Page 35 of 298
33 [SR16975(ALL)05/95]
half page art:0032387-B
Checking the retractor
[SR16980(ALL)05/95]
8. Check to make sure that the child seat or
infant carrier is properly secured prior to
each use. If the belt is not locked, repeat
steps 4 through 7.
[SR16990(ALL)05/95]
NOTE: To remove the retractor from automatic
lock mode, allow seat belt retract fully
to its stowed position and the retractor
will automatically switch back to the
vehicle sensitive locking mode for
normal adult usage.
File:prsrp.ex
Update:Fri Jun 23 19:39:12 1995
Page 49 of 298
47 [ST10025(ALL)01/95]
three fourths page art:0030295-I
The location of the fuel pump shut-off switch
*
[ST10030(ALL)05/95]
RWARNING
If you see or smell fuel, do not reset the
switch or try to start your vehicle. Have
all the passengers get out of the vehicle
and call the local fire department or a
towing service.
File:prstp.ex
Update:Fri Jun 23 19:38:23 1995
Page 52 of 298
51
Warning Lights and
Gauges
*
[LG00600(ALL)01/95]
The instrument panel (dashboard) on your
vehicle is divided into several different sections.
The illustrations on the following pages show
the major parts of the instrument panel that are
described in this chapter. Some items shown
may not be on all vehicles.
*
[LG00700(ALL)06/93]
In your vehicle, the warning lights and gauges
are grouped together on the instrument panel.
We call this grouping a cluster.
[LG00750(ALL)03/95]
To clean the lenses on your instrument panel,
use Ford Glass Cleaner and a soft cloth. Never
use paper towels or abrasive cleaners; they can
scratch the lenses.
*
[LG00800(ALL)01/95]
Your vehicle has a mechanical cluster.
File:prlgp.ex
Update:Fri Jun 23 19:38:06 1995
Page 60 of 298
![FORD PROBE 1996 2.G Owners Manual 59
*
[LG05600(ALL)05/95]
This light comes on briefly when you turn the
ignition to the ON position, but should turn off
when the engine starts. If the light does not
come on when you turn the ignition FORD PROBE 1996 2.G Owners Manual 59
*
[LG05600(ALL)05/95]
This light comes on briefly when you turn the
ignition to the ON position, but should turn off
when the engine starts. If the light does not
come on when you turn the ignition](/manual-img/11/5320/w960_5320-59.png)
59
*
[LG05600(ALL)05/95]
This light comes on briefly when you turn the
ignition to the ON position, but should turn off
when the engine starts. If the light does not
come on when you turn the ignition to the ON
position or if it comes on and stays on when
you are driving, have your vehicle serviced as
soon as possible. This indicates a possible
problem with one of the engine's emission
control systems.You do not need to have your
vehicle towed in.
*
[LG05800(ALL)05/95]
If the light turns on and off briefly while you
are driving, it means that the condition is no
longer present.
[LG05885(ALL)06/93]
O/D OFF Light (If equipped)
[LG05886(ALL)05/95]
This light tells you that the overdrive off (O/D
OFF) button on the shift selector has been
pushed. When the light is on, the transaxle will
not shift into overdrive. Depressing the button
on the shift selector again will return the vehicle
to ªoverdrive onº mode. The transaxle will be in
the ªoverdrive onº mode when the vehicle is
started even if the O/D OFF mode was selected
when the vehicle was last shut off.
[LG05888(ALL)06/93]
If the light does not come on when the O/D
OFF button is pressed, or if the light flashes
when you are driving, have your vehicle
serviced at the first opportunity. If this condition
persists, damage could occur to the transaxle.
[LG05889(ALL)01/94]
one inch art:0032053-A
Overdrive OFF light
File:prlgp.ex
Update:Fri Jun 23 19:38:06 1995
Page 69 of 298
![FORD PROBE 1996 2.G Owners Manual 68
*
[IP05800(ALL)12/91]
Tips for Controlling the Temperature in
Your Vehicle
*
[IP05900(ALL)03/94]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for FORD PROBE 1996 2.G Owners Manual 68
*
[IP05800(ALL)12/91]
Tips for Controlling the Temperature in
Your Vehicle
*
[IP05900(ALL)03/94]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for](/manual-img/11/5320/w960_5320-68.png)
68
*
[IP05800(ALL)12/91]
Tips for Controlling the Temperature in
Your Vehicle
*
[IP05900(ALL)03/94]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for warmer air and toward the blue area
for cooler air.
