/95]
The code is:
*
[FV04501(ALL)02/95]
q
on your owner's wallet card found in the
glove compartment
*
[FV04551(ALL)02/95]
q
taped to the computer module
[FV04601(ALL)03/95]
When you use this entry system, the illuminated
entry system turns on the interior lights for 25
seconds and the buttons on the keypad light up
for 5 seconds. Do not push the buttons with a
key, ballpoint pen, pencil or any other hard
object. These objects could damage the buttons.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

135
lock again, the horn will chirp and the external
lamps will flash. If a door or the liftgate is open
or ajar, the horn will give two short chirps
warning you that a door or the liftgate is open.
%*
[FV08100(ALL)02/95]
Remote entry personal alarm
*
[FV08151(ALL)02/95]
If you wish to activate the remote entry system
personal alarm, press the PANIC button. This
will honk the horn and flash the lights for
approximately 2 minutes 45 seconds. You can
turn it off by pressing the PANIC button again
from the transmitter or by turning the ignition
to the ON or ACCESSORY position.
*
[FV08200(ALL)02/95]
When you use the remote entry UNLOCK or
PANIC buttons, the illuminated entry system
turns on the vehicle's interior lights for 25
seconds. You can turn these lights off with the
remote entry LOCK button or by turning the
ignition to the ON or ACCESSORY position.
[FV08251(ALL)04/95]
THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
%*
[FV08300(ALL)04/95]
Arming and Disarming the Alarm System
with Remote Entry
*
[FV08351(ALL)04/95]
Your Remote Entry System will automatically
arm the factory installed Anti-Theft System when
the doors are locked, and automatically disarm it
when the doors are unlocked. The remote will
also reset the anti-theft alarm (when the driver's
door is unlocked or the PANIC button is pressed
on a programmed remote entry transmitter) if it
was triggered.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

137 %
*
[FV08700(ALL)02/95]
Replacing lost transmitters
*
[FV08751(ALL)02/95]
In the event a transmitter is lost, you should
take all your vehicle's transmitters to your
dealer to have the remote entry system
deprogrammed for the lost transmitter. This is
necessary to prevent further unauthorized use of
the lost transmitter.
*
[FV08800(ALL)02/95]
You can also purchase additional transmitters
(up to 4 transmitters can be used) from your
dealer. You will need to take all your
transmitters to the dealer so they can program
them to the remote entry system all at the same
time.
[FV08851(ALL)04/95]
Illuminated Entry System
*
[FV08900(ALL)04/95]
This system will provide illumination of the
vehicle's interior courtesy lamps when either
outside front door handle is pulled or when the
remote entry system is used to unlock the door
or sound the personal alarm. The system will
automatically turn off after approximately 25
seconds or when the ignition is turned to the
START or ACC position.
*
[FV08951(ALL)02/95]
NOTE: The inside lights will not turn off if
you have turned them on with the
dimmer thumbwheel or if any door is
open.
[FV09551(ALL)04/95]
Perimeter Anti-Theft System (If equipped)
*
[FV09600(ALL)04/95]
When armed, this system helps protect your
vehicle against break-ins or theft.
%*
[FV09651(ALL)04/95]
When an unauthorized entry occurs, the system
triggers and will:
*
[FV09700(ALL)02/95]
q
flash the headlamps, parking lamps, and theft
indicator lamp
*
[FV09751(ALL)04/95]
q
chirp the horn
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

139
to confirm the doors are locked, two short horn
chirps will warn you that the anti-theft system is
not arming.
*
[FV10301(ALL)04/95]
The anti-theft system is designed to work with
the factory installed remote entry system. It may
not work with other remote entry systems.
*
[FV10351(ALL)02/95]
When you get a single horn chirp by pressing
the LOCK button twice within 5 seconds on
your remote entry transmitter, you can be
assured that all doors are locked and the
anti-theft system is arming.
[FV10400(ALL)04/95]
Disarming the system
*
[FV10451(ALL)04/95]
An armed or triggered system can be disarmed
if you:
*
[FV10501(ALL)04/95]
q
Unlock the doors by pressing the remote
entry transmitter UNLOCK button.
*
[FV10551(ALL)04/95]
q
Unlock the doors by entering the unlock code
on the keyless entry keypad.
*
[FV10601(ALL)02/95]
q
Unlock any door or the liftgate with a key.
*
[FV10651(ALL)02/95]
q
Turn ignition to the ON or ACC position.
*
[FV10700(ALL)04/95]
q
Pressing the remote entry PANIC button will
disarm the anti-theft system only when the
anti-theft alarm is triggered and sounding.
*
[FV10751(ALL)02/95]
When unlocking the vehicle with a key, turn the
key all the way to the end of its travel or the
system may not disarm.
[FV10800(ALL)04/95]
NOTE: the flashing lights and honking horn
will shut off automatically within 2
minutes 45 seconds after the system is
triggered. It will trigger again if
another intrusion occurs.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

