1996 Mercury Mystique water pump

202
*
[SV05575(ALL)04/95]
Cleaning the Engine
*
[SV05600(ALL)04/95]
A clean engine is more efficient because a buildup of grease and
dirt acts as an insulator, keeping the engine warmer than usual.
*
[SV05625(ALL)05/95]
n
Extreme care must be used if a power washer is used to
clean the engine. The high pressure fluid could penetrate
sealed parts and assemblies causing damage or malfunctions.
*
[SV05650(ALL)04/95]
n
In order to avoid possible cracking of the engine block or
fuel injection pump, do not spray a hot engine or injection
pump with cold water.
*
[SV05675(ALL)06/95]
n
The alternator, distributor and air intake must be covered.
Covering these components will help prevent water damage.
*
[SV05700(ALL)04/95]
n
Never wash or rinse the engine while it is running. Water
getting into the engine may cause internal damage.
*
[SV06100(ALL)03/95]
Filling the Fuel Tank
[SV06125(ALL)03/95]
Fuel Filler Door Release (If equipped)
[SV06200(ALL)04/94]
On some models, the fuel filler door cannot be opened from
outside the vehicle. To unlatch the fuel filler door, find the front
end of the release handle on the floor to the left of the driver's
seat. Push the handle down firmly until it stops and the door
pops down.
[SV06275(ALL)05/94]
7-1/2 pica art:0000601-F
The fuel filler door release
File:cdsvz.ex
Update:Fri Feb 23 11:01:54 1996

Servicing Your Mystique
215
*
[SV17850(ALL)01/95]
Check the engine coolant level in the engine coolant reservoir at
least once a month using the following guidelines.
[SV17900(ALL)01/95]
When your vehicle's engine is cool, the coolant level in the
engine coolant recovery reservoir should be at or above the
MIN mark. When the engine is hot, the coolant level should be
at the MAX mark. If the level is below the indicator mark in
either condition, coolant may need to be added.
*
[SV18000(ALL)05/95]
The coolant additives also protect the entire cooling system from
internal passageway corrosion and these additives lubricate the
water pump. The coolant should be serviced as noted in the
Maintenance Schedule and Recordbooklet.
*
[SV18100(ALL)01/95]
Adding engine coolant
*
[SV18200(ALL)05/95]
RWARNING
Do not put engine coolant in the container for the
windshield washer fluid.
*
[SV18300(ALL)05/95]
RWARNING
Never remove the coolant recovery cap while the engine
is running or hot.
[SV18500(ALL)01/95]1.
Before you remove the cap, turn the engine off and let it
cool. Even when the engine is cool, be careful when you
remove the coolant recovery cap.
[SV18600(ALL)05/95]2.
When the engine is cool, wrap a thick cloth around the cap
and turn it slowly counterclockwise to relieve the pressure.
*
[SV18700(ALL)03/95]3.
Step back while the pressure releases.
[SV18800(ALL)05/95]4.
When you are sure that all the pressure has been released,
use the cloth to turn and remove cap.
*
[SV18900(ALL)02/95]5.
Stand away from the reservoir opening. Hot steam may blow
out or hot engine coolant may even splash out.
File:cdsvz.ex
Update:Fri Feb 23 11:01:54 1996