Garage Door Opener Compartment
If you have a garage door opener, the front overhead compartment can be
used to conveniently store the opener.
To install the garage
door opener, first open
the compartment door
by pressing the release
button forward.
Peel the protective
backing from the
hook
and loop patch. Press
it firmly to the back of
your garage door
opener, as close
to the
center
of the opener as
possible.
Center the garage door
opener activation
button over
the
console door button,
and press the opener
firmly into place.
2-62
ProCarManuals.com
The pegs inside the
compartment door are
used to make sure the
button
on the
compartment door
will contact the
control button on the
garage door opener.
Add one peg at
a time
until the
PUSH button
on the compartment
door operates the
garage door opener,
with the compartment
door closed, when
you
push the button
marked
PUSH.
With the garage door opener positioned properly and the right number of
pegs in place, you should only have to push the PUSH button slightly to
operate the opener.
Adjust the position
of the garage door opener and add or remove pegs, as
needed, until the opener operates properly.
2-63
ProCarManuals.com
