1996 FORD EXPLORER light

138
[SC05502(ALL)10/94]
Gearshift Lever (Automatic transmission
only)
[SC05504( X)08/94]
The gearshift lever on your Explorer is mounted on the steering
column. On the end of the gearshift lever is the Overdrive
On/Off button. For additional information about the gearshift
lever and the Overdrive On/Off button, see theDriving Your
Explorerchapter.
[SC05508(ALL)10/94]
7-1/2 pica art:0021255-A*
[SC05510(ALL)11/93]
OVERDRIVE OFF Lamp
[SC05512(ALL)03/95]
This lamp indicates the operating range of the transmission.
This lamp illuminates when the O/D ON/OFF button is
depressed. For additional information, refer to theWarning
Lights and Gaugeschapter.
[SC05514(ALL)07/95]
6 pica art:0021226-BFile:07unscx.ex
Update:Thu Feb 29 09:06:35 1996

Steering Column Controls
139
%*
[SC05516(ALL)03/95]
Hazard Flasher
*
[SC05520(ALL)04/95]
The hazard flasher is used to alert other drivers to hazardous
situations.
*
[SC05527(ALL)10/94]
The flashers will flash and the high-mount brakelamp will stay
on steadily (not flash) with the brake pedal depressed.
*
[SC05530(ALL)08/95]
The flashers work whether your vehicle is running or not. The
flashers work for up to two hours when the battery is fully
charged and in good condition without draining the battery
excessively. If the flashers run for longer than two hours or if
the battery is not fully charged, the battery power can be
drained.
*
[SC05540(ALL)09/93]
To use the hazard flasher:
*
[SC05550(ALL)10/92]1.
Push in the flasher button; it will pop out and the lamps will
begin to flash.
*
[SC05560(ALL)10/92]2.
To stop the flashers, push in the flasher button again.
*
[SC05562(ALL)08/95]
NOTE: The flasher button will be sticking up slightly higher
when on than when off.
[SC05590(ALL)10/94]
10-1/2 pica
art:0020079-D
Hazard flasher
File:07unscx.ex
Update:Thu Feb 29 09:06:35 1996

Steering Column Controls
143
*
[SC08700(ALL)08/95]
RWARNING
Do not use the speed control in heavy traffic or on roads
that are winding, slippery, or unpaved.
*
[SC08801(ALL)05/95]
In mountainous areas, at higher elevations, or when pulling a
trailer, the speed control may not be able to maintain the preset
speed with the transmission in
j(Overdrive).
*
[SC08850(ALL)06/92]
If your vehicle comes with a 5-speed manual transmission, you
may prefer to drive in 4 (Fourth) gear, in mountainous areas or
at high altitudes, to improve speed control performance.
*
[SC09275(ALL)12/91]
In order to downshift (with a manual transmission) with the
speed control operating, you must press either the brake or
clutch pedal long enough to disengage the speed control. Wait a
second before depressing the clutch again and making the shift
so that the speed control can fully return to the idle position.
*
[SC09325(ALL)05/95]
RWARNING
Do not shift the transmission into N (Neutral) with the
speed control on.
[SC09350(ALL)03/95]
To maintain a preset speed under the above conditions, with
electronically controlled transmissions Ð press the Transmission
Control Switch (TCS). The indicator light will turn on and
illuminate the words ªO/D OFF.º This will cancel ªOverdrive.º
You can press the Transmission Control Switch (TCS) on or off
at any speed. For the best fuel economy during normal driving
conditions, press the Transmission Control Switch (TCS) to turn
off the light. This allows overdrive operation.
File:07unscx.ex
Update:Thu Feb 29 09:06:35 1996

Steering Column Controls
145
*
[SC10250(ALL)10/94]
n
TAP-UP Ð This allows you to increase your current speed in
increments of 1 mph (1.6 km/h) by a momentary tap of the
SET-ACCEL switch. Multiple taps of the SET-ACCEL switch
will increase your vehicle speed 1 mph (1.6 km/h) for each
tap. For example, if you are currently set at 60 mph
(96 km/h) and tap the SET-ACCEL switch 5 times your
vehicle speed will increase and set at 65 mph (104 km/h).
*
[SC10300(ALL)06/95]
Turning the Speed Control Off
*
[SC10400(ALL)06/95]
You can cancel the speed control while you are driving.
[SC10550(ALL)08/94]
n
Press the OFF switch. The speed control is off. If you want
to resume speed control, press the ON switch and reset the
speed control by pressing the SET ACCEL switch.
[SC10600(ALL)06/94]
n
Press the brake or clutch pedal slightly. The speed control is
suspended, but you can reset it by pressing SET ACCEL or
return to the previous set speed with the RSM switch.
*
[SC10800(ALL)10/95]
In addition, the speed control is turned off each time you turn
the vehicle ignition off.
*
[SC11100(ALL)11/89]
Driving uphill or on a steep grade
*
[SC11200(ALL)05/95]
When the speed control is on, your vehicle may significantly
drop speed when driving uphill, especially with a heavy load. If
the speed drops more than 8 to 14 mph (15 - 25 km/h) the
automatic speed control will, by design, be canceled. You may
have to temporarily resume manual speed control while driving
up a steep grade in order to maintain the speed you desire.
[SC11300(ALL)05/95]
If the speed control ªdropped outº after your climb is
completed, the speed of your light truck can be reset with the
SET ACCEL switch, or returned to the previous set speed with
the RSM switch, as long as you are driving over 30 mph
(50 km/h).
File:07unscx.ex
Update:Thu Feb 29 09:06:35 1996

146
%*
[SC11500(ALL)08/95]
Cancelling and Resuming a Set Speed
*
[SC11600(ALL)06/95]
If you press the brake pedal, the speed control is cancelled. You
can return to the speed you set by using the RSM switch, as
long as you did not press the OFF switch.
*
[SC11700(ALL)08/95]
To resume the speed you had before, you must be driving at
least 30 mph (50 km/h).
*
[SC11800(ALL)05/93]
Press and release the RSM switch. Your vehicle gradually
returns to the previously set speed and then maintains it.
*
[SC11850(ALL)03/95]
RWARNING
If your vehicle has speed control, do not use it on
slippery roads. You could lose control of your vehicle
and could injure someone.
[SC12000( X)06/95]
Speed Control Indicator (If equipped)
[SC12100( X)08/94]
A SPEED CONTROL light is displayed in the instrument cluster
when the speed control system is engaged. The display will turn
off when the brake pedal is pressed or if speed control is shut
off.
*
[SC12200( X)05/95]
This display does not indicate any problems with the speed
control, but is simply a convenient way of knowing when it is
active.
File:07unscx.ex
Update:Thu Feb 29 09:06:35 1996

Features
151
[FV11000( X)05/95]
Cargo Area Shade (If equipped)
[FV11201( X)03/91]
This removable shade hides cargo and also secures lightweight
objects in the cargo area of your vehicle.
*
[FV11401( X)03/91]
To install the shade:
*
[FV11601( X)05/90]1.
Position the shade in the mounting brackets located behind
the rear seat on each rear trim panel.
[FV11700( X)05/95]
The tongue end of the shade should face the rear of your
vehicle.
*
[FV11801( X)03/93]2.
Grasp the end of the shade and pull it toward you.
*
[FV12001( X)05/90]3.
Hook the sides of the outstretched shade to notch in the rear
trim panels near the liftgate opening.
[FV12200( X)05/95]
RWARNING
To avoid possible injury during a sudden stop or a
collision, the cover should be attached to the brackets,
when not in use.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

156
%*
[FV15203( X)09/95]
Using the Keyless Entry System (If equipped)
*
[FV15205( X)02/95]
If your vehicle has the keyless entry system, you can lock or
unlock the vehicle doors without using a key. The buttons for
the system are near the outside door handle on the driver's
side. See alsoRemote Entry Systemwhich follows this
description.
[FV15207( X)02/95]
10-1/2 pica
art:0021158-A
Keyless entry buttons
*
[FV15209( X)02/95]
When you bought your vehicle, you were given a computer
code that operates the system for your vehicle. For your
convenience, we have duplicated this code in two places.
*
[FV15211( X)09/95]
The code is:
*
[FV15213( X)09/95]
n
on your owner's wallet card found in the glove compartment
*
[FV15217( X)02/95]
n
taped to the computer module
*
[FV15219( X)05/95]
When you use this entry system, the illuminated entry system
turns on the interior lights for 25 seconds and the buttons on
the keypad light up for 5 seconds. Do not push the buttons
with a key, ballpoint pen, pencil or any other hard object. These
objects could damage the buttons.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

158
%*
[FV15301( X)09/95]
Unlocking the doors with the keyless entry system
*
[FV15303( X)02/95]
You must unlock the driver's door before you unlock any of the
other doors. If you let more than five seconds pass between
pressing numbers, the system shuts down, and you have to
enter the code again. The system has shut down if the keypad
light is out. If the keyless entry system does not work properly,
use the key or transmitter(s) to lock and unlock the doors.
*
[FV15305( X)09/95]1.
To unlock the driver's door, enter the factory code or your
personal code. All codes have five numbers. After you press
the fifth number, the driver's door unlocks.
[FV15307( X)04/95]2.
To unlock the passenger's door(s), press the 3/4 button
within five seconds of unlocking the driver's door or re-enter
the code to open the driver's door, then press 3/4.
*
[FV15309( X)09/95]
Locking the doors with the keyless entry system
*
[FV15311( X)09/95]
Along with unlocking your doors, you can use the keyless entry
system to lock the doors. You can also use the Autolock feature
to automatically lock the doors after you get in the vehicle.
*
[FV15313( X)02/95]
To lock all of the doors, press 7/8 and 9/0 at the same time. It
is not necessary to first enter the keypad code. This will arm
your factory installed anti-theft system, if so equipped.
*
[FV15320( X)05/95]
Arming, disarming and resetting your anti-theft
system (If equipped) from the keyless entry pad
*
[FV15330( X)05/95]
If your vehicle is equipped with the optional factory installed
anti-theft system, the keyless entry system will arm it when you
use the 7/8 and 9/0 keys to lock the doors, and will disarm or
reset a triggered anti-theft alarm when you enter in the five
digit code to unlock the driver's door.
*
[FV15340( X)09/95]
NOTE: Doors and the liftgate must be fully closed for the
anti-theft system to arm. Refer to theAnti-Theft
Systemsection in this chapter for more details.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996