1996 FORD RANGER child seat

Safety Restraints
37
*
[SR16090(ALL)07/95]
All child restraint systems are designed to be secured in vehicle
seats by lap belts or by the lap portion of a lap-shoulder belt.
*
[SR16100(ALL)06/95]
RWARNING
If you do not properly secure the safety seat, the child
occupying the seat may be injured during a collision or
sudden stop. An unsecured safety seat could also injure
other passengers.
*
[SR16200(ALL)08/95]
RWARNING
Carefully follow all of the manufacturer's instructions
included with the safety seat you put in your vehicle. If
you do not install and use the safety seat properly, the
child may be injured in a sudden stop or collision.
*
[SR16250(ALL)06/95]
RWARNING
Seatbacks should be upright for use with child safety
seats.
*
[SR16275(ALL)07/95]
RWARNING
Always keep the buckle release button pointing upward
and away from the child seat, with the tongue between
the child seat and the release button as shown in the
following illustration.
File:03unsrr.ex
Update:Wed May 1 13:43:56 1996

38
[SR16280(ALL)06/95]
17-1/2 pica
art:0011286-A%*
[SR18400(ALL)06/95]
Attaching Safety Seats With Tether Straps
*
[SR18410(ALL)06/95]
General Instructions
*
[SR18413(ALL)06/95]
Some manufacturers make safety seats that include a tether
strap that goes over the back of the vehicle seat and attaches to
an anchoring point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of your child safety
seat for information about ordering a tether strap.
*
[SR18415(R )06/95]
You can attach a tether strap anchor bracket to the cab inner
back panel by using a tether anchor kit (613D74) available at no
charge from any Ford dealer.
[SR18420(ALL)09/95]
Read and follow the instructions provided with the kit carefully,
for installation of the child tether strap anchor.
File:03unsrr.ex
Update:Wed May 1 13:43:56 1996

Safety Restraints
39
[SR18501(ALL)09/95]
Follow the child seat manufacturer's instructions to attach the
tether strap to the tether bracket.
*
[SR18950(ALL)06/95]
RWARNING
Only use the tether attachment hole locations shown in
the illustrations. The tether anchor may not perform
properly if the wrong mounting location is used.
*
[SR19595(R )05/95]
In Super Cabs equipped with Center Facing Jump Seats, the
tether strap anchor bracket should be installed only at the center
of the cab's back panel with the child seat in the front center
seating position. Installing an anchor bracket at the right rear of
the cab may increase risk of injury to an occupant of the right
rear center facing jump seat in the event of a collision or
sudden stop. If a tethered child seat is installed in the right
front seating position, secure the tether strap to the webbing of
the buckled right rear lap belt.
*
[SR19600(R )05/95]
RWARNING
Do not install a child seat in a center facing jump seat.
%*
[SR19700(ALL)07/95]
Safety Belts for Children
*
[SR19800(ALL)07/95]
Children who are too large for child safety seats should always
wear safety belts. (See instructions with your child seat, or
contact its manufacturer, to determine maximum size of child
that will safely fit in the seat.)
*
[SR19900(ALL)07/95]
RWARNING
If safety belts are not properly worn and adjusted as
described, the risk of serious injury to the child in a
collision will be much greater.
File:03unsrr.ex
Update:Wed May 1 13:43:56 1996

40
*
[SR20000(ALL)07/95]
If the shoulder belt portion of one of the lap and shoulder belts
can be positioned so that it does not cross or rest in front of the
child's face or neck, the child should wear the lap and shoulder
belt. Moving the child closer to the center of the vehicle may
help provide a good shoulder belt fit.
*
[SR20050(ALL)07/95]
To improve the fit of lap and shoulder belts on children who
have outgrown child safety seats, Ford recommends use of a
belt-positioning booster seat that is labelled as conforming to all
Federal motor vehicle safety standards. Belt-positioning booster
seats raise the child and provide a shorter, firmer seating
cushion that encourages safer seating posture and better fit of
lap and shoulder belts on the child. A belt-positioning booster
should be used if the shoulder belt rests in front of the child's
face or neck, or if the lap belt does not fit snugly on both
thighs, or if the thighs are too short to let the child sit all the
way back on the seat cushion when the lower legs hang over
the edge of the seat cushion. You may wish to discuss the
specific needs of your child with your pediatrician.
*
[SR20200(ALL)07/95]
Lap belts and the lap belt portion of lap and shoulder belts
should always be worn snugly and below the hips, touching the
child's thighs.
*
[SR20300(ALL)08/95]
RWARNING
To reduce the risk of serious injury in a collision,
children should always ride with the seatback upright.
File:03unsrr.ex
Update:Wed May 1 13:43:56 1996

