1996 Mercury Sable brake

131 [FV05701(ALL)03/95]
Arming, disarming and resetting your
perimeter anti-theft system (If equipped)
from the keyless entry pad
*
[FV05750(ALL)02/95]
If your vehicle is equipped with the optional
factory installed anti-theft system, the keyless
entry system will arm it when you use the 7/8
and 9/0 keys to lock the doors, and will disarm
or reset a triggered anti-theft alarm when you
enter in the five digit code to unlock the driver's
door.
*
[FV05800(ALL)03/95]
NOTE: Doors and the liftgate must be fully
closed for the anti-theft system to arm.
Refer to theAnti-Theft Systemsection
in this chapter for more details.
[FV05850(ALL)04/95]
Autolock (If equipped)
*
[FV05900(ALL)02/95]
The Autolock feature is part of your remote
keyless entry system and is enabled at the
factory. With the Autolock feature enabled, all of
the doors will automatically lock when:
[FV05950(ALL)04/95]
q
the vehicle doors and liftgate are fully closed
*
[FV06001(ALL)02/95]
q
the ignition key is turned to the ON position
*
[FV06050(ALL)02/95]
q
the brake pedal is pressed
*
[FV06100(ALL)02/95]
q
you shift through (Reverse)
*
[FV06150(ALL)08/95]
q
one second has elapsed after the brake pedal
is released
*
[FV06200(ALL)02/95]
The Autolock feature will repeat when:
[FV06250(ALL)04/95]
q
a door is opened and then all doors and
liftgate are closed
*
[FV06300(ALL)02/95]
q
the brake pedal is released
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

132
*
[FV06400(ALL)02/95]
The doors may not lock automatically at the
correct time if the driver:
*
[FV06450(ALL)02/95]
q
shifts through gears without pressing the
brake
*
[FV06500(ALL)02/95]
q
shifts through gears quickly after starting the
vehicle
*
[FV06550(ALL)02/95]
q
releases their foot from the brake while
someone has stepped out of the vehicle for a
moment
*
[FV06575(ALL)04/95]
You can deactivate the system by using the
buttons for the keyless entry system if you don't
want to use the Autolock feature.
*
[FV06600(ALL)02/95]
To deactivate the Autolock system:
*
[FV06650(ALL)02/95]
1. Enter your permanent five-digit entry code
(not the user code you may have set).
*
[FV06700(ALL)02/95]
2. Within 5 seconds, press and hold 7/8.
*
[FV06750(ALL)02/95]
3. Within 5 more seconds, press and release
3/4.
*
[FV06800(ALL)02/95]
4. Release 7/8.
*
[FV06850(ALL)02/95]
To reactivate the Autolock system, simply repeat
the instructions for deactivating the system. By
re-entering the code that deactivates the
Autolock, the keyless entry system reinstates the
Autolock feature.
*
[FV06900(ALL)04/95]
You can also deactivate or reactivate the
Autolock feature by this method:
[FV06950(ALL)04/95]
1. Make sure the anti-theft system is not armed
or triggered, ignition is off, and all doors
and liftgate are closed.
*
[FV07000(ALL)02/95]
2. Turn the ignition key from OFF to RUN.
*
[FV07050(ALL)02/95]
3. Press the door power unlock button 3 times.
*
[FV07100(ALL)02/95]
4. Turn the ignition key from RUN to OFF.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

152
[FV23500(ALL)04/95]
Positive Retention Driver's Side
Floor Mat (If equipped)
[FV23520(ALL)04/95]
Installing the Floor Mat
*
[FV23530(ALL)01/95]
Position the floor mat in the footwell. Place the
mat eyelet over the pointed end of the retention
post from the rear and rotate forward to install.
Adjust the floor mat position to allow proper
operation of accelerator pedal, brake pedal and
clutch pedal.
[FV23550(ALL)11/94]
half page art:0001094-B
The positive retention floor mat
[FV23560(ALL)04/95]
Removing the Floor Mat
*
[FV23570(ALL)01/95]
Lift floor mat just forward of retention post and
rotate rearward to disengage from retention
post.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

192
*
[DR03800(ALL)01/95]
Putting Your Vehicle in Gear
*
[DR04001(ALL)01/95]
RWARNING
Hold the brake pedal down while
you move the gearshift from position
to position. If you do not hold the
brake pedal down, your vehicle may
move unexpectedly and injure
someone.
*
[DR04050(ALL)03/95]
To operate:
*
[DR04101(ALL)01/95]
1. Start the engine.
*
[DR04150(ALL)01/95]
2. Depress and hold the brake pedal.
*
[DR04201(ALL)01/95]
3. Move the gearshift lever out of P (Park).
%*
[DR04250(ALL)04/95]
Your vehicle is equipped with a Brake Shift
Interlock safety feature. This feature prevents the
gearshift from being moved from the P (Park)
position until the brake pedal is depressed. This
feature is active when the ignition is in the ON
position. If the gearshift lever CANNOT be
moved from P (Park) with the brake pedal
depressed:
*
[DR04300(ALL)01/95]
1. Turn the engine off and remove the ignition
key.
[DR04350(ALL)11/94]
2. Reinsert the ignition key and turn clockwise
to the first position (OFF).
[DR04400(ALL)11/94]
3. Depress the brake pedal, move the gearshift
lever to N (Neutral) and start the engine.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

193
*
[DR04451(ALL)03/95]
RWARNING
If you need to shift out of P (Park)
by using the alternate procedure
described above, it is possible that a
fuse has blown and that your
brakelamps may also not be
functional. Please refer to the chapter
titledServicing Your Vehiclein this
Owner Guide for instructions on
checking and replacing fuses. DO
NOT DRIVE YOUR VEHICLE
UNTIL YOU VERIFY THAT THE
BRAKELAMPS ARE WORKING.
%*
[DR04501(ALL)11/94]
Using a column-mounted gearshift
*
[DR04550(ALL)04/95]
If your gearshift is on the column, you can use
any of the following positions:
[DR04601(ALL)11/94]
one third page art:0000491-E
The column-mounted gearshift
*
[DR04650(ALL)01/95]
Once you place the gearshift securely into
position, gradually release the brake pedal and
use the accelerator as necessary.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

194
*
[DR05100(ALL)01/95]
R (Reverse)
*
[DR05200(ALL)02/95]
With the gearshift in the R (Reverse) position,
the vehicle will move backward. You should
always come to a complete stop before shifting
into or out of R (Reverse).
*
[DR05250(ALL)01/95]
N (Neutral)
*
[DR05275(ALL)01/95]
With the gearshift in the N (Neutral) position,
the vehicle can be started and is free to roll.
Hold the brake pedal down while in this
position.
*
[DR05300(ALL)01/95]
Driving
%*
[DR05400(ALL)04/95]
When to usej(Overdrive)
[DR05500(ALL)04/95]
j(Overdrive) is the usual driving position for
an automatic overdrive transaxle. It works the
same way D (Drive) works, automatically
upshifting or downshifting as the vehicle speeds
or slows.
[DR05600(ALL)04/95]
However,j(Overdrive) also shifts into a fourth
gear Ð an overdrive gear Ð when your vehicle
cruises at a consistent speed for any length of
time. This fourth gear will increase your fuel
economy when you travel at cruising speeds.
*
[DR05800(ALL)03/93]
When to use D (Drive)
[DR06000(ALL)04/95]
D (Drive) eliminates the excessive shifting
between third and fourth gears that your vehicle
sometimes does when you are traveling through
hilly terrain inj(Overdrive). It also provides
more engine braking thanj(Overdrive) for
descending hills or city driving.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

195
*
[DR06100(ALL)04/95]
When to use 1 (First)
*
[DR06200(ALL)11/94]
Use 1 (First) when added engine braking is
desired when descending steep hills.
*
[DR06220(ALL)11/94]
The automatic transaxle will shift to the proper
gear to ascend any grade without any need to
shift to 1 (First).
[DR06300(ALL)04/95]
Do not go faster than 38 mph (61 km/h) in this
gear. You can upshift from 1 (First) to D (Drive)
or from 1 (First) toj(Overdrive) at any speed.
*
[DR06400(ALL)01/95]
P (Park)
*
[DR06500(ALL)11/94]
Always come to a complete stop before you shift
into P (Park). Make sure that the gearshift is
securely latched in P (Park). This locks the
transaxle and prevents the front wheels from
rotating.
*
[DR06600(ALL)01/95]
RWARNING
Do not use the P (Park) position in
place of the parking brake. Always
set the parking brake fully and make
sure that the gearshift is securely
latched in P (Park).
*
[DR06625(ALL)03/95]
Always turn off the ignition
whenever you leave your vehicle. Do
not leave your vehicle unattended
while the engine is running.
*
[DR06650(ALL)01/95]
If you do not take these precautions,
your vehicle may move unexpectedly
and injure someone.
[DR06700(ALL)11/94]
You can tell a column-mounted gearshift is
securely latched in P (Park) if you cannot move
it without pulling it toward you and rotating it
downward.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

196
[DR06705(ALL)04/95]
Driving with an Automatic
Overdrive Transaxle (Column or
Console Gearshift with O/D OFF
Switch)
[DR06710(ALL)02/95]
Your automatic overdrive transaxle provides
fully automatic operation in either D (Overdrive)
or with the O/D OFF Switch depressed. Driving
with the shift selector in D (Overdrive) gives the
best fuel economy for normal driving conditions.
For manual control, start in 1 (First) and then
shift manually.
*
[DR06730(ALL)01/95]
Putting Your Vehicle in Gear
[DR06735(ALL)04/95]
You must push in the thumb button to move the
console-mounted gearshift to the position you
choose.
[DR06740(ALL)02/95]
To move the gearshift out of P (Park), the
ignition must be turned from the locked position
to either the OFF or the ON position.
*
[DR06745(ALL)03/95]
To operate:
*
[DR06750(ALL)01/95]
1. Start the engine.
*
[DR06755(ALL)01/95]
2. Depress and hold the brake pedal.
*
[DR06760(ALL)01/95]
3. Move the gearshift lever out of P (Park).
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995