216 %
*
[DR29650(ALL)01/95]
Connecting the trailer's lights
*
[DR29700(ALL)01/95]
Do not connect a trailer's lighting system
wiring directly to your vehicle's lighting system
wiring.To get the proper equipment for
hooking up your trailer's lights, see your local
trailer dealer and your Ford dealer. Be sure to
follow their instructions carefully.
*
[DR29800(ALL)01/95]
If you do not install trailer lights correctly, you
may cause damage to the vehicle's lighting system.
*
[DR29900(ALL)01/95]
Driving While You Tow
*
[DR30000(ALL)08/95]
Be especially careful when driving while you
tow a trailer. Never drive faster than 45 mph
(70 km/h) when you tow in hilly country on
hot days. Also, anticipate stops so that you can
brake gradually.
[DR30175(ALL)04/95]
When you tow in steep hills, move the
automatic transaxle to 1 (First) (vehicles without
O/D OFF switch) or 2 (Second) (vehicles with
O/D OFF switch) when descending. This will
give more engine braking on downgrades. The
automatic transaxle will automatically downshift
to the proper gear on upgrades.
[DR30200(ALL)04/95]
If you tow in Overdrive while riding through
hilly country, your vehicle may frequently shift
between Overdrive and Third gears. To prevent
your vehicle from shifting too much, move the
gearshift to D (Drive) (column shift without
O/D OFF switch) or push the O/D OFF switch
(column or console shift). This will also give
better braking going down hills.
%*
[DR30300(ALL)01/95]
If you use the speed control while you are
towing on very long, steep grades, the speed
control may shut off.
[DR30400(ALL)04/95]
Servicing Your Vehicle When You Tow
*
[DR30500(ALL)08/93]
If you tow a trailer for a long distance, your
vehicle will need to be serviced more frequently
than usual. Refer to theMaintenance Schedule and
Recordbooklet for additional information.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

217
Roadside Emergencies
%*
[RE00310(ALL)03/95]
If Your Vehicle Needs a
Jump-Start
*
[RE00320(ALL)01/95]
Your vehicle's battery may die if you leave the
lights on or any electrical equipment on after
you turn the engine off. If this happens, you
may be able to jump-start from a booster battery
to start your vehicle.
*
[RE00400(ALL)01/95]
RWARNING
Flames, sparks, or lit cigarettes can
cause the gases around the battery to
explode, causing injury and damage.
Keep these things away from the
battery.
*
[RE00500(ALL)01/95]
To protect yourself when charging a
battery, always shield your face and
eyes. Make sure that you can breathe
fresh air.
File:fcres.ex
Update:Tue Aug 8 11:02:29 1995

219
*
[RE01200(ALL)03/95]
2. Do not disconnect the battery of the disabled
vehicle. You could damage the vehicle's
electrical system.
*
[RE01300(ALL)04/95]
3. Park the booster vehicle close to the hood of
the disabled vehicle.Make sure the vehicles
do not touch each other.Set the parking
brake on both vehicles and stay clear of the
engine cooling fan and other moving parts.
*
[RE01400(ALL)03/95]
4. Check all battery terminals and remove any
excessive corrosion before you attach the
jumper cables.
[RE01500(ALL)04/95]
5. Turn on the heater fan in both vehicles. If
you have electronic climate control, press the
VF-DEF button. Turn off all other switches
and lights.
%*
[RE01700(ALL)08/95]
Connecting the jumper cables
*
[RE02500(ALL)03/95]
1. Connect one end of the first jumper cable to
the positive (+) terminal of the discharged
battery. (You can connect either jumper cable
to the positive (+) terminal, as long as you
use the same cable for both positive
terminals.) Most jumper cables have a red
cable and a black cable. The red cable is
generally used for the positive terminals and
the black for the negative ones.
*
[RE02600(ALL)04/95]
2. Connect the other end of the first cable to
the positive (+) terminal of the booster
battery.
*
[RE02700(ALL)03/95]
3. Connect one end of the second cable to the
negative (s) terminal of the booster battery
Ð NOT to the discharged battery.
*
[RE02800(ALL)04/95]
4. Connect the other end of the second cable to
a good metallic surface on the engine or
frame of the disabled vehicle.
File:fcres.ex
Update:Tue Aug 8 11:02:29 1995