Features
115
*
[FV26300(ALL)08/95]
RWARNING
To reduce the risk of serious injury in a collision,
children should always ride with the seatback upright.
[FV26400(ALL)08/94]
Reclining Bucket Seats (If equipped)
[FV26500(R )06/95]
If your vehicle is equipped with the optional reclining bucket
seat, you can tilt the seatback up to 30 degrees rearward.
*
[FV26600(R )06/95]1.
On the side of the seat, find the handle for the recliner.
*
[FV26700(R )08/95]2.
Lift the handle up and hold it in place.
*
[FV26800(R )06/95]3.
Lean against the back of the seat and adjust it to the position
you want.
*
[FV26900(R )06/95]4.
Release the handle to lock the seatback in position.
*
[FV27001(R )06/95]5.
To return the seatback to upright position, lift the handle
and lean forward. Then release the handle.
[FV27751(ALL)08/94]
Lifting the recliner handle of an unoccupied seat will allow the
seat back to fold forward for access to the rear. Pushing the seat
back with the release handle raised returns the seat back to the
upright position.
File:08unfvr.ex
Update:Wed May 1 13:48:36 1996

Features
117
*
[FV40301(R )05/95]
RWARNING
Do not install a child seat in a center facing jump seat.
[FV46005(ALL)08/94]
Tilt Slide Seat (If equipped)
[FV46010(R )05/95]
SuperCab only
[FV46020(ALL)08/94]
With the front seatback tilted forward, the tilt slide seat can be
moved to provide additional entry space to access the rear seat
compartment of the vehicle.
*
[FV46025(ALL)05/94]
To operate the tilt slide seat:
[FV46030(ALL)08/94]1.
Lift the seatback release lever on the outboard side of the
seat cushion to unlock the slide mechanism and seatback.
*
[FV46035(ALL)03/93]2.
Push the seat assembly forward to provide entry space to the
rear seat compartment of the vehicle.
*
[FV46037(ALL)08/94]
RWARNING
Do not place objects behind or under the front seat
which can prevent the seat from returning to the locked
position.
*
[FV46038(R )08/95]
RWARNING
A seatback which is folded forward even a small degree
may not lock properly in the event of a sudden stop or
collision.
[FV46040(ALL)08/94]3.
With the seatback still forward, using the seat cushion push
the seat rearward to the desired position and return the
seatback to its upright position. This will lock the seat track.
[FV46043(ALL)09/95]
NOTE: Whenever the seatback is returned to the upright
position, the seat will lock in that seat position.
File:08unfvr.ex
Update:Wed May 1 13:48:36 1996

Index
349
A
Accessory position on the ignition............. 41
Accessory power source, power point outlet....... 126
Additives, engine oil.................. 275
Air bag supplemental restraint system
and child safety seats................. 36
description.................... 25,30
disposal....................... 34
driver air bag................... 25,30
indicator light..................... 58
operation....................... 30
passenger air bag................... 30
proper seating.................... 27
service and information labels............. 30
tone generator.................. 31,34
wearing safety belts.................. 26
Air cleaner filter
location...................... 262
specifications.................... 330
Alarm, activating remote personal............ 104
Antenna, radio (see Electronic sound system).....127, 152
Antifreeze (see Engine coolant)............. 278
Anti-lock brake system (ABS)
description..................... 177
noise........................ 179
see also Brake.................... 177
Anti-theft system
arming the system.................. 107
description..................... 107
disarming an untriggered system........... 108
disarming a triggered system............. 108
triggering...................... 107
Appeals (see Dispute settlement board)......... 243
Assistance (see Customer assistance)........... 241
File:unixr.ex
Update:Wed May 1 13:58:05 1996

351
Index
Brakes (continued)
fluid, checking and adding.............. 304
fluid, refill capacities................ 304
fluid, specifications................. 331
front disc...................... 177
if brakes do not grip well.............. 181
master cylinder................... 304
new brake linings................... 5
noise......................177, 181
parking...................... 182
power braking................... 177
rear anti-lock.................... 178
servicing....................181, 304
stopping distances................182, 184
trailer....................... 214
when storing your vehicle.............. 336
Brake-shift interlock.................. 157
Break-in period..................... 5
Brights (high beams)................. 67,88
Bulbs, replacing.................... 317
halogen...................... 318
headlamps..................... 318
C
Canada, customer assistance.............. 248
Canada, warranty information.............. 3
Carbon monoxide in exhaust............... 50
Car seats for children (see Child safety seats)....... 36
Cassette tape player (see Electronic sound system) . . 133, 149
Catalytic converter................... 323
Chains, tires...................... 295
Changing a tire.................... 223
Charging system gauge................. 64
Charging system warning light.............. 62
Child safety restraints
child safety belts................... 39
child safety seats................... 36
File:unixr.ex
Update:Wed May 1 13:58:05 1996