
Remember: Anti-lock doesn’t change the time you need
to
get your foot up to the brake pedal or always decrease
stopping distance. If you get too close to the vehicle in
front
of you, you won’t have time to apply your brakes
if that vehicle suddenly slows or stops. Always leave
enough
room up ahead to stop, even though you have
anti-lock brakes.
Using Anti-Lock
Don’t pump the brakes. Just hold the brake pedal
down and let anti-lock work for you. You may feel
the system working, or you may notice some noise,
but this is normal,
ABS
ACTIVE
Braking in Emergencies
At some time, nearly every driver gets into a situation
that requires hard braking.
If
you have anti-lock, you can steer and brake at the
same time. However,
if you don’t have anti-lock, your
first reaction
-- to hit the brake pedal hard and hold it
down
-- may be the wrong thing to do. Your wheels can
stop rolling. Once they
do, the vehicle can’t respond to
your steering. Momentum will carry it in whatever
direction it was headed when the wheels stopped rolling.
That could
be off the road, into the very thing you were
trying to avoid, or into traffic.
If you don’t have anti-lock, use a “squeeze” braking
technique. This will give you maximum braking while
maintaining steering control.
You do this by pushing on
the brake pedal with steadily increasing pressure.
In an emergency, you will probably want
to squeeze the
brakes hard without locking the wheels. If you hear or
feel the wheels sliding, ease off the brake pedal. This
will help you retain steering control.
(If you do have
anti-lock, it’s different:
see “Anti-Lock Brakes” in
the Index.)
When
your anti-lock system
is adjusting brake pressure
to help avoid a braking skid,
this light will come on. See
“Anti-Lock Brake System
Active Light” in the Index.
In many emergencies, steering can help you more than
even the very best braking.
IC-0
ProCarManuals.com

Steering
Power Steering
If you lose power steering assist because the engine
stops or the system is not functioning, you can steer but
it will take much more effort.
Steering Tips
Driving on Curves
It’s important to take curves at a reasonable speed.
A lot of the “driver lost control” accidents mentioned on
the news happen on curves. Here’s why:
Experienced
driver or beginner, each of us is subject to
the same laws of physics when driving on curves. The
traction of the tires against the road surface makes it
possible for the vehicle to change.its path when you turn
the front wheels.
If there’s no traction, inertia will keep
the vehicle going in the same direction.
If you’ve ever
tried
to steer a vehicle on wet ice, you’ll understand this.
The traction you can get in a curve depends on the
condition
of your tires and the road surface, the angle at
which the curve is banked, and your speed. While you’re
in a curve, speed is the one factor you can control. Suppose
you’re steering through a sharp curve.
Then you suddenly apply the brakes. Both control
systems
-- steering and braking -- have to do
their work where the tires meet the road. Unless
you
have four-wheel anti-lock brakes, adding the hard
braking can demand too much
of those places. You
can lose control.
The same thing can happen if you’re steering through
a
sharp curve. and you suddenly accelerate. Those two
control systems
-- steering and acceleration -- can
overwhelm those places where the tires meet the road
and make you lose control.
What should you do
if this ever happens? Ease up on the
brake or accelerator pedal, steer the vehicle the way you
want it to go, and slow. down.
Speed limit signs near curves warn that you should
adjust your speed. Of course, the posted speeds
are
based on good weather and road conditions. Under less
favorable conditions you’ll want to
go slower.
If you need to reduce your speed as you approach a
curve, do it before you enter the curve, while your front
wheels are straight ahead.
Try to adjust your speed
so you can “drive” though the
curve. Maintain a reasonable, steady speed. Wait to
accelerate until you are out of the curve, and then
accelerate gently into the straightaway.
4-9
ProCarManuals.com

Steering in Emergencies
There are times when steering can be more effective
than braking. For example, you come over a hill and
find
a truck stopped in your lane, or a car suddenly pulls
out from nowhere, or a chlld darts out from between
parked cars and
stops right in front of you. You can
avoid these
problems by braking -- if you can stop
in time, But sometimes you can’t; there isn’t room.
That’s the time for evasive action -- steering around
the problem.
Your Geo can perform very well in emergencies
like
these. First apply your brakes -- but, unless you have
anti-lock, not
enough to lock your wheels. (See
“Braking in Emergencies’’ earlier in this section.) It
is
better to remove as much speed as you can from a
possible collision. Then steer
around the problem, to the
left or right depending
on the space available, An
emergency like this requires close attention
and a
quick decision. If you are holding the steering wheel at
the recommended 9 and 3 o’clock positions, you can
turn it a full 180 degrees very quickly without removing
either hand. But you have to act fast, steer quickly, and
just as quickly straighten the wheel once
you have
avoided the object.
The fact that such emergency situations
are always
possible
is a good reason to practice defensive driving at
all times and
wear safety belts properly.
4-10
ProCarManuals.com

Off-Road Recovery
You may find sometime that your right wheels have
dropped
off the edge of a road onto the shoulder while
you’re driving.
If the level of the shoulder is only slightly below the
pavement, recovery should
be fairly easy. Ease off the
accelerator and then, if there is nothing in the way, steer so
that your vehicle straddles the edge of the pavement. You
can turn the steering wheel up to one-quarter turn until the
right fiont tire contacts the pavement edge. Then
turn your
steering wheel
to go straight down the roadway.
Passing
The driver of a vehicle about to pass another on a
two-lane highway waits for just the right moment,
accelerates, moves around the vehicle ahead, then goes
back into the right lane again.
A simple maneuver?
Not necessarily! Passing another vehicle on a two-lane
highway is a potentially dangerous move, since the
passing vehicle occupies the same lane as oncoming
I
traffic for several seconds. A miscalculation, an error in
judgment, or a brief surrender to frustration or anger can
suddenly put the passing driver face to face with the
worst of all traffic accidents
-- the head-on collision.
So here are some tips for passing:
“Drive ahead.” Look down the road, to the sides and to
crossroads for situations that might affect your passing
patterns.
If you have any doubt whatsoever about
making a successful pass, wait for
a better time.
Watch for traffic signs, pavement markings and lines.
If you can see a sign up ahead that might indicate a
turn or an intersection, delay your pass. A broken
center line usually indicates it’s all right to pass
(providing the road ahead is clear).
Never cross a solid
line on your side of the lane or a double solid line,
even
if the road seems empty of approaching traffk.
ProCarManuals.com

Skidding
In a skid, a driver can lose control of the vehicle.
Defensive drivers avoid most skids by taking
reasonable care suited to existing conditions, and
by not “overdriving” those conditions, But skids
are always possible.
The three types of skids correspond to your Geo’s three
control systems. In the braking skid, your wheels aren’t
rolling. In the steering or cornering skid, too much speed
or steering in a curve causes tires to slip and lose
cornering force. And in the acceleration skid, too much
throttle causes the driving wheels to
spin.
A cornering skid and an acceleration skid are best
handled by easing your foot
off the accelerator pedal.
If your vehicle starts to slide, ease your foot
off the
accelerator pedal and quickly steer the way you want
the
vehicle to go. If you start steering quickly enough, your
vehicle may straighten
out. Always be ready for a
second
skid if it occurs.
Of course, traction is reduced when water, snow, ice,
gravel or other material
is on the road. For safety, you’ll
want to slow down and adjust your driving to
these
conditions. It is important to slow down on slippery
surfaces because stopping distance will be longer and
vehicle control more limited.
mle driving on a surface with reduced traction, try your
best to avoid sudden steering, acceleration or braking (including engine braking by shifting
to a lower gear).
Any sudden changes could cause the tires to slide. You
may not realize the surface is slippery until your vehicle
is skidding. Learn to recognize warning clues
-- such as
enough water, ice
or packed snow on the road to make a
“,mirrored surface”
-- and slow down when you have
any doubt.
If you have the anti-lock braking system, remember: It
helps avoid only the braking skid. If you do not have
anti-lock, then in a braking skid (where the wheels are
no longer rolling), release enough pressure
on the brakes
to get the wheels rolling again. This restores steering
control. Push the brake pedal down steadily when you
have
to stop suddenly. As long as the wheels are rolling,
you will have steering control.
4-13 ProCarManuals.com

Controlling your vehicle is the key to successful
off-road driving. One
of the best ways to control your
vehicle is to control your speed. Here are some things to
keep in mind.
At higher speeds:
you approach things faster and you have less time to
scan the terrain for obstacles.
0 you have less time to react.
you have more vehicle bounce when you drive
you’ll need more distance for braking, especially
over
obstacles.
since you’re on an unpaved surface.
~~
~
When you’re driving off-road, bouncing and
quick changes in direction can easily throw you
out of position. This could cause
you to lose
control and crash.
So, whether you’re driving on
or off the road,
you and your passengers should
wear safety belts.
Scanning the Terrain
Off-road driving can take you over many different
kinds
of terrain. You need to be familiar with the
terrain and its many different features. Here are some
things to consider.
Surface Conditions. Off-roading can take you over
hard-packed dirt, gravel, rocks, grass, sand, mud, snow
or ice. Each of these surfaces affects the steering,
acceleration and braking
of your vehicle in different
ways. Depending upon the kind of surface you
are
on, you may experience slipping, sliding, wheel
spinning, delayed acceleration, poor traction and
Surface Obstacles. Unseen or hidden obstacles can
be hazardous. A rock, log, hole, rut or bump can
startle you if you’re not prepared for them. Often
these obstacles are hidden
by grass, bushes, snow or
even the rise and fall of the terrain itself. Here are some
things to consider:
I longer braking distances.
0 Is the path ahead clear?
0 Will the surface texture change abruptly up ahead?
I Does the travel take you uphill or downhill? (There’s
more discussion of
these subjects later.)
4-17
1. ProCarManuals.com

Will you have to stop suddenly or change
direction quickly?
When you drive over obstacles or rough terrain, keep
a
firm grip on the steering wheel. Ruts, troughs or other
surface features can jerk the wheel out of your
hands if
you’re not prepared.
When you drive over bumps,
rocks, or other obstacles,
your wheels can leave the ground, If this, happens, even
with one
or two wheels, you can’t control the vehicle as
well
or at all.
Because
you will be on an unpaved surface, it’s
especially important to avoid sudden acceleration,
sudden turns
or sudden braking. In
a way, off-road driving requires
a different kind of
alertness from driving on paved roads and highways.
There are
no road signs, posted speed limits or signal
lights, You have to use your own good judgment about
what is
safe and what isn’t.
Drinking and driving can
be very dangerous on any
road. And this is certainly true for off-road driving. At
the very time you need special alertness and driving
skills, your reflexes, perceptions and judgment
can be
affected
by even a small amount of alcoh’ol. You could
have a serious
-- or even fatal 7- accident if you dx-ink
and drive or ride with a driver who has been drinking.
See “Drunken Driving”
in the Index.
4-18
ProCarManuals.com

Driving Uphill
Once you decide you can safely drive up the hill, you
need to take some special steps.
0
0
0
Use a low gear and get a firm grip on the
steering wheel.
Get
a smooth start up the hill and try to maintain
your speed. Don’t use more power than you need,
because you don’t want your wheels to start spinning
or sliding.
Try to drive straight up the hill if at all possible. If
the path twists and turns, you might want to find
another route.
/A CAUTION:
I
0
0
0
0
Ease up on your speed as you approach the top of
the hill.
Attach a
flag to the vehicle to make you more visible
to approaching traffic
on trails or hills.
Sound the horn as
you approach the top of the hill to
let opposing traffic know you’re there.
Use your headlamps even during the day. They make
you more visible to oncoming traffic.
-
nrning or driving across steep hills can be
dangerous.
You could lose traction, slide
sideways, and possibly roll over.
You could be
seriously injured
or killed. When driving up hills,
always try
to go straight up.
A CAUTION:
Driving to the top (crest) of a hill at full speed can
cause an accident. There could be
a drop-off,
embankment,
cliff, or even another vehicle. You
could be seriously injured or killed. As you near
the top of
a hill, slow down and stay alert.
4-20
ProCarManuals.com