Page 18 of 268
![FORD ASPIRE 1996 1.G Owners Manual 16
*
[SR09470(ALL)07/95]
NOTE: When the combination lap/shoulder
belt is unbuckled and allowed to
retract completely, the retractor will
switch to the vehicle sensitive
(emergency) locking mode. See t FORD ASPIRE 1996 1.G Owners Manual 16
*
[SR09470(ALL)07/95]
NOTE: When the combination lap/shoulder
belt is unbuckled and allowed to
retract completely, the retractor will
switch to the vehicle sensitive
(emergency) locking mode. See t](/manual-img/11/4753/w960_4753-17.png)
16
*
[SR09470(ALL)07/95]
NOTE: When the combination lap/shoulder
belt is unbuckled and allowed to
retract completely, the retractor will
switch to the vehicle sensitive
(emergency) locking mode. See the
detailed instructions underSafety Seats
for Childrenin this chapter.
%*
[SR09475(ALL)07/95]
Safety Belt Extension Assembly
*
[SR09478(ALL)07/95]
For some people, the safety belt may be too
short even when it is fully extended. You can
add about eight inches (20 cm) to the belt length
with a safety belt extension assembly (part
number 611C22). Safety belt extensions are
available at no cost from your dealer.
*
[SR09482(ALL)07/95]
RWARNING
Failure to follow these instructions will
affect the performance of the safety belts
and increase the risk of personal injury.
*
[SR09484(ALL)07/95]
Safety Belt Maintenance
*
[SR09486(ALL)07/95]
Check the safety belt systems periodically to
make sure that they work properly and are not
damaged.
%*
[SR09488(ALL)07/95]
All safety belt assemblies, including retractors,
buckles, front seat belt buckle support assemblies
(slide bar) (if equipped), child safety seat tether
bracket assemblies (if equipped), and attaching
hardware, should be inspected after any
collision. Ford recommends that all safety belt
assemblies used in vehicles involved in a
collision be replaced. However, if the collision
was minor and a qualified technician finds that
the belts do not show damage and continue to
operate properly, they do not need to be
replaced. Safety belt assemblies not in use
during a collision should also be inspected and
replaced if either damage or improper operation
is noted.
File:03icsrf.ex
Update:Wed Jan 24 14:30:01 1996
Page 117 of 268
![FORD ASPIRE 1996 1.G Owners Manual 116
*
[AS35200(ALL)06/95]
Common Radio Reception Conditions
*
[AS35300(ALL)02/95]
Several conditions prevent FM reception from
being completely clear and noise-free, such as
the following:
*
[AS35400( FORD ASPIRE 1996 1.G Owners Manual 116
*
[AS35200(ALL)06/95]
Common Radio Reception Conditions
*
[AS35300(ALL)02/95]
Several conditions prevent FM reception from
being completely clear and noise-free, such as
the following:
*
[AS35400(](/manual-img/11/4753/w960_4753-116.png)
116
*
[AS35200(ALL)06/95]
Common Radio Reception Conditions
*
[AS35300(ALL)02/95]
Several conditions prevent FM reception from
being completely clear and noise-free, such as
the following:
*
[AS35400(ALL)04/95]
1. Distance/Strength
*
[AS35500(ALL)02/95]
The strength of the FM signal is directly related
to the distance the signal must travel. The
listenable range of an average FM signal is
approximately 25 miles (40 kilometers). Beyond
this distance, the radio is operating in a fringe
area and the signal becomes weaker.
*
[AS35550(ALL)06/90]
NOTE: Always make sure your antenna
(whether you have a power antenna or
a manually adjustable antenna) is fully
extended to the maximum length for
proper reception. If your antenna is not
fully extended, you may experience
signal loss while traveling in fringe
reception areas.
*
[AS35600(ALL)04/95]
2. Terrain
*
[AS35700(ALL)02/95]
The terrain (hilly, mountainous, tall buildings) of
the area over which the signal travels may
prevent the FM signal from being noise-free.
*
[AS35900(ALL)01/95]
If there is a building or large structure between
the antenna and station, some of the signal
ªbendsº around the building, but certain spots
receive almost no signal. Moving out of the
ªshadowº of the structure will allow the station
to return to normal.
*
[AS36000(ALL)01/95]
When the radio waves are reflected off objects or
structures, the reflected signal cancels the normal
signal, causing the antenna to pick up noise and
distortion. Cancellation effects are most
prominent in metropolitan areas, but also can
become quite severe in hilly terrain and
depressed roadways.
File:09icasf.ex
Update:Wed Jan 24 14:52:32 1996
Page 162 of 268
![FORD ASPIRE 1996 1.G Owners Manual 162 %
*
[HS06450(ALL)09/95]
Mediation/Arbitration Program
*
[HS06455(ALL)09/95]
In those cases where you continue to feel that
the efforts by Ford and the dealer to resolve a
factory-related vehicle s FORD ASPIRE 1996 1.G Owners Manual 162 %
*
[HS06450(ALL)09/95]
Mediation/Arbitration Program
*
[HS06455(ALL)09/95]
In those cases where you continue to feel that
the efforts by Ford and the dealer to resolve a
factory-related vehicle s](/manual-img/11/4753/w960_4753-161.png)
162 %
*
[HS06450(ALL)09/95]
Mediation/Arbitration Program
*
[HS06455(ALL)09/95]
In those cases where you continue to feel that
the efforts by Ford and the dealer to resolve a
factory-related vehicle service concern have been
unsatisfactory, Ford of Canada participates in an
impartial third party mediation/arbitration
program administered by the Canadian Motor
Vehicle Arbitration Plan (CAMVAP).
*
[HS06460(ALL)09/95]
The CAMVAP program is a straight-forward and
relatively speedy alternative to resolve a
disagreement when all other efforts to produce a
settlement have failed. This procedure is without
cost to you and is designed to eliminate the
need for lengthy and expensive legal
proceedings.
*
[HS06465(ALL)09/95]
In the CAMVAP program, impartial third-party
Arbitrators conduct hearings at mutually
convenient times and places in an informal
environment. These impartial Arbitrators review
the positions of the parties, make decisions and,
where appropriate, render awards to resolve
disputes. CAMVAP decisions are fast, fair and
final as the arbitrator's award is binding on both
you and Ford of Canada.
*
[HS06470(ALL)09/95]
CAMVAP services are available in all territories
and provinces, except Quebec. For more
information, without charge or obligation, call
your CAMVAP Provincial Administrator directly
at 1-800-207-0685.
File:13ichsf.ex
Update:Wed Jan 24 14:53:26 1996