1996 Mercury Sable ECU

150 [FV23260(ALL)04/95]
one third page art:0001379-AFolding down the rear seatbacks
*
[FV23275(ALL)11/94]
To raise the seatback:
[FV23325(ALL)02/95]
1. Lift the seatback rearward until it is in the
upright position. Push the center of the seat
until you hear it latch.
*
[FV23330(ALL)11/94]
2. Make sure the seatback is locked in position
by pushing forward and backward on it.
*
[FV23360(ALL)11/94]
RWARNING
If you do not securely latch the
seatback in the upright position, the
seatback or objects could be thrown
forward during a sudden stop or
collision, possibly injuring you or
other passengers.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

162 [FV38150(ALL)04/95]Cargo Net (If equipped)
[FV38200(ALL)02/95]
The cargo net secures lightweight objects in the
cargo area of your vehicle. The net attaches to
anchors that are already in your trunk. Use all
available anchors to restrain the objects or they
will not be secured.
[FV38300(ALL)05/91]
one third page art:0000441-B
The cargo net for the wagon
[FV38400(ALL)04/95]
Do not put more than 50 pounds (22 kg) in the
net. Any ropes or cords that you use must be as
strong as the cargo net or strong enough to
restrain a 50-pound (22 kg) object.
[FV38450(ALL)04/95]
This net is not designed to retain objects
during an accident.
[FV38500(ALL)11/94]
Cargo Cover (If equipped)
[FV38600(ALL)01/89]
You can conceal luggage or cargo in the back of
your wagon with the cargo cover.
[FV38700(ALL)01/89]
To cover the back compartment:
[FV38800(ALL)02/95]
1. Fasten the cover into the molded pockets in
the trim panel. Make sure the cover is right
side up, so it unrolls from the top.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

164 [FV39700(ALL)10/90]3. Slide the rear crossbar forward to hold your
luggage securely in place.
[FV39800(ALL)02/95]
4. Clamp the adjusting levers again by pulling
them toward the outside of the vehicle.
[FV39825(ALL)00/95]
Make sure that the rear crossbar pins are locked
in slots by pulling forward and back on each of
the outside supports. If the crossbar slides, push
or pull until you hear it click and feel it lock
into position.
[FV39850(ALL)02/95]
5. Secure luggage or cargo with rope (up to
3/8"), NOT ELASTIC CORD, using the tie
down loops provided. There are three loops
on each outside rail and one at each end of
the cross bars.
[FV39875(ALL)02/95]
quarter page art:0001381-B
The adjusting levers for the luggage rack
[FV39900(ALL)11/94]
Leave the rear crossbar in its original back
position when you are not using it to hold
luggage to reduce aerodynamic drag and
improve fuel economy.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

165 [FV40000(ALL)11/94]
The Second Seats
[FV40100(ALL)11/94]
Your vehicle is equipped with split-folding
second seats. One or both second seatbacks can
be folded down to provide additional cargo
space.
[FV40200(ALL)02/95]
To lower the seatback:
[FV40300(ALL)02/95]
1. Lift the seatback release handle on the upper
outboard corner of the seatback.
[FV40400(ALL)02/95]
2. Fold the seatback forward until it rests on
the cushion.
*
[FV40500(ALL)11/94]
To raise the seatback:
[FV40700(ALL)02/95]
1. Lift the seatback rearward until it is in the
upright position. Push the center of the seat
until you hear it latch.
*
[FV40750(ALL)11/94]
2. Make sure the seatback is locked in position
by pushing forward and backward on it.
*
[FV40775(ALL)11/94]
RWARNING
If you do not securely latch the
seatback in the upright position, the
seatback or objects could be thrown
forward during a sudden stop or
collision, possibly injuring you or
other passengers.
File:fcfvs.ex
Update:Wed Dec 20 09:39:11 1995

193
*
[DR04451(ALL)03/95]
RWARNING
If you need to shift out of P (Park)
by using the alternate procedure
described above, it is possible that a
fuse has blown and that your
brakelamps may also not be
functional. Please refer to the chapter
titledServicing Your Vehiclein this
Owner Guide for instructions on
checking and replacing fuses. DO
NOT DRIVE YOUR VEHICLE
UNTIL YOU VERIFY THAT THE
BRAKELAMPS ARE WORKING.
%*
[DR04501(ALL)11/94]
Using a column-mounted gearshift
*
[DR04550(ALL)04/95]
If your gearshift is on the column, you can use
any of the following positions:
[DR04601(ALL)11/94]
one third page art:0000491-E
The column-mounted gearshift
*
[DR04650(ALL)01/95]
Once you place the gearshift securely into
position, gradually release the brake pedal and
use the accelerator as necessary.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