*
[IP06000(ALL)03/94]
q
If you drive with the fan off and the
windows closed, the windows may fog up.
To prevent fogging:
[IP06150(ALL)04/95]
1. Set the function selector control to VENT,
MIX, FLOOR or theVposition.
*
[IP06200(ALL)01/89]
2. Set the desired temperature.
*
[IP06300(ALL)01/89]
3. Set the desired fan speed.
*
[IP06400(ALL)12/91]
q
Do not put objects under the front seats that
will interfere with the flow of air to the back
seats.
*
[IP06500(ALL)12/03]
q
Remove any snow, ice, or leaves from the
area below the windshield on the outside of
your vehicle. They could block the air intake.
*
[IP06600(ALL)06/93]
Air Conditioning System (If equipped)
[IP06850(ALL)01/95]
Operate the air conditioning by using the climate
controls on the center of the instrument panel.
[IP06900(ALL)08/91]
one third page art:0032041-A
Air conditioning controls
File:pripp.ex
Update:Fri Jun 23 19:37:35 1995
Page 80 of 298
80 [SC01300(ALL)02/92]
half page art:0032085-BManual headlamp retractors located behind the headlamps
*
[SC02075(ALL)05/95]
High Beams and Flashing the Lamps
*
[SC02080(ALL)05/95]
To turn on the high beams, turn the headlamp
control knob to the headlamp ON position and
push the turn signal lever away from you until
it latches. When the high beams are ON, the
high beam indicator light on the instrument
panel comes on.
*
[SC02085(ALL)05/95]
To turn off the high beams, pull the lever
toward you until it latches. The high beam
indicator light turns off.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995
Page 81 of 298
![FORD PROBE 1996 2.G Owners Manual 81
*
[SC02090(ALL)05/95]
Flashing the Lights
*
[SC02091(ALL)06/95]
To flash the headlamps, pull the lever toward
you for a moment and then release it. The
headlamps will flash whether the headlamp
kno FORD PROBE 1996 2.G Owners Manual 81
*
[SC02090(ALL)05/95]
Flashing the Lights
*
[SC02091(ALL)06/95]
To flash the headlamps, pull the lever toward
you for a moment and then release it. The
headlamps will flash whether the headlamp
kno](/manual-img/11/5320/w960_5320-80.png)
81
*
[SC02090(ALL)05/95]
Flashing the Lights
*
[SC02091(ALL)06/95]
To flash the headlamps, pull the lever toward
you for a moment and then release it. The
headlamps will flash whether the headlamp
knob is in the on or off position.
[SC02093(ALL)08/91]
quarter page art:0032034-A
Highbeam and flash-to-pass operation
[SC02095(ALL)11/91]
If the headlamps are retracted when you pull
the lever toward you, they will pop up and
flash.
%*
[SC02097(ALL)05/95]
Cleaning the Exterior Lamps
*
[SC02098(ALL)05/95]
Do not use dry paper towel, chemical solvents
or abrasive cleaners to clean the lamps, as these
may cause scratches or crack the lamps.
%
*
[SC02100(ALL)03/95]
Hazard Flasher
*
[SC02200(ALL)09/93]
To alert other drivers to hazardous situations,
press the flasher switch on the top of the
steering column. All the turn signals will flash
on and off at the same time. The flashers will
also operate while the brake pedal is applied. To
turn the hazards off, press the switch again.
*
[SC02300(ALL)01/94]
The flashers work whether your vehicle is
running or not. The flashers will work for up to
two hours when the battery is fully charged and
in good condition. They will not drain the
battery excessively unless they are left on for an
extended period of time.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995
Page 85 of 298
85 [SC04220(ALL)11/91]
Interval Wipers (If equipped)
[SC04240(ALL)08/91]
In addition to two speed wipers, your vehicle
may have wipers that you can set to operate at
varying intervals. For example, you can set the
interval so they wipe less often when it drizzles
and more often in heavier rain.
[SC04260(ALL)01/92]
quarter page art:0032035-B
Variable interval wiper control
[SC04280(ALL)11/91]
To set the interval wipers, pull the lever down
to the first position. Turn the ring on the lever
to the frequency of wiper operation you desire.
*
[SC04300(ALL)05/95]
Windshield Washer
[SC04425(ALL)01/92]
To clean the windshield, pull the wiper lever
toward you. Washer fluid sprays until the lever
is released.
[SC04450(ALL)01/92]
quarter page art:0032057-B
Windshield washer/control
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995