1996 FORD AEROSTAR clock

178
*
[AS07150(ALL)08/95]
How to locate a desired track on the tape
*
[AS07175(ALL)08/95]
q
Using the Automatic Music Search (ªAMSº)
[AS07200(ALL)08/95]
Press and hold the ªAMSº button (ªAMSº
will appear in the display). Then, push the
left (
h) button to rewind to the beginning
of the current selection or press the right
(
g) button to fast forward to the beginning
of the next selection.
*
[AS07225(ALL)08/95]
q
How to change the side of the tape being
played
[AS07250(ALL)08/95]
The alternate track (other side) of the tape
can be selected at any time by pushing both
fast-wind buttons (
hand
g) at the
same time.
*
[AS07275(ALL)08/95]
How to eject the tape
*
[AS07300(ALL)08/95]
To stop the tape and eject the cassette, press the
ªEJECTº button. The radio will resume playing.
*
[AS07325(ALL)08/95]
Using the DolbyHB noise reduction feature
*
[AS07350(ALL)08/95]
Push thek/memory preset #3 button to
activate. Push again to deactivate.
*
[AS07375(ALL)08/95]
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. ªDolbyº and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
*
[AS07400(ALL)08/95]
How to view the clock mode
*
[AS07425(ALL)08/95]
Press the ªCLOCKº button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximatedly ten seconds before changing
back to the clock mode.
File:09cpasa.ex
Update:Tue Aug 29 17:42:51 1995

179
*
[AS07450(ALL)08/95]
How to set the clock
*
[AS07475(ALL)08/95]
1. Turn the radio on.
*
[AS07500(ALL)08/95]
2. Press and hold in the ªCLOCKº button,
press the ªSEEKº button left (
b) to advance
the hours and right (
a) to advance the
minutes.
*
[AS07525(ALL)08/95]
NOTE: The clock displays 12-hour time with
no AM/PM indications.
*
[AS07550(ALL)08/95]
Tips on Caring for the Cassette Player and
Tapes
*
[AS07575(ALL)08/95]
In order to keep your cassette tape player
performing the way it was meant to, read and
follow these simple precautions:
*
[AS07600(ALL)08/95]
q
Using a Ford Cassette Cleaning Cartridge to
clean the tape player head after 10-12 hours
of play will help maintain the best playback
sound and proper tape operation.
*
[AS07625(ALL)08/95]
q
Only cassettes that are 90 minutes long or
less should be used. Tapes longer than 90
minutes are thinner and subject to breakage
or may jam the tape player mechanism.
*
[AS07650(ALL)08/95]
q
Protect cassettes from exposure to direct
sunlight, high humidity and extreme heat or
cold. If they are exposed to extreme
conditions, allow them to reach a moderate
temperature before playing.
*
[AS07675(ALL)08/95]
q
If a tape is loose inside the cassette, tighten it
before playing by putting your finger or a
pencil into one of the holes and turning the
hub until the tape is tight.
*
[AS07700(ALL)08/95]
q
Loose labels on cassette tapes can become
lodged in the mechanism. Remove any loose
label material before inserting a cassette.
*
[AS07725(ALL)08/95]
q
Do not leave a tape in the cassette tape
player when not in use. High heat in the
vehicle can cause the cassette to warp.
File:09cpasa.ex
Update:Tue Aug 29 17:42:51 1995

187
*
[DR06300(ALL)01/95]
Once you place the gearshift securely into
position, gradually release the brake pedal and
use the accelerator as necessary.
%*
[DR06310(ALL)01/95]
NOTE: Your vehicle is equipped with a
brake-shift interlock feature. This
feature prevents you from shifting
from P (Park) unless you have the
brake pedal depressed. (The ignition
must be in the ON position.) If you
cannot shift from P (Park) with the
brake pedal depressed:
*
[DR06320(ALL)01/95]
1. Apply the parking brake.
*
[DR06330(ALL)01/95]
2. Remove the key.
*
[DR06340(ALL)08/95]
3. Insert the key and rotate it one position
clockwise (ignition in the OFF position).
*
[DR06350(ALL)08/95]
4. Apply the brake pedal and shift to N
(Neutral). (If the vehicle is shifted back to P
[Park], you must repeat the previous steps.)
*
[DR06360(ALL)01/95]
5. Start the vehicle.
*
[DR06370(ALL)07/95]
If you need to shift out of P (Park) by using the
alternate procedure described above, it is
possible that a fuse has blown and that your
brakelamps may also not be functional. Please
refer to the chapter titledServicing Your Aerostar
in this Owner Guide for instructions on checking
and replacing fuses.
*
[DR06375(ALL)05/95]
RWARNING
DO NOT DRIVE YOUR VEHICLE UNTIL
YOU VERIFY THAT THE BRAKELAMPS
ARE WORKING.
File:10cpdra.ex
Update:Tue Aug 29 17:45:28 1995

190
*
[DR07600(ALL)01/95]
P (Park)
[DR07700(ALL)06/92]
Always come to a complete stop before you shift
into P (Park). This position locks the
transmission and prevents the rear wheels from
turning.
[DR07800(ALL)06/92]
To securely latch the gearshift in the P (Park)
position, pull it toward you, push it completely
counterclockwise against the stop, and then push
it toward the instrument panel.
*
[DR08000(ALL)06/95]
RWARNING
Always set the parking brake fully and
make sure the gearshift is securely latched
in P (Park).
*
[DR08100(ALL)06/95]
RWARNING
Never leave your vehicle unattended
while it is running.
*
[DR08500(ALL)06/94]
Forced Downshifts
[DR08600(ALL)08/95]
To gain acceleration inj(Overdrive) or Drive
(jposition with Overdrive cancelled) when
passing another vehicle, push the accelerator to
the floor. The transmission will downshift to 2
(Second) gear or to 1 (First) gear at calibrated
speeds.
*
[DR11235(ALL)03/94]
Power Braking
*
[DR11275(ALL)03/94]
Increasing the engine speed above idle without
vehicle movement (such as holding the brake) in
a forward or reverse gear causes transmission
stall.
*
[DR11285(ALL)03/94]
NOTE: Continued operation in the stall
condition can result in transmission
overheat, malfunction or fluid
expulsion.
File:10cpdra.ex
Update:Tue Aug 29 17:45:28 1995

232 [RE05400(ALL)05/94]If your vehicle is the model with a standard
length body or extended length (all models), the
temporary spare tire is stowed at the rear of the
vehicle under the body.
[RE05450(ALL)05/94]
The standard length E-4WD model spare tire is
mounted on the floor.
[RE05500(ALL)08/95]
To remove underbody temporary spare tire:
[RE05600(ALL)11/89]
1. Insert lug nut wrench into the actuator hole
and turn counterclockwise until the cable
extends to allow the spare tire to be pulled
rearward from under the vehicle.
*
[RE05700(ALL)10/94]
2. Slide the spare tire to the rear and remove
the retainer from the wheel.
[RE05800(ALL)11/89]
3. To stow cable/retainer with spare tire
removed, insert cable fitting into carrier rear
wall slot, place wheel retainer against the
carrier, and turn lug nut wrench clockwise
until slack is removed.
File:12cprea.ex
Update:Tue Aug 29 17:46:27 1995

234 [RE06000(ALL)08/95]To stow underbody temporary spare tire:
[RE06100(ALL)11/89]
1. Insert lug nut wrench into the actuator hole
and turn counterclockwise until the
cable/retainer is extended for insertion into
the wheel.
*
[RE06200(ALL)10/94]
2. Install the retainer through wheel center
with valve stem facing up.
[RE06300(ALL)11/89]
3. Rotate wrench clockwise until tire is secured.
(Raising mechanism will slip.)
*
[RE06400(ALL)03/91]
4. Check for proper seating against underbody
supports and retighten if necessary.
[RE06500(ALL)11/89]
half page art:0020266-B
Spare tire Ð underbody carrier
File:12cprea.ex
Update:Tue Aug 29 17:46:27 1995

239
*
[RE16800(ALL)12/91]
3. Use the tapered end of the lug nut wrench
to unscrew wheel ornaments attached by
retaining screws. Remove any wheel trim.
Insert the tapered end of the lug nut wrench
behind wheel covers or hubcaps and twist
off.
*
[RE16900(ALL)10/89]
4. Loosen the wheel nuts by pulling up on the
handle of the lug nut wrench about one-half
turn (counterclockwise). Do not remove the
wheel lug nuts until you raise the tire off the
ground.
[RE17000(ALL)02/95]
5. Unfold the jack handle and lock into the
jack. Use the jack handle to slide the jack
under the vehicle.
%*
[RE17100(ALL)05/95]
Removing and Replacing the Tire
%*
[RE17300(ALL)06/95]
1. Positioning the jack
[RE17400(ALL)02/89]
a. To raise a front wheel, place the jack
under a horizontal portion of the
underbody member behind the wheel, as
shown.
[RE17500(ALL)01/89]
one third page art:0020293-A
Front jacking point
File:12cprea.ex
Update:Tue Aug 29 17:46:27 1995

240 [RE17600(ALL)01/89]
b. To raise a rear wheel, place the jack
under a horizontal portion of the
underbody member ahead of the wheel
as shown.
[RE17700(ALL)01/89]
one third page art:0020294-A
Rear jacking point
[RE17800(ALL)01/89]
c. Turn the jack handle clockwise until the
wheel is completely off the ground.
[RE17900(ALL)05/91]
RWARNING
Never place the jack under the rocker
panels.
*
[RE21151(ALL)10/92]
one third page art:0020939-B
File:12cprea.ex
Update:Tue Aug 29 17:46:27 1995