195
*
[DR06100(ALL)04/95]
When to use 1 (First)
*
[DR06200(ALL)11/94]
Use 1 (First) when added engine braking is
desired when descending steep hills.
*
[DR06220(ALL)11/94]
The automatic transaxle will shift to the proper
gear to ascend any grade without any need to
shift to 1 (First).
[DR06300(ALL)04/95]
Do not go faster than 38 mph (61 km/h) in this
gear. You can upshift from 1 (First) to D (Drive)
or from 1 (First) toj(Overdrive) at any speed.
*
[DR06400(ALL)01/95]
P (Park)
*
[DR06500(ALL)11/94]
Always come to a complete stop before you shift
into P (Park). Make sure that the gearshift is
securely latched in P (Park). This locks the
transaxle and prevents the front wheels from
rotating.
*
[DR06600(ALL)01/95]
RWARNING
Do not use the P (Park) position in
place of the parking brake. Always
set the parking brake fully and make
sure that the gearshift is securely
latched in P (Park).
*
[DR06625(ALL)03/95]
Always turn off the ignition
whenever you leave your vehicle. Do
not leave your vehicle unattended
while the engine is running.
*
[DR06650(ALL)01/95]
If you do not take these precautions,
your vehicle may move unexpectedly
and injure someone.
[DR06700(ALL)11/94]
You can tell a column-mounted gearshift is
securely latched in P (Park) if you cannot move
it without pulling it toward you and rotating it
downward.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

199 [DR06789(ALL)04/95]
If your gearshift is on the console, you can use
any of the following positions:
[DR06790(ALL)04/95]
half page art:0001028-D
The console-mounted gearshift
*
[DR06791(ALL)04/95]
The console-mounted gearshift will lock when
you turn the key to the LOCK position. When
the gearshift is in any position except P (Park),
the ignition key cannot be turned to LOCK or
removed from the steering column. TO
REMOVE THE KEY, the gearshift levermustbe
in P (Park).
*
[DR06793(ALL)11/94]
Once the gearshift is secure in the desired
position, release the brake pedal and use the
accelerator as necessary.
*
[DR06795(ALL)01/95]
R (Reverse)
*
[DR06800(ALL)02/95]
With the gearshift in the R (Reverse) position,
the vehicle will move backward. You should
always come to a complete stop before shifting
into or out of R (Reverse).
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995

201 [DR08050(ALL)11/94]
NOTE: If the O/D OFF indicator light is
flashing on and off repeatedly when
the vehicle is started or does not come
on when the O/D OFF switch is
pushed, it means that there is a
transaxle electronic system malfunction.
You should contact your dealer as soon
as possible or damage to the transaxle
could occur.
*
[DR08075(ALL)02/95]
The transaxle will be in the ªoverdrive onº
mode when the vehicle is started even if the
O/D OFF mode was selected when the vehicle
was last shut off.
*
[DR09025(ALL)01/95]
When to use 2 (Second)
[DR09050(ALL)11/94]
Use Second for start-up on slippery roads or to
give you more engine braking to slow your
vehicle on downgrades.
*
[DR09075(ALL)04/95]
When to use 1 (First)
*
[DR10025(ALL)11/94]
Use 1 (First) when added engine braking is
desired when descending steep hills.
*
[DR10050(ALL)11/94]
The automatic transaxle will shift to the proper
gear to ascend any grade without any need to
shift to 1 (First).
[DR10075(ALL)11/94]
Do not go faster than 38 mph (61 km/h) in this
gear. You can upshift from 1 (First) to D
(Overdrive) at any speed.
*
[DR10125(ALL)01/95]
P (Park)
*
[DR10150(ALL)11/94]
Always come to a complete stop before you shift
into P (Park). Make sure that the gearshift is
securely latched in P (Park). This locks the
transaxle and prevents the front wheels from
rotating.
[DR10160(ALL)04/95]
If your vehicle has a console mounted gearshift,
the gearshift indicator in the cluster is
illuminated in P (Park) only when the gearshift
button is released.
File:fcdrs.ex
Update:Wed Dec 20 09:31:15 1995