1996 FORD EXPLORER heating

352
*
[SV17275(ALL)07/95]
RWARNING
Continuous contact with USED motor oil has caused
cancer in laboratory mice.
*
[SV17285(ALL)07/95]
Protect your skin by washing with soap and water.
%*
[SV17300(ALL)03/95]
Engine Coolant
%*
[SV17400(ALL)09/95]
Checking the engine coolant
*
[SV17500(ALL)09/95]
NOTE: Be sure to read and understandPrecautions When
Servicing Your Vehicleat the beginning of this chapter.
*
[SV17700(ALL)08/95]
Your vehicle's engine coolant protects the engine from
overheating in the summer and from freezing in the winter.
Check the level of the engine coolant at least once a month, but
preferably each time you stop for fuel. Simply look at the
engine coolant recovery reservoir located in the engine
compartment. To locate this reservoir, see the diagram of your
vehicle's engine underEngine typesin this chapter.
*
[SV17750(ALL)03/95]
If the engine coolant has not been checked for a long period of
time the engine coolant reservoir may eventually empty. If the
engine coolant reservoir empties, check the engine coolant level
in the radiator. Read the following warnings before removing
the radiator cap. If it is necessary to fill the radiator, refer to the
Engine Coolant Refill Procedurein this chapter for instructions.
*
[SV17760(ALL)09/95]
RWARNING
Never remove the coolant recovery cap while the engine
is running or hot.
*
[SV17765(ALL)09/95]1.
Before you remove the radiator cap, turn the engine off and
let it cool. Even when the engine is cool, be careful when
you remove the radiator cap.
*
[SV17770(ALL)09/95]2.
When the engine is cool, wrap a thick cloth around the cap
and turn it slowly counterclockwise to the first stop.
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

Servicing Your Explorer
357
*
[SV22500(ALL)10/89]5.
Finally, check the radiator and add more engine coolant if
needed, following the procedures noted above. Reinstall the
radiator cap securely, when finished.
*
[SV22525(ALL)05/90]6.
If more engine coolant is necessary, fill the overflow
reservoir to the appropriate level marked on the bottle.
*
[SV22610( X)08/95]
NOTE: Due to air being trapped in the 4.0L engine cooling
system, it is not unusual to experiencea4to7ounce
(120 to 210 ml) coolant loss up to 7,500 miles
(12,000 km) after initial system fill.
*
[SV22620( X)06/95]
In order to bleed the cooling system properly after initial fill
with coolant, it might need up to five cycles of:
*
[SV22630( X)06/95]
n
heating up the system (thermostat open)
*
[SV22640( X)06/95]
n
making sure coolant is at least up to the cold fill mark of
overflow bottle
*
[SV22650( X)06/95]
n
letting the coolant cool down (engine coolant temperature
gauge below the N of NORMAL)
*
[SV22660( X)06/95]
n
topping off the coolant overflow bottle to the cold fill
mark
*
[SV22680( X)06/95]
If coolant loss continues after 7,500 miles (12,000 km), consult
your Ford Dealer.